GeeXboX

[ solved ] HDMI – no sound (nvidia geforce 570 gtx)

April 30th, 2012 Leave a comment Go to comments

Home › Forums › GeeXboX for PC › [ solved ] HDMI – no sound (nvidia geforce 570 gtx)

Tagged: ,

This topic has 3 voices, contains 21 replies, and was last updated by tomlohave 6 days ago.

Viewing 15 posts – 1 through 15 (of 22 total)
1 2
Author Posts
Author Posts
April 21, 2012 at 09:25 #3604

jesters_ice

Hi there,

GeeXboX runs very smooth on my system (booting from USB, used Unetbootin), there is just one small problem I just can’t figure out: I can’t get any sound over HDMI. Tried all combinations in the Audio output settings. Also tried deactivating on-board sound to be sure no other device is the cause.
I’m able to switch between the device options ‘Defaults’, ‘Custom’, iec958′ and ‘hdmi’. Disabled both ‘capable receiver’ options, which doesn’t help.

My linux knowledge is practically nonexistent (sorry about that ;( ), so any step-by-step instructions for solving the problem are much appreciated.

Thanks in advance.

  • This reply was modified 7 days ago by tomlohave.
April 21, 2012 at 10:12 #3605

tomlohave

hi,

first, you need persistent data (see documentation)
switch to console (CTRL+ALT+F2)
login : root
password : root
execute :
vi /etc/audio

search the line with analogic, and replace by hdmi
(INS to enter text, then in order : execute the sequence : “ECHAP : w q” to save )
reboot

  • This reply was modified 16 days ago by tomlohave.
April 21, 2012 at 10:13 #3606

tomlohave

and use the latest devel iso : http://download.openbricks.org/r14192/
April 21, 2012 at 11:32 #3608

jesters_ice

Thanks for your help.

I changed the line, but still no sound. I double-checked if the changes were really saved (which is the case).

Is it crucial to use the latest devel iso? I picked the 64-bit stable release to begin with. Or are there no important differences between i386 and x86_64 ?
April 21, 2012 at 12:44 #3609

tomlohave

forgot to say : you need xf86-video-nvidia
take the latest i386 iso for tests
X86_64 is undeer construct :-)

April 22, 2012 at 09:24 #3617

jesters_ice

Okay, so I used the latest i386 iso.

Since I didn’t know how to work the opk stuff, I found another thread in the forums (http://www.geexbox.org/forum/topic/nvidia-card/):

boot on geexbox
switch to vt2
cd /.root
opkg remove xf86-video-nvidia
opkg install –force-overwrite xf86-video-nvidia-legacy_173.14.30-1_i686.opk
reboot

But I get ‘No packages were removed’ message. I tried to simply ignore that and installed the ‘xf86-video-nvidia-legacy_173.14.31-1_i686.opk’

reboot command didn’t work somehow, so I rebooted manually. When then trying to start GeeXboX, I get the splash screen, then it stops at the console (login prompt).

I’m actually sure I’m doing something wrong ;) Thanks for your patience!
April 22, 2012 at 09:32 #3618

tomlohave

for your card , you need the nvdidia classic drivers, not legacy, nor old., No need to remove them at first boot because the nvidia driver is not installed … so :
if you have access to internet, the fast way : assuming you use r14192 and persistent)
switch to vt2, then do
———-
opkg install http://download.openbricks.org/r14192/xf86-video-nvidia_295.40-1_i686.opk
reboot
———-
the edit /etc/audio
April 24, 2012 at 10:38 #3628

jesters_ice

Thanks for pointing that out!

Don’t know why, but when I try to reboot after the opkg install, nothing really happens. For a very short moment there’s an error message I can’t actually make out, since it disappears very quick (something about ‘not able de/mount’..?), then the display is cleared, cursor blinking on top.

Manually rebooting after that and booting GeeXboX gives me the splashscreen, then the login prompt.

Internet access is available, r14192 used and persistent data.
April 24, 2012 at 15:13 #3631

tomlohave

post your xorg ‘s logs (in /var/log/Xorg.0.log) if you ‘ve got problem with nvidia
(or send it me )
April 25, 2012 at 02:04 #3633

cemoi71

hi jester,

I join you here for this problem, I have the same effect than you.
i have an atom mobo with nividia ion chip, with the same problem with hdmi.
and when i install the drivers happens the same effect than you.

i tom i’ll try to install the drivers again, and give you the xorg log.
is it all right?

a+
April 25, 2012 at 11:32 #3634

jesters_ice

Sorry for the wait. I even have to figure out the basic commands ;)

[3940998.439]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[3940998.439] X Protocol Version 11, Revision 0
[3940998.439] Build Operating System: Linux 2.6.38-14-generic x86_64 OpenBricks
[3940998.439] Current Operating System: Linux geexbox 3.3.2 #1 SMP Sat Apr 21 12:10:33 CEST 2012 i686
[3940998.439] Kernel command line: initrd=/initrd vga=789 persistent quiet splash loglevel=3 boot=casper — persistent BOOT_IMAGE=/vmlinuz
[3940998.439] Build Date: 21 April 2012 01:22:57PM
[3940998.439]
[3940998.439] Current version of pixman: 0.24.2
[3940998.439] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[3940998.439] Markers: (-) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[3940998.439] (==) Log file: “/var/log/Xorg.0.log”, Time: Wed Apr 25 19:07:40 2012
[3940998.441] (==) Using config directory: “/etc/X11/xorg.conf.d”
[3940998.441] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[3940998.485] (==) No Layout section. Using the first Screen section.
[3940998.485] (==) No screen section available. Using defaults.
[3940998.485] (**) |->Screen “Default Screen Section” (0)
[3940998.485] (**) | |->Monitor “”
[3940998.485] (==) No device specified for screen “Default Screen Section”.
Using the first device section listed.
[3940998.485] (**) | |->Device “Card0″
[3940998.485] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
[3940998.485] (==) Automatically adding devices
[3940998.485] (==) Automatically enabling devices
[3940998.486] (==) FontPath set to:
/usr/share/X11/fonts/misc,
built-ins
[3940998.486] (==) ModulePath set to “/usr/lib/xorg/modules”
[3940998.486] (**) Extension “Composite” is disabled
[3940998.486] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[3940998.486] (II) Loader magic: 0x82510c0
[3940998.486] (II) Module ABI versions:
[3940998.486] X.Org ANSI C Emulation: 0.4
[3940998.486] X.Org Video Driver: 11.0
[3940998.486] X.Org XInput driver : 16.0
[3940998.486] X.Org Server Extension : 6.0
[3940998.488] (-) PCI:*(0:5:0:0) 10de:1086:1acc:02ff rev 161, Mem @ 0xfd000000/16777216, 0xd8000000/134217728, 0xd6000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[3940998.488] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[3940998.488] (II) LoadModule: “extmod”
[3940998.488] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[3940998.521] (II) Module extmod: vendor=”X.Org Foundation”
[3940998.521] compiled for 1.11.3, module version = 1.0.0
[3940998.521] Module class: X.Org Server Extension
[3940998.521] ABI class: X.Org Server Extension, version 6.0
[3940998.521] (II) Loading extension MIT-SCREEN-SAVER
[3940998.521] (II) Loading extension XFree86-VidModeExtension
[3940998.521] (II) Loading extension XFree86-DGA
[3940998.521] (II) Loading extension DPMS
[3940998.521] (II) Loading extension XVideo
[3940998.521] (II) Loading extension XVideo-MotionCompensation
[3940998.521] (II) Loading extension X-Resource
[3940998.521] (II) LoadModule: “dbe”
[3940998.521] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[3940998.521] (II) Module dbe: vendor=”X.Org Foundation”
[3940998.521] compiled for 1.11.3, module version = 1.0.0
[3940998.521] Module class: X.Org Server Extension
[3940998.521] ABI class: X.Org Server Extension, version 6.0
[3940998.521] (II) Loading extension DOUBLE-BUFFER
[3940998.521] (II) LoadModule: “glx”
[3940998.521] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[3941000.072] (II) Module glx: vendor=”NVIDIA Corporation”
[3941000.072] compiled for 4.0.2, module version = 1.0.0
[3941000.072] Module class: X.Org Server Extension
[3941000.072] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:49:54 PDT 2012
[3941000.072] (II) Loading extension GLX
[3941000.072] (II) LoadModule: “record”
[3941000.096] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[3941000.153] (II) Module record: vendor=”X.Org Foundation”
[3941000.153] compiled for 1.11.3, module version = 1.13.0
[3941000.153] Module class: X.Org Server Extension
[3941000.153] ABI class: X.Org Server Extension, version 6.0
[3941000.153] (II) Loading extension RECORD
[3941000.153] (II) LoadModule: “dri”
[3941000.154] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[3941000.214] (II) Module dri: vendor=”X.Org Foundation”
[3941000.214] compiled for 1.11.3, module version = 1.0.0
[3941000.214] ABI class: X.Org Server Extension, version 6.0
[3941000.214] (II) Loading extension XFree86-DRI
[3941000.214] (II) LoadModule: “dri2″
[3941000.214] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[3941000.214] (II) Module dri2: vendor=”X.Org Foundation”
[3941000.214] compiled for 1.11.3, module version = 1.2.0
[3941000.214] ABI class: X.Org Server Extension, version 6.0
[3941000.214] (II) Loading extension DRI2
[3941000.214] (II) LoadModule: “nvidia”
[3941000.214] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[3941000.326] (II) Module nvidia: vendor=”NVIDIA Corporation”
[3941000.326] compiled for 4.0.2, module version = 1.0.0
[3941000.326] Module class: X.Org Video Driver
[3941000.388] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[3941000.388] (EE) NVIDIA: system’s kernel log for additional error messages.
[3941000.388] (II) UnloadModule: “nvidia”
[3941000.388] (II) Unloading nvidia
[3941000.388] (EE) Failed to load module “nvidia” (module-specific error, 0)
[3941000.388] (==) Matched nvidia as autoconfigured driver 0
[3941000.388] (==) Matched nouveau as autoconfigured driver 1
[3941000.388] (==) Matched nv as autoconfigured driver 2
[3941000.388] (==) Matched vesa as autoconfigured driver 3
[3941000.388] (==) Matched fbdev as autoconfigured driver 4
[3941000.388] (==) Assigned the driver to the xf86ConfigLayout
[3941000.388] (II) LoadModule: “nvidia”
[3941000.388] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[3941000.388] (II) Module nvidia: vendor=”NVIDIA Corporation”
[3941000.388] compiled for 4.0.2, module version = 1.0.0
[3941000.388] Module class: X.Org Video Driver
[3941000.388] (II) UnloadModule: “nvidia”
[3941000.388] (II) Unloading nvidia
[3941000.388] (II) Failed to load module “nvidia” (already loaded, 136420466)
[3941000.388] (II) LoadModule: “nouveau”
[3941000.388] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[3941000.473] (II) Module nouveau: vendor=”X.Org Foundation”
[3941000.473] compiled for 1.11.3, module version = 0.0.16
[3941000.473] Module class: X.Org Video Driver
[3941000.473] ABI class: X.Org Video Driver, version 11.0
[3941000.473] (II) LoadModule: “nv”
[3941000.473] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[3941000.473] (II) Module nv: vendor=”X.Org Foundation”
[3941000.473] compiled for 1.11.3, module version = 2.1.18
[3941000.473] Module class: X.Org Video Driver
[3941000.473] ABI class: X.Org Video Driver, version 11.0
[3941000.473] (II) LoadModule: “vesa”
[3941000.473] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[3941000.538] (II) Module vesa: vendor=”X.Org Foundation”
[3941000.538] compiled for 1.11.3, module version = 2.3.0
[3941000.538] Module class: X.Org Video Driver
[3941000.538] ABI class: X.Org Video Driver, version 11.0
[3941000.538] (II) LoadModule: “fbdev”
[3941000.538] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[3941000.576] (II) Module fbdev: vendor=”X.Org Foundation”
[3941000.576] compiled for 1.11.3, module version = 0.4.2
[3941000.576] ABI class: X.Org Video Driver, version 11.0
[3941000.576] (II) NOUVEAU driver
[3941000.576] (II) NOUVEAU driver for NVIDIA chipset families :
[3941000.576] RIVA TNT (NV04)
[3941000.576] RIVA TNT2 (NV05)
[3941000.576] GeForce 256 (NV10)
[3941000.576] GeForce 2 (NV11, NV15)
[3941000.576] GeForce 4MX (NV17, NV18)
[3941000.576] GeForce 3 (NV20)
[3941000.576] GeForce 4Ti (NV25, NV28)
[3941000.576] GeForce FX (NV3x)
[3941000.576] GeForce 6 (NV4x)
[3941000.576] GeForce 7 (G7x)
[3941000.576] GeForce 8 (G8x)
[3941000.576] GeForce GTX 200 (NVA0)
[3941000.576] GeForce GTX 400 (NVC0)
[3941000.576] (II) NOUVEAU driver
[3941000.576] (II) NOUVEAU driver for NVIDIA chipset families :
[3941000.576] RIVA TNT (NV04)
[3941000.576] RIVA TNT2 (NV05)
[3941000.576] GeForce 256 (NV10)
[3941000.576] GeForce 2 (NV11, NV15)
[3941000.576] GeForce 4MX (NV17, NV18)
[3941000.577] GeForce 3 (NV20)
[3941000.577] GeForce 4Ti (NV25, NV28)
[3941000.577] GeForce FX (NV3x)
[3941000.577] GeForce 6 (NV4x)
[3941000.577] GeForce 7 (G7x)
[3941000.577] GeForce 8 (G8x)
[3941000.577] GeForce GTX 200 (NVA0)
[3941000.577] GeForce GTX 400 (NVC0)
[3941000.577] (II) VESA: driver for VESA chipsets: vesa
[3941000.577] (II) FBDEV: driver for framebuffer: fbdev
[3941000.577] (++) using VT number 4

[3941000.577] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[3941000.577] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[3941000.591] drmOpenDevice: node name is /dev/dri/card0
[3941001.336] drmOpenByBusid: Searching for BusID pci:0000:05:00.0
[3941001.336] drmOpenDevice: node name is /dev/dri/card0
[3941001.336] drmOpenDevice: open result is 8, (OK)
[3941001.336] drmOpenByBusid: drmOpenMinor returns 8
[3941001.336] drmOpenByBusid: drmGetBusid reports pci:0000:05:00.0
[3941001.336] (II) [drm] nouveau interface version: 0.0.16
[3941001.336] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[3941001.336] (WW) Falling back to old probe method for vesa
[3941001.336] (WW) Falling back to old probe method for fbdev
[3941001.336] (II) Loading sub module “fbdevhw”
[3941001.336] (II) LoadModule: “fbdevhw”
[3941001.353] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[3941001.405] (II) Module fbdevhw: vendor=”X.Org Foundation”
[3941001.405] compiled for 1.11.3, module version = 0.0.2
[3941001.405] ABI class: X.Org Video Driver, version 11.0
[3941001.406] (II) Loading sub module “dri”
[3941001.406] (II) LoadModule: “dri”
[3941001.406] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[3941001.406] (II) Module dri: vendor=”X.Org Foundation”
[3941001.406] compiled for 1.11.3, module version = 1.0.0
[3941001.406] ABI class: X.Org Server Extension, version 6.0
[3941001.406] (II) NOUVEAU(0): Loaded DRI module
[3941001.406] drmOpenDevice: node name is /dev/dri/card0
[3941001.406] drmOpenDevice: open result is 9, (OK)
[3941001.406] drmOpenDevice: node name is /dev/dri/card0
[3941001.406] drmOpenDevice: open result is 9, (OK)
[3941001.406] drmOpenByBusid: Searching for BusID pci:0000:05:00.0
[3941001.406] drmOpenDevice: node name is /dev/dri/card0
[3941001.406] drmOpenDevice: open result is 9, (OK)
[3941001.406] drmOpenByBusid: drmOpenMinor returns 9
[3941001.406] drmOpenByBusid: drmGetBusid reports pci:0000:05:00.0
[3941001.406] (II) [drm] DRM interface version 1.4
[3941001.406] (II) [drm] DRM open master succeeded.
[3941001.406] (-) NOUVEAU(0): Chipset: “NVIDIA NVc8″
[3941001.406] (II) NOUVEAU(0): Creating default Display subsection in Screen section
“Default Screen Section” for depth/fbbpp 24/32
[3941001.406] (==) NOUVEAU(0): Depth 24, (-) framebuffer bpp 32
[3941001.406] (==) NOUVEAU(0): RGB weight 888
[3941001.406] (==) NOUVEAU(0): Default visual is TrueColor
[3941001.406] (==) NOUVEAU(0): Using HW cursor
[3941001.406] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[3941001.406] (==) NOUVEAU(0): Page flipping enabled
[3941001.498] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[3941001.588] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[3941001.624] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[3941001.634] (II) NOUVEAU(0): Output DP-1 has no monitor section
[3941001.724] (II) NOUVEAU(0): EDID for output DVI-I-1
[3941001.814] (II) NOUVEAU(0): EDID for output DVI-I-2
[3941001.850] (II) NOUVEAU(0): EDID for output HDMI-1
[3941001.850] (II) NOUVEAU(0): Manufacturer: MED Model: 3608 Serial#: 16843009
[3941001.850] (II) NOUVEAU(0): Year: 2009 Week: 0
[3941001.850] (II) NOUVEAU(0): EDID Version: 1.3
[3941001.850] (II) NOUVEAU(0): Digital Display Input
[3941001.850] (II) NOUVEAU(0): DFP 1.x compatible TMDS
[3941001.850] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 30
[3941001.850] (II) NOUVEAU(0): Gamma: 2.20
[3941001.850] (II) NOUVEAU(0): DPMS capabilities: Off
[3941001.850] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[3941001.850] (II) NOUVEAU(0): First detailed timing is preferred mode
[3941001.850] (II) NOUVEAU(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
[3941001.850] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.071 whiteX: 0.313 whiteY: 0.329
[3941001.850] (II) NOUVEAU(0): Supported established timings:
[3941001.850] (II) NOUVEAU(0): 720×400@70Hz
[3941001.850] (II) NOUVEAU(0): 640×480@60Hz
[3941001.850] (II) NOUVEAU(0): 640×480@67Hz
[3941001.850] (II) NOUVEAU(0): 640×480@72Hz
[3941001.850] (II) NOUVEAU(0): 640×480@75Hz
[3941001.850] (II) NOUVEAU(0): 800×600@56Hz
[3941001.850] (II) NOUVEAU(0): 800×600@60Hz
[3941001.850] (II) NOUVEAU(0): 800×600@72Hz
[3941001.850] (II) NOUVEAU(0): 800×600@75Hz
[3941001.850] (II) NOUVEAU(0): 832×624@75Hz
[3941001.850] (II) NOUVEAU(0): 1024×768@60Hz
[3941001.850] (II) NOUVEAU(0): 1024×768@70Hz
[3941001.850] (II) NOUVEAU(0): 1024×768@75Hz
[3941001.850] (II) NOUVEAU(0): 1280×1024@75Hz
[3941001.850] (II) NOUVEAU(0): 1152×864@75Hz
[3941001.850] (II) NOUVEAU(0): Manufacturer’s mask: 0
[3941001.850] (II) NOUVEAU(0): Supported standard timings:
[3941001.850] (II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[3941001.850] (II) NOUVEAU(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[3941001.850] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[3941001.850] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[3941001.850] (II) NOUVEAU(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[3941001.850] (II) NOUVEAU(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[3941001.850] (II) NOUVEAU(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[3941001.850] (II) NOUVEAU(0): #7: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[3941001.850] (II) NOUVEAU(0): Supported detailed timing:
[3941001.850] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[3941001.850] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[3941001.850] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[3941001.850] (II) NOUVEAU(0): Serial No:
[3941001.850] (II) NOUVEAU(0): Ranges: V min: 55 V max: 76 Hz, H min: 29 H max: 81 kHz, PixClock max 175 MHz
[3941001.850] (II) NOUVEAU(0): Monitor name: MD 20120
[3941001.850] (II) NOUVEAU(0): Supported detailed timing:
[3941001.850] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[3941001.850] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[3941001.850] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[3941001.850] (II) NOUVEAU(0): Supported detailed timing:
[3941001.850] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[3941001.850] (II) NOUVEAU(0): h_active: 1920 h_sync: 1936 h_sync_end 1980 h_blank_end 2640 h_border: 0
[3941001.850] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[3941001.850] (II) NOUVEAU(0): Supported detailed timing:
[3941001.850] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[3941001.850] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[3941001.850] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[3941001.850] (II) NOUVEAU(0): Supported detailed timing:
[3941001.850] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[3941001.850] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[3941001.850] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[3941001.850] (II) NOUVEAU(0): Supported detailed timing:
[3941001.850] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[3941001.850] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[3941001.850] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[3941001.850] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[3941001.850] (II) NOUVEAU(0): EDID (in hex):
[3941001.850] (II) NOUVEAU(0): 00ffffffffffff0034a4083601010101
[3941001.850] (II) NOUVEAU(0): 0013010381341e782aeed5a555489b26
[3941001.850] (II) NOUVEAU(0): 125054bfef80b300a940950081408180
[3941001.850] (II) NOUVEAU(0): 950f714f9040023a801871382d40582c
[3941001.850] (II) NOUVEAU(0): 450009252100001e000000ff000a2020
[3941001.850] (II) NOUVEAU(0): 20202020202020202020000000fd0037
[3941001.850] (II) NOUVEAU(0): 4c1d5111000a202020202020000000fc
[3941001.850] (II) NOUVEAU(0): 004d442032303132300a2020202001f0
[3941001.850] (II) NOUVEAU(0): Printing probed modes for output HDMI-1
[3941001.850] (II) NOUVEAU(0): Modeline “1920×1080″x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1920×1080″x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1920×1080″x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1920×1080″x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1920x1080i”x50.0 74.25 1920 1936 1980 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1600×1200″x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1680×1050″x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1400×1050″x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1280×1024″x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1280×1024″x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1440×900″x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1440×900″x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1280×960″x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1152×864″x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1280×720″x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1280×720″x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1440×576″x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1024×768″x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1024×768″x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1024×768″x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “1440×480″x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “832×624″x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “800×600″x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “800×600″x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “800×600″x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “800×600″x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “720×576″x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “720×480″x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “640×480″x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “640×480″x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “640×480″x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “640×480″x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “640×480″x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[3941001.850] (II) NOUVEAU(0): Modeline “720×400″x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[3941001.861] (II) NOUVEAU(0): EDID for output DP-1
[3941001.861] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[3941001.861] (II) NOUVEAU(0): Output DVI-I-2 disconnected
[3941001.861] (II) NOUVEAU(0): Output HDMI-1 connected
[3941001.861] (II) NOUVEAU(0): Output DP-1 disconnected
[3941001.861] (II) NOUVEAU(0): Using exact sizes for initial modes
[3941001.861] (II) NOUVEAU(0): Output HDMI-1 using initial mode 1920×1080
[3941001.861] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[3941001.861] (-) NOUVEAU(0): Virtual size is 1920×1080 (pitch 0)
[3941001.861] (**) NOUVEAU(0): Driver mode “1920×1080″: 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1920×1080″x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1920×1080″: 148.5 MHz (scaled from 0.0 MHz), 56.2 kHz, 50.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1920×1080″x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1920×1080″: 74.2 MHz (scaled from 0.0 MHz), 33.8 kHz, 60.0 Hz (I)
[3941001.861] (II) NOUVEAU(0): Modeline “1920×1080″x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1920×1080″: 74.2 MHz (scaled from 0.0 MHz), 28.1 kHz, 50.0 Hz (I)
[3941001.861] (II) NOUVEAU(0): Modeline “1920×1080″x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1920x1080i”: 74.2 MHz (scaled from 0.0 MHz), 28.1 kHz, 50.0 Hz (I)
[3941001.861] (II) NOUVEAU(0): Modeline “1920x1080i”x50.0 74.25 1920 1936 1980 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1600×1200″: 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1600×1200″x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1680×1050″: 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1680×1050″x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1400×1050″: 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1400×1050″x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1280×1024″: 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1280×1024″x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1280×1024″: 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1280×1024″x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1440×900″: 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1440×900″x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1440×900″: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1440×900″x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1280×960″: 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1280×960″x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1152×864″: 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1152×864″x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1280×720″: 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1280×720″x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1280×720″: 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1280×720″x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1440×576″: 27.0 MHz (scaled from 0.0 MHz), 15.6 kHz, 50.0 Hz (I)
[3941001.861] (II) NOUVEAU(0): Modeline “1440×576″x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1024×768″: 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1024×768″x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1024×768″: 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1024×768″x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1024×768″: 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “1024×768″x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “1440×480″: 27.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 59.9 Hz (I)
[3941001.861] (II) NOUVEAU(0): Modeline “1440×480″x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “832×624″: 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “832×624″x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “800×600″: 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “800×600″x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “800×600″: 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “800×600″x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “800×600″: 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “800×600″x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “800×600″: 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “800×600″x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “720×576″: 27.0 MHz (scaled from 0.0 MHz), 31.2 kHz, 50.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “720×576″x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “720×480″: 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “720×480″x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “640×480″: 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “640×480″x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “640×480″: 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “640×480″x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “640×480″: 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “640×480″x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “640×480″: 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “640×480″x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “640×480″: 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “640×480″x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[3941001.861] (**) NOUVEAU(0): Driver mode “720×400″: 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[3941001.861] (II) NOUVEAU(0): Modeline “720×400″x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[3941001.861] (==) NOUVEAU(0): DPI set to (96, 96)
[3941001.861] (II) Loading sub module “fb”
[3941001.861] (II) LoadModule: “fb”
[3941001.861] (II) Loading /usr/lib/xorg/modules/libfb.so
[3941001.862] (II) Module fb: vendor=”X.Org Foundation”
[3941001.862] compiled for 1.11.3, module version = 1.0.0
[3941001.862] ABI class: X.Org ANSI C Emulation, version 0.4
[3941001.862] (II) Loading sub module “exa”
[3941001.862] (II) LoadModule: “exa”
[3941001.862] (II) Loading /usr/lib/xorg/modules/libexa.so
[3941001.862] (II) Module exa: vendor=”X.Org Foundation”
[3941001.862] compiled for 1.11.3, module version = 2.5.0
[3941001.862] ABI class: X.Org Video Driver, version 11.0
[3941001.862] (II) Loading sub module “shadowfb”
[3941001.862] (II) LoadModule: “shadowfb”
[3941001.869] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[3941001.869] (II) Module shadowfb: vendor=”X.Org Foundation”
[3941001.869] compiled for 1.11.3, module version = 1.0.0
[3941001.869] ABI class: X.Org ANSI C Emulation, version 0.4
[3941001.869] (II) UnloadModule: “nv”
[3941001.869] (II) Unloading nv
[3941001.869] (II) UnloadModule: “vesa”
[3941001.869] (II) Unloading vesa
[3941001.869] (II) UnloadModule: “fbdev”
[3941001.869] (II) Unloading fbdev
[3941001.869] (II) UnloadModule: “fbdevhw”
[3941001.869] (II) Unloading fbdevhw
[3941001.869] (-) Depth 24 pixmap format is 32 bpp
[3941001.875] (II) NOUVEAU(0): Opened GPU channel 1
[3941001.875] (II) NOUVEAU(0): [DRI2] Setup complete
[3941001.875] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[3941001.875] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[3941001.875] (II) NOUVEAU(0): GART: 511MiB available
[3941001.880] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[3941001.881] (II) EXA(0): Driver allocated offscreen pixmaps
[3941001.881] (II) EXA(0): Driver registered support for the following operations:
[3941001.881] (II) Solid
[3941001.881] (II) Copy
[3941001.881] (II) Composite (RENDER acceleration)
[3941001.881] (II) UploadToScreen
[3941001.881] (II) DownloadFromScreen
[3941001.881] (==) NOUVEAU(0): Backing store disabled
[3941001.881] (==) NOUVEAU(0): Silken mouse enabled
[3941001.881] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[3941001.881] (II) NOUVEAU(0): [XvMC] Extension initialized.
[3941001.881] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[3941001.881] (-) RandR disabled
[3941001.881] (II) Initializing built-in extension Generic Event Extension
[3941001.881] (II) Initializing built-in extension SHAPE
[3941001.881] (II) Initializing built-in extension MIT-SHM
[3941001.881] (II) Initializing built-in extension XInputExtension
[3941001.881] (II) Initializing built-in extension XTEST
[3941001.881] (II) Initializing built-in extension BIG-REQUESTS
[3941001.881] (II) Initializing built-in extension SYNC
[3941001.881] (II) Initializing built-in extension XKEYBOARD
[3941001.881] (II) Initializing built-in extension XC-MISC
[3941001.881] (II) Initializing built-in extension SECURITY
[3941001.881] (II) Initializing built-in extension XINERAMA
[3941001.881] (II) Initializing built-in extension XFIXES
[3941001.881] (II) Initializing built-in extension RENDER
[3941001.881] (II) Initializing built-in extension RANDR
[3941001.881] (II) Initializing built-in extension COMPOSITE
[3941001.881] (II) Initializing built-in extension DAMAGE
[3941001.897] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[3941001.907] (II) NOUVEAU(0): NVEnterVT is called.
[3941001.925] (II) NOUVEAU(0): Setting screen physical size to 507 x 285
[3941001.925] resize called 1920 1080
[3941001.997] (II) XKB: reuse xkmfile /var/cache/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[3941001.999] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[3941001.999] (**) Power Button: Applying InputClass “evdev keyboard catchall”
[3941001.999] (**) Power Button: Applying InputClass “evdev keyboard catchall”
[3941001.999] (II) LoadModule: “evdev”
[3941001.999] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[3941002.030] (II) Module evdev: vendor=”X.Org Foundation”
[3941002.030] compiled for 1.11.3, module version = 2.6.0
[3941002.030] Module class: X.Org XInput Driver
[3941002.030] ABI class: X.Org XInput driver, version 16.0
[3941002.030] (II) Using input driver ‘evdev’ for ‘Power Button’
[3941002.030] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[3941002.030] (**) Power Button: always reports core events
[3941002.030] (**) Power Button: Device: “/dev/input/event1″
[3941002.030] (-) Power Button: Found keys
[3941002.030] (II) Power Button: Configuring as keyboard
[3941002.030] (**) Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1″
[3941002.030] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
[3941002.030] (**) Option “xkb_rules” “evdev”
[3941002.030] (**) Option “xkb_model” “pc105″
[3941002.030] (**) Option “xkb_layout” “us”
[3941002.030] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[3941002.030] (**) Power Button: Applying InputClass “evdev keyboard catchall”
[3941002.030] (**) Power Button: Applying InputClass “evdev keyboard catchall”
[3941002.030] (II) Using input driver ‘evdev’ for ‘Power Button’
[3941002.030] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[3941002.030] (**) Power Button: always reports core events
[3941002.030] (**) Power Button: Device: “/dev/input/event0″
[3941002.030] (-) Power Button: Found keys
[3941002.030] (II) Power Button: Configuring as keyboard
[3941002.030] (**) Option “config_info” “udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0″
[3941002.030] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 7)
[3941002.030] (**) Option “xkb_rules” “evdev”
[3941002.030] (**) Option “xkb_model” “pc105″
[3941002.030] (**) Option “xkb_layout” “us”
[3941002.031] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event5)
[3941002.031] (II) No input driver specified, ignoring this device.
[3941002.031] (II) This device may have been added with another device file.
[3941002.031] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event6)
[3941002.031] (II) No input driver specified, ignoring this device.
[3941002.031] (II) This device may have been added with another device file.
[3941002.031] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[3941002.031] (II) No input driver specified, ignoring this device.
[3941002.031] (II) This device may have been added with another device file.
[3941002.031] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[3941002.031] (II) No input driver specified, ignoring this device.
[3941002.031] (II) This device may have been added with another device file.
[3941002.031] (II) config/udev: Adding input device Cherry GmbH wired keyboard (/dev/input/event2)
[3941002.031] (**) Cherry GmbH wired keyboard: Applying InputClass “evdev keyboard catchall”
[3941002.031] (**) Cherry GmbH wired keyboard: Applying InputClass “evdev keyboard catchall”
[3941002.031] (II) Using input driver ‘evdev’ for ‘Cherry GmbH wired keyboard’
[3941002.031] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[3941002.031] (**) Cherry GmbH wired keyboard: always reports core events
[3941002.031] (**) Cherry GmbH wired keyboard: Device: “/dev/input/event2″
[3941002.031] (-) Cherry GmbH wired keyboard: Found keys
[3941002.031] (II) Cherry GmbH wired keyboard: Configuring as keyboard
[3941002.031] (**) Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input2/event2″
[3941002.031] (II) XINPUT: Adding extended input device “Cherry GmbH wired keyboard” (type: KEYBOARD, id
[3941002.031] (**) Option “xkb_rules” “evdev”
[3941002.031] (**) Option “xkb_model” “pc105″
[3941002.031] (**) Option “xkb_layout” “us”
[3941002.032] (II) config/udev: Adding input device Cherry GmbH wired keyboard (/dev/input/event3)
[3941002.032] (**) Cherry GmbH wired keyboard: Applying InputClass “evdev keyboard catchall”
[3941002.032] (**) Cherry GmbH wired keyboard: Applying InputClass “evdev keyboard catchall”
[3941002.032] (II) Using input driver ‘evdev’ for ‘Cherry GmbH wired keyboard’
[3941002.032] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[3941002.032] (**) Cherry GmbH wired keyboard: always reports core events
[3941002.032] (**) Cherry GmbH wired keyboard: Device: “/dev/input/event3″
[3941002.032] (-) Cherry GmbH wired keyboard: Found keys
[3941002.032] (II) Cherry GmbH wired keyboard: Configuring as keyboard
[3941002.032] (**) Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input3/event3″
[3941002.032] (II) XINPUT: Adding extended input device “Cherry GmbH wired keyboard” (type: KEYBOARD, id 9)
[3941002.032] (**) Option “xkb_rules” “evdev”
[3941002.032] (**) Option “xkb_model” “pc105″
[3941002.032] (**) Option “xkb_layout” “us”
[3941002.032] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event4)
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass “evdev pointer catchall”
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass “evdev pointer catchall”
[3941002.032] (II) Using input driver ‘evdev’ for ‘Logitech USB-PS/2 Optical Mouse’
[3941002.032] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: Device: “/dev/input/event4″
[3941002.032] (-) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[3941002.032] (-) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[3941002.032] (-) Logitech USB-PS/2 Optical Mouse: Found relative axes
[3941002.032] (-) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[3941002.032] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[3941002.032] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[3941002.032] (**) Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input4/event4″
[3941002.032] (II) XINPUT: Adding extended input device “Logitech USB-PS/2 Optical Mouse” (type: MOUSE, id 10)
[3941002.032] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[3941002.032] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[3941002.032] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[3941002.032] (II) No input driver specified, ignoring this device.
[3941002.032] (II) This device may have been added with another device file.
[3941037.814] (II) NOUVEAU(0): NVLeaveVT is called.

April 25, 2012 at 14:16 #3635

tomlohave

mixed libs …
and there is problem with nvidia proprietary drivers

wat returns command line :
modprobe nvidia
?
April 26, 2012 at 01:11 #3640

tomlohave

Can you remove your xf86-video-drivers and install this one :
ie :

opkg remove xf86-video-nvidia
opk install http://download.openbricks.org/r14192/test/xf86-video-nvidia_295.40-1_i686.opk
reboot
April 27, 2012 at 02:20 #3647

tomlohave

try http://download.openbricks.org/r14216/
i’ve tested nvidia and it works
April 27, 2012 at 03:24 #3648

jesters_ice

Will test this and report back asap this evening, thank you.
Viewing 15 posts – 1 through 15 (of 22 total)
1 2

You must be logged in to reply to this topic.