GeeXboX

[Cubox-i] ethotool

April 19th, 2016

Home › Forums › GeeXboX on ARM SoCs › [Cubox-i] ethotool

Tagged: ,

This topic contains 1 reply, has 2 voices, and was last updated by tomlohave 2 days, 15 hours ago.

Viewing 2 posts – 1 through 2 (of 2 total)
  • Author
    Posts
  • April 19, 2016 at 19:13 #10445

    togath
    Member

    Hi guys,

    afer I getting a new SD card for cubox – I need to reinstall everything. Previously I had the eth limitation to 100mbit configured during startup.

    But I cannot remember how I managed to configure it. And I cannot find a howto on geexbox.

    > ethtool -s eth0 speed 100 duplex full

    But where to put this command?

    Thanks in advance,
    togath

    April 20, 2016 at 18:13 #10446

    tomlohave
    Moderator

    Hello,
    maybe you can have a look here :
    http://www.geexbox.org/forum/topic/enable-wake-on-lan/

    Cheers !

  • Author
    Posts
Viewing 2 posts – 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Comments are closed.