S/PDIF output not working

[oskarn97Member]

S/PDIF output is not working on my cubox-i4 pro, there is only a noise.

My log from splay -l:

card 0: imxspdif [imx-spdif], device 0: IMX SPDIF mxc-spdif-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: imxhdmisoc [imx-hdmi-soc], device 0: IMX HDMI TX mxc-hdmi-soc-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0

My /etc/audio

# Soundcard Configuration File

# Soundcard to use by name (e.g. “SB”) or by ID (0 for first card, 1 for second, …)
ALSA_CARD=”0″

# Output mode ( analog/digital/hdmi )
# digital is used for SPDIF/IEC958 output
SOUNDCARD_MODE=”digital”

# passthrough mode for digital/hdmi outputs (none, ac3, dts or ac3dts)
# (Note: in analog mode this option is ignored)
# none : software audio decoding for all streams
# ac3 : enable hardware passthrough for AC-3 streams only
# dts : enable hardware passthrough for DTS streams only
# ac3dts : enable hardware passthrough for both AC-3 and DTS streams
SOUNDCARD_PT_MODE=”ac3dts”

# IEC958 Playback AC97-SPSA Mode:
# 0. PCM1
# 1. PCM2,PCM1 (rear)
# 2. Centre and LFE
# 3. PCM3,Modem,Dedicated S/PDIF
# For SPDIF most users will want 0, but some users may need 3.
AC97_SPSA=”0″

# Playback channels
# 2 – Stereo
# 4 – Surround
# 6 – Full 5.1
# note: in SPDIF and hardware AC3 decoder mode this option is ignored.
CHANNELS=”6″

# SB Live/Audigy Analog/Digital Output Mode:
# 0: Suitable for some older SB Live! cards
# 1: Suitable for newer SB Live! and all Audigy cards
SBL_AUDIGY=”1″

# Debug mode
# 0: Don’t write log file
# 1: Write log file to /tmp
MIXER_DEBUG=”0″

[tomlohaveKeymaster]

did you try to activate spdif on xbmc ?

[Author]

Posts