IMG
|
I want to use GeeXboX 2.0 with the IGEPv2 board. I’ve tried with recent builds from source with OpenBricks (r14129 to be exact), and also the last available pre-built snapshot (r13172). I got it to build okay, but have problems when trying to boot it.
The first is that the Linux kernel is not built with CONFIG_LBDAF (even the pre-built snapshot) and so it quickly dies on bootup when trying to mount the Ext4 partition. I fixed that for my self-built r14129 version by tweaking the kernel config file it uses.
The second is that when it does boot, there doesn’t appear to be any firmware, or divers or something, since it fails to find the video card, sound card, wireless device or USB network gadget (and hence the X server and thus XBMC can’t start). Is there something I missed in the configuration/build process that provides this? I tried including everything I thought might be a candidate via make menuconfig but no go.
|
tomlohave
|
Hi,
you should post this to the devel mailing list.
I haven’t got such card, so difficult to help. At least, please, submit what you found with a patch.
If you know which specific driver you need, we can add them
|
IMG
|
A patch for what? The LBDAF change? Will do.
I don’t know what drivers I need really, I just thought that if I just followed the build instructions it would work…
|
tomlohave
|
Did you install the power sgx drivers ?
|
IMG
|
I think so, I used the defconfig in config/defconfigs/geexbox-xbmc-omap3-igepv2.conf and though I turned on more stuff like SSH server, some XBMC stuff, I didn’t change any core things. i.e. there is nothing in the defconfig enabled that is not in my config. Things like CONFIG_PKG_sgx530-OpenGLES=y, CONFIG_PKG_sgx530-OMAP34xx-drv=y, CONFIG_PKG_xf86-video-omapfb=y
|
IMG
|
(Although in make menuconfig the Features > Graphics Drivers section is empty)
|
tomlohave
|
Do you have some kernel logs
|
IMG
|
From when it boots or dmesg you mean? I can post them this evening.
|
IMG
|
Here’s the dmesg output (long post, sorry, not possible to upload as attachment?)
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.14 (igrant@kobe) (gcc version 4.6.3 (Linaro GCC 4.6-2012.03) ) #1 Mon Apr 16 20:42:32 CEST 2012
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: IGEP v2 board
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 108544
[ 0.000000] free_area_init_node: node 0, pgdat c0522d24, node_mem_map c053f000
[ 0.000000] Normal zone: 884 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 107660 pages, LIFO batch:31
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 107660
[ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rootwait omapfb.mode=dvi:1280x720MR-32@60 omapfb.vram=0:8M,1:4M mem=442M
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 424MB = 424MB total
[ 0.000000] Memory: 424816k/424816k available, 27792k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdc000000 - 0xf8000000 ( 448 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdba00000 ( 442 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04ba000 (4808 kB)
[ 0.000000] .init : 0xc04ba000 - 0xc04e6000 ( 176 kB)
[ 0.000000] .data : 0xc04e6000 - 0xc05233c0 ( 245 kB)
[ 0.000000] .bss : 0xc05233e4 - 0xc053ea60 ( 110 kB)
[ 0.000000] NR_IRQS:410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000274] Calibrating delay loop... 497.82 BogoMIPS (lpj=1941504)
[ 0.039093] pid_max: default: 32768 minimum: 301
[ 0.039337] Mount-cache hash table entries: 512
[ 0.039916] Initializing cgroup subsys cpuacct
[ 0.039947] Initializing cgroup subsys devices
[ 0.039978] Initializing cgroup subsys freezer
[ 0.040008] Initializing cgroup subsys blkio
[ 0.040069] CPU: Testing write buffer coherency: ok
[ 0.041381] devtmpfs: initialized
[ 0.047363] print_constraints: dummy:
[ 0.047882] NET: Registered protocol family 16
[ 0.048400] GPMC revision 5.0
[ 0.052307] OMAP GPIO hardware version 2.5
[ 0.055999] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.056152] IGEP2: Hardware Revision B/C (B compatible)
[ 0.059539] Reprogramming SDRC clock to 224791666 Hz
[ 0.059570] dpll3_m2_clk rate change failed: -22
[ 0.074462] omap-mcbsp.2: alias fck already exists
[ 0.074981] omap-mcbsp.3: alias fck already exists
[ 0.077148] OMAP DMA hardware revision 4.0
[ 0.104431] bio: create slab at 0
[ 0.106262] print_constraints: vwlan: 3300 mV normal
[ 0.108734] SCSI subsystem initialized
[ 0.112487] usbcore: registered new interface driver usbfs
[ 0.113098] usbcore: registered new interface driver hub
[ 0.113464] usbcore: registered new device driver usb
[ 0.114593] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz
[ 0.115600] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz
[ 0.119415] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.119567] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.120483] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.123291] print_constraints: VUSB1V5: 1500 mV normal standby
[ 0.124267] print_constraints: VUSB1V8: 1800 mV normal standby
[ 0.125244] print_constraints: VUSB3V1: 3100 mV normal standby
[ 0.127197] twl4030_usb twl4030_usb: HW_CONDITIONS 0x40/64; link 0
[ 0.127441] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.130249] print_constraints: VIO: 1800 mV normal standby
[ 0.131317] print_constraints: VMMC1: 1850 3150 mV at 3150 mV normal standby
[ 0.132324] print_constraints: VDVI: 1800 mV normal standby
[ 0.134307] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.135559] Switching to clocksource 32k_counter
[ 0.135864] FS-Cache: Loaded
[ 0.136474] CacheFiles: Loaded
[ 0.169769] NET: Registered protocol family 2
[ 0.170074] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.170654] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.171081] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.171356] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.171356] TCP reno registered
[ 0.171386] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.171417] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.171752] NET: Registered protocol family 1
[ 0.172210] RPC: Registered named UNIX socket transport module.
[ 0.172241] RPC: Registered udp transport module.
[ 0.172241] RPC: Registered tcp transport module.
[ 0.172271] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.173980] omap_dsp_init: 600000 bytes @ 9a800000
[ 0.197265] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.198669] msgmni has been set to 829
[ 0.200103] io scheduler noop registered
[ 0.200103] io scheduler deadline registered
[ 0.200225] io scheduler cfq registered (default)
[ 0.203277] i2c-core: driver [adp8860_bl] using legacy suspend method
[ 0.203308] i2c-core: driver [adp8860_bl] using legacy resume method
[ 0.204254] OMAP DSS rev 2.0
[ 0.250610] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.253570] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 0.254180] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 0.254730] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 0.833770] console [ttyO2] enabled
[ 0.838836] [drm] Initialized drm 1.1.0 20060810
[ 0.860382] brd: module loaded
[ 0.872619] loop: module loaded
[ 0.879486] omap2-nand driver initializing
[ 0.884307] OneNAND driver initializing
[ 0.888580] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x20000000, virtual base dc0c0000, freq 0 MHz
[ 0.899810] OneNAND Manufacturer: Numonyx (0x20)
[ 0.899841] Muxed OneNAND(DDP) 512MB 1.8V 16-bit (0x58)
[ 0.905364] OneNAND version = 0x0031
[ 0.909179] Chip support all block unlock
[ 0.909179] Chip has 2 plane
[ 0.912963] Scanning device for bad blocks
[ 1.111785] Creating 5 MTD partitions on "omap2-onenand":
[ 1.117553] 0x000000000000-0x000000080000 : "X-Loader"
[ 1.125518] 0x000000080000-0x000000200000 : "U-Boot"
[ 1.133178] 0x000000200000-0x000000280000 : "Environment"
[ 1.141235] 0x000000280000-0x000000580000 : "Kernel"
[ 1.148864] 0x000000580000-0x000020000000 : "File System"
[ 1.158660] smsc911x: Driver version 2008-10-21
[ 1.165924] smsc911x-mdio: probed
[ 1.169586] smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
[ 1.179840] smsc911x smsc911x.0: eth0: MAC Address: aa:99:6c:f0:51:89
[ 1.187896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.194854] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.195068] ehci-omap ehci-omap.0: failed to get ehci port0 regulator
[ 2.198211] ehci-omap ehci-omap.0: phy reset operation timed out
[ 2.198242] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
[ 2.198272] ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park
[ 2.198303] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.204376] drivers/usb/core/inode.c: creating file 'devices'
[ 2.204406] drivers/usb/core/inode.c: creating file '001'
[ 2.205047] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.213073] ehci-omap ehci-omap.0: park 0
[ 2.213134] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 2.219146] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.219177] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 2.229522] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.235778] usb usb1: default language 0x0409
[ 2.235809] usb usb1: udev 1, busnum 1, minor = 0
[ 2.235839] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.243041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.250671] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.256286] usb usb1: Manufacturer: Linux 3.2.14 ehci_hcd
[ 2.262023] usb usb1: SerialNumber: ehci-omap.0
[ 2.267669] usb usb1: usb_probe_device
[ 2.267700] usb usb1: configuration #1 chosen from 1 choice
[ 2.267761] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.268218] hub 1-0:1.0: usb_probe_interface
[ 2.268249] hub 1-0:1.0: usb_probe_interface - got id
[ 2.268249] hub 1-0:1.0: USB hub found
[ 2.272277] hub 1-0:1.0: 3 ports detected
[ 2.276550] hub 1-0:1.0: standalone hub
[ 2.276550] hub 1-0:1.0: individual port power switching
[ 2.276580] hub 1-0:1.0: individual port over-current protection
[ 2.276611] hub 1-0:1.0: power on to power good time: 20ms
[ 2.276641] hub 1-0:1.0: local power source is good
[ 2.276672] hub 1-0:1.0: enabling power on all ports
[ 2.277313] drivers/usb/core/inode.c: creating file '001'
[ 2.277526] ehci-omap ehci-omap.0: ...powerup ports...
[ 2.309936] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
[ 2.321990] i2c /dev entries driver
[ 2.327850] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 2.378173] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 2.555419] ALSA device list:
[ 2.558624] No soundcards found.
[ 2.562530] TCP cubic registered
[ 2.566009] NET: Registered protocol family 17
[ 2.570770] NET: Registered protocol family 15
[ 2.575531] Registering the dns_resolver key type
[ 2.580596] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 2.588714] ThumbEE CPU extension supported.
[ 2.596557] clock: disabling unused clocks to save power
[ 2.604400] omapfb omapfb: no driver for display: dvi
[ 2.609802] omapfb omapfb: no displays
[ 2.613800] omapfb omapfb: failed to setup omapfb
[ 2.618774] omapfb: probe of omapfb failed with error -22
[ 2.625396] regulator_init_complete: VDVI: incomplete constraints, leaving on
[ 2.634552] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.641967] Waiting for root device /dev/mmcblk0p2...
[ 2.952453] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.963073] mmc0: new high speed SDHC card at address 0002
[ 2.969879] mmcblk0: mmc0:0002 00000 7.41 GiB
[ 2.977386] mmcblk0: p1 p2
[ 3.050506] mmc1: new SDIO card at address 0001
[ 3.082733] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
[ 3.093749] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
[ 4.940551] EXT4-fs (mmcblk0p2): recovery complete
[ 5.025970] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.034637] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 5.041534] Freeing init memory: 176K
[ 5.769531] bridgedriver: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.966827] proc_load: Processor Loaded /lib/dsp/baseimage.dof
>[ 5.980987] udevd[616]: starting version 181
[ 6.008605] proc_start: dsp in running state
[ 6.041503] DSP Bridge driver loaded
[ 7.782318] EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[ 7.815917] Registered led device: gpio-led:red:d0
[ 7.827423] Registered led device: gpio-led:green:d0
[ 7.847442] Registered led device: gpio-led:red:d1
[ 7.868438] Registered led device: gpio-led:green:d1
[ 8.022674] cfg80211: Calling CRDA to update world regulatory domain
[ 8.085815] libertas_sdio: Libertas SDIO driver
[ 8.090850] libertas_sdio: Copyright Pierre Ossman
[ 10.002288] omaplfb: OMAPLFB_Init: OMAPLFBInit failed
[ 11.286743] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xdc014000, IRQ: 336
[ 38.418487] libertas_sdio: failed to find firmware (-2)
[ 38.424591] libertas_sdio: probe of mmc1:0001:1 failed with error -2
|
IMG
|
Things I clocked were:
[ 2.604400] omapfb omapfb: no driver for display: dvi
[ 2.609802] omapfb omapfb: no displays
[ 2.613800] omapfb omapfb: failed to setup omapfb
[ 2.618774] omapfb: probe of omapfb failed with error -22
[ 2.555419] ALSA device list:
[ 2.558624] No soundcards found.
[ 38.418487] libertas_sdio: failed to find firmware (-2)
[ 38.424591] libertas_sdio: probe of mmc1:0001:1 failed with error -2
|
IMG
|
And here’s the dmesg from the same board running the Poky Linux distro that comes pre-loaded onto the NAND flash (where the video, sound, wireless and USB OTG ethernet gadget all work):
root@igep00x0:~# dmesg
[ 0.000000] Linux version 2.6.37 (eballetbo@jupiter) (gcc version 4.3.3 (GCC) ) #1 Thu Mar 1 11:48:31 CET 2012
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: IGEP0020 board
[ 0.000000] IGEP: IGEP0020 machine + IGEP0022 (buddy)
[ 0.000000] IGEP: IGEP0020 machine + IGEP0022 (buddy)
[ 0.000000] Reserving 41943040 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720mhz )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
[ 0.000000] On node 0 totalpages: 99840
[ 0.000000] free_area_init_node: node 0, pgdat c063a214, node_mem_map c0685000
[ 0.000000] Normal zone: 860 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 98980 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 98980
[ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 mem=430M omapfb.mode=dvi:1024x768MR-16@60 vram=40M omapfb.vram=0:12M,1:16M,2:12M smsc911x.mac=0x00,0x12,0xd2,0x00,0x20,0x01 root=/dev/mtdblock2 rootfstype=jffs2 buddy=igep0022 buddy=igep0022
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 390MB = 390MB total
[ 0.000000] Memory: 388788k/388788k available, 51532k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xdb000000 - 0xf8000000 ( 464 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdae00000 ( 430 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0041000 ( 228 kB)
[ 0.000000] .text : 0xc0041000 - 0xc05f7044 (5849 kB)
[ 0.000000] .data : 0xc05f8000 - 0xc0643320 ( 301 kB)
[ 0.000000] NR_IRQS:409
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz
[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] GPMC revision 5.0
[ 0.000000] Trying to install interrupt handler for IRQ402
[ 0.000000] Trying to install interrupt handler for IRQ403
[ 0.000000] Trying to install interrupt handler for IRQ404
[ 0.000000] Trying to install interrupt handler for IRQ405
[ 0.000000] Trying to install interrupt handler for IRQ406
[ 0.000000] Trying to install interrupt handler for IRQ407
[ 0.000000] Trying to install interrupt handler for IRQ408
[ 0.000000] Trying to install type control for IRQ409
[ 0.000000] Trying to set irq flags for IRQ409
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Calibrating delay loop... 719.47 BogoMIPS (lpj=2809856)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Security Framework initialized
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] regulator: core version 0.5
[ 0.000000] regulator: dummy:
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.000000] IGEP: Hardware Rev. B
[ 0.000000] IGEP: Could not obtain gpio MCP251X NRESET
[ 0.000000] IGEP: initializing OneNAND memory device
[ 0.000000] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.000000] OMAP DMA hardware revision 4.0
[ 0.021545] bio: create slab at 0
[ 0.022735] regulator: VDD 3V3: 3300 mV normal
[ 0.024291] SCSI subsystem initialized
[ 0.027648] usbcore: registered new interface driver usbfs
[ 0.028015] usbcore: registered new interface driver hub
[ 0.028289] usbcore: registered new device driver usb
[ 0.029479] omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz
[ 0.032562] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.032592] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.033172] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.036895] regulator: VUSB1V5: 1500 mV normal standby
[ 0.037506] regulator: VUSB1V8: 1800 mV normal standby
[ 0.038116] regulator: VUSB3V1: 3100 mV normal standby
[ 0.039703] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.042419] regulator: VIO: 1800 1850 mV at 1800 mV normal standby
[ 0.043121] regulator: VMMC1: 1850 3150 mV at 3000 mV normal standby
[ 0.043731] regulator: VDAC: 1800 mV normal standby
[ 0.044647] regulator: VPLL2: 1800 mV normal standby
[ 0.044891] omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz
[ 0.045532] omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz
[ 0.047454] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.048767] cfg80211: Calling CRDA to update world regulatory domain
[ 0.049682] Switching to clocksource 32k_counter
[ 0.068389] musb-hdrc: version 6.0, otg (peripheral+host), debug=0
[ 0.068542] musb-hdrc musb-hdrc.0: dma type: dma-inventra
[ 0.068603] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.068634] musb-hdrc: MHDRC RTL version 1.400
[ 0.068664] musb-hdrc: setup fifo_mode 5
[ 0.068664] musb-hdrc: 28/31 max ep, 8192/16384 memory
[ 0.068878] musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 0.069396] NET: Registered protocol family 2
[ 0.069610] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.070068] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.070404] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.070617] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.070617] TCP reno registered
[ 0.070648] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.070678] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.070892] NET: Registered protocol family 1
[ 0.071228] RPC: Registered udp transport module.
[ 0.071258] RPC: Registered tcp transport module.
[ 0.071289] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.072296] platform iva.0: Enabled OPP corresponding to 720MHz
[ 0.073486] omap-iommu omap-iommu.0: isp registered
[ 0.075317] VFS: Disk quotas dquot_6.5.2
[ 0.075408] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.076416] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.076904] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.077819] msgmni has been set to 759
[ 0.079162] io scheduler noop registered
[ 0.079193] io scheduler deadline registered
[ 0.079345] io scheduler cfq registered (default)
[ 0.136047] OMAP DSS rev 2.0
[ 0.159362] OMAP RFBI rev 1.0
[ 0.159484] OMAP DISPC rev 3.0
[ 0.159515] OMAP VENC rev 2
[ 0.159759] omapdss supply vdds_sdi not found, using dummy regulator
[ 0.159881] OMAP DSI rev 1.0
[ 0.488861] [drm] Initialized drm 1.1.0 20060810
[ 0.489013] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 0.489410] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 0.489776] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 1.181854] console [ttyO2] enabled
[ 1.195556] brd: module loaded
[ 1.203582] loop: module loaded
[ 1.207000] at24 2-0050: 128 byte 24c01 EEPROM (writable)
[ 1.217651] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.224456] omap2-nand driver initializing
[ 1.229003] OneNAND driver initializing
[ 1.233184] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x20000000, virtual base db080000
[ 1.243225] OneNAND Manufacturer: Numonyx (0x20)
[ 1.243255] Muxed OneNAND(DDP) 512MB 1.8V 16-bit (0x58)
[ 1.248718] OneNAND version = 0x0031
[ 1.252471] Chip support all block unlock
[ 1.252471] Chip has 2 plane
[ 1.255493] Scanning device for bad blocks
[ 1.435974] Creating 3 MTD partitions on "omap2-onenand":
[ 1.441650] 0x000000000000-0x000000080000 : "X-Loader"
[ 1.448730] 0x000000080000-0x000000c80000 : "Boot"
[ 1.455078] 0x000000c80000-0x000020000000 : "File System"
[ 1.464508] smsc911x: Driver version 2008-10-21.
[ 1.470825] smsc911x-mdio: probed
[ 1.474456] eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=0:01, irq=-1)
[ 1.483825] net eth0: MAC Address: 00:12:d2:00:20:01
[ 1.489440] usbcore: registered new interface driver asix
[ 1.495300] usbcore: registered new interface driver cdc_ether
[ 1.501556] usbcore: registered new interface driver net1080
[ 1.507659] usbcore: registered new interface driver cdc_subset
[ 1.514007] usbcore: registered new interface driver zaurus
[ 1.520050] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.534210] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.540222] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.548248] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 2.565551] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.571655] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.578765] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.586364] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.591918] usb usb1: Manufacturer: Linux 2.6.37 ehci_hcd
[ 2.597595] usb usb1: SerialNumber: ehci-omap.0
[ 2.603179] hub 1-0:1.0: USB hub found
[ 2.607177] hub 1-0:1.0: 3 ports detected
[ 2.636047] Initializing USB Mass Storage driver...
[ 2.641418] usbcore: registered new interface driver usb-storage
[ 2.647735] USB Mass Storage support registered.
[ 2.652801] usbcore: registered new interface driver libusual
[ 2.658996] usbcore: registered new interface driver usbtest
[ 2.665008] g_ether gadget: using random self ethernet address
[ 2.671173] g_ether gadget: using random host ethernet address
[ 2.677825] usb0: MAC 2e:bb:08:bb:76:3b
[ 2.681884] usb0: HOST MAC b2:b4:e9:6a:e7:b3
[ 2.686462] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 2.693450] g_ether gadget: g_ether ready
[ 2.697662] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
[ 2.703308] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
[ 2.711151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.718292] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.725860] usb usb2: Product: MUSB HDRC host driver
[ 2.731079] usb usb2: Manufacturer: Linux 2.6.37 musb-hcd
[ 2.736724] usb usb2: SerialNumber: musb-hdrc.0
[ 2.742279] hub 2-0:1.0: USB hub found
[ 2.746276] hub 2-0:1.0: 1 port detected
[ 2.751434] mice: PS/2 mouse device common for all mice
[ 2.757873] input: TWL4030 Keypad as /devices/platform/omap/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0
[ 2.771484] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[ 2.783630] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 2.790557] twl_rtc twl_rtc: Power up reset detected.
[ 2.796691] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 2.802581] i2c /dev entries driver
[ 2.807586] Linux media interface: v0.10
[ 2.811889] Linux video capture interface: v2.00
[ 2.817138] usbcore: registered new interface driver uvcvideo
[ 2.823150] USB Video Class driver (v1.0.0)
[ 2.829833] mmci-omap-hs.0 supply vmmc_aux not found, using dummy regulator
[ 2.839752] mmci-omap-hs.1 supply vmmc_aux not found, using dummy regulator
[ 2.848358] Registered led device: d440:red
[ 2.848632] Registered led device: d440:green
[ 2.848876] Registered led device: d240:red
[ 2.850524] Registered led device: d240:green
[ 2.850738] omap_sham_mod_init: loading omap-sham driver
[ 2.856353] omap_sham_mod_init: Unsupported cpu
[ 2.861083] omap_aes_mod_init: loading omap-aes driver
[ 2.866485] omap_aes_mod_init: Unsupported cpu
[ 2.872070] usbcore: registered new interface driver usbhid
[ 2.877899] usbhid: USB HID core driver
[ 2.884490] IGEP SoC init
[ 2.982452] asoc: twl4030-hifi omap-mcbsp-dai.1 mapping ok
[ 2.992706] ALSA device list:
[ 2.995849] #0: igep
[ 2.998565] TCP cubic registered
[ 3.001922] Initializing XFRM netlink socket
[ 3.006439] NET: Registered protocol family 17
[ 3.011169] NET: Registered protocol family 15
[ 3.015869] L2TP core driver, V2.0
[ 3.019439] lib80211: common routines for IEEE802.11 drivers
[ 3.025360] lib80211_crypt: registered algorithm 'NULL'
[ 3.025390] Registering the dns_resolver key type
[ 3.030395] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 3.038940] ThumbEE CPU extension supported.
[ 3.046600] Power Management for TI OMAP3.
[ 3.052032] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[ 3.060302] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[ 3.068786] SmartReflex Class3 initialized
[ 3.073089] clock: disabling unused clocks to save power
[ 3.080963] mmc1: new SDIO card at address 0001
[ 3.087463] fbcvt: 1024x768@60: CVT Name - .786M3-R
[ 3.363464] Console: switching to colour frame buffer device 128x48
[ 3.387390] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.396179] omap_vout omap_vout: probed for an unknown device
[ 5.433624] Empty flash at 0x0dba78a4 ends at 0x0dba8000
[ 26.065368] VFS: Mounted root (jffs2 filesystem) on device 31:2.
[ 26.072021] Freeing init memory: 228K
[ 27.269348] udevd (673): /proc/673/oom_adj is deprecated, please use /proc/673/oom_score_adj instead.
[ 27.279113] udev: starting version 141
[ 31.120330] Bluetooth: Core ver 2.15
[ 31.124206] NET: Registered protocol family 31
[ 31.128906] Bluetooth: HCI device and connection manager initialized
[ 31.135559] Bluetooth: HCI socket layer initialized
[ 31.169158] spi1.1 supply vcc not found, using dummy regulator
[ 31.209625] ads7846 spi1.1: touchscreen, irq 315
[ 31.277923] usbcore: registered new interface driver usbserial
[ 31.284027] usbserial: USB Serial Driver core
[ 31.300292] input: ADS7846 Touchscreen as /devices/platform/omap2_mcspi.1/spi1.1/input/input2
[ 31.490325] CAN device driver interface
[ 31.503051] Bluetooth: L2CAP ver 2.15
[ 31.506896] Bluetooth: L2CAP socket layer initialized
[ 31.658905] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 31.721038] USB Serial support registered for GSM modem (1-port)
[ 31.727569] usbcore: registered new interface driver option
[ 31.733459] option: v0.7.2:USB Driver for GSM modems
[ 32.214630] Bluetooth: RFCOMM TTY layer initialized
[ 32.219757] Bluetooth: RFCOMM socket layer initialized
[ 32.225189] Bluetooth: RFCOMM ver 1.11
[ 32.831298] mcp251x spi1.0: MCP251x didn't enter in conf mode after reset
[ 32.854644] mcp251x spi1.0: Probe failed
[ 32.858795] mcp251x spi1.0: probe failed
[ 33.158447] libertas_sdio: Libertas SDIO driver
[ 33.163238] libertas_sdio: Copyright Pierre Ossman
[ 34.542022] net eth0: MAC Address: 00:12:d2:00:20:01
[ 34.675537] net eth0: SMSC911x/921x identified at 0xdb07c000, IRQ: 336
[ 34.975219] libertas: 00:0b:6c:90:4b:42, fw 9.70.3p36, cap 0x00000303
[ 34.981994] libertas: unidentified region code; using the default (USA)
[ 34.996185] cfg80211: Calling CRDA for country: US
[ 35.008514] libertas: wlan0: Marvell WLAN 802.11 adapter
|
