Recently my Geexbox (XBMC 13.1) running on my Cubox-i4 pro is stuck on a bootloop. The device seems to boot just as it would normally, then at some point the led blinks 8 times after which it reboots.
I recently also moved, which is why I had to reconnect everything. The device was not damaged in any way so I do not expect this to be the reason this is happening.
I read the serial console using this guide:
CuBox-i U-Boot > boot
[21C
mmc0 is current device
[22C
** Unable to read file /boot.scr **
[35C
171 bytes read in 7 ms (23.4 KiB/s)
[35C
Importing environment from mmc0 ...
[35C
4847136 bytes read in 295 ms (15.7 MiB/s)
[41C
Booting from mmc ...
[20C
43845 bytes read in 16 ms (2.6 MiB/s)
[37C
Booting zImage
[14C
Kernel image @ 0x10800000 [ 0x000000 - 0x49f620 ]
[49C
## Flattened Device Tree blob at 18000000
[41C
Booting using the fdt blob at 0x18000000
[43C
Using Device Tree in place at 18000000, end 1800db44
[55C
Starting kernel ...
[19C
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.30 (geexbox@SolidRun-PC) (gcc version 4.8.3 20140401 (prerelease) (Linaro GCC 4.8-2014.04) ) #1 SMP Thu Jun 26 17:43:42 IDT 2014
CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: SolidRun Cubox-i Dual/Quad
Truncating RAM at 10000000-8fffffff to -7f7fffff (vmalloc region overlap).
cma: CMA: reserved 256 MiB at 6e000000
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 8 pages/cpu @81703000 s8512 r8192 d16064 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 453136
Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw consoleblank=0 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=16 dmfc=3
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
allocated 3653632 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 1784MB = 1784MB total
Memory: 1535288k/1535288k available, 291528k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0x80000000 - 0xef800000 (1784 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x807f4cf4 (8116 kB)
.init : 0x807f5000 - 0x80833140 ( 249 kB)
.data : 0x80834000 - 0x80885700 ( 326 kB)
.bss : 0x80885700 - 0x808eafb8 ( 407 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
[8CRCU debugfs-based tracing is enabled.
[8CAdditional per-CPU info printed with stalls.
NR_IRQS:16 nr_irqs:16 16
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x72070000, Cache size: 1048576 B
sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
CPU identified as i.MX6Q, silicon rev 1.5
Console: colour dummy device 80x30
Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x805d0c68 - 0x805d0cc0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (6324.22 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Use WDOG1 as reset source
syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
vdd1p1: 800 <--> 1375 mV at 1125 mV
vdd3p0: 2800 <--> 3150 mV at 3000 mV
vdd2p5: 2000 <--> 2750 mV at 2425 mV
cpu: 725 <--> 1450 mV at 1150 mV
vddpu: 725 <--> 1450 mV at 1150 mV
vddsoc: 725 <--> 1450 mV at 1200 mV
syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
bio: create slab at 0
mxs-dma 110000.dma-apbh: initialized
brcm_osc_reg: 3300 mV
brcm_reg: 3300 mV
3P3V: 3300 mV
usb_h1_vbus: 5000 mV
usb_otg_vbus: 5000 mV
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c i2c-2: IMX I2C adapter registered
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
imx-ipuv3 2400000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)
imx-ipuv3 2800000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)
MIPI CSI2 driver module loaded
Advanced Linux Sound Architecture Driver Initialized.
Switching to clocksource mxc_timer1
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with ARMv7_Cortex_A9 PMU driver, 7 counters available
pureg-dummy: no parameters
imx6_busfreq busfreq.13: DDR medium rate not supported.
Bus freq driver module loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.22)
msgmni has been set to 3510
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
imx-weim 21b8000.weim: WEIM driver registered.
mxc_sdc_fb mxc_sdc_fb.28: register mxc display driver hdmi
mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
fbcvt: 1920x1080@60: CVT Name - 2.073M9
Console: switching to colour frame buffer device 240x67
imx-sdma 20ec000.sdma: loaded firmware 1.1
imx-sdma 20ec000.sdma: initialized
Serial: IMX driver
2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
console [ttymxc0] enabled
mxc_hdmi 20e0000.hdmi_video: mxc_edid_read_internal
21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized vivante 1.0.0 20120216 on minor 0
brd: module loaded
loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci ahci: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
ahci ahci: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
fbcvt: 1920x1080@60: CVT Name - 2.073M9
scsi0 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
CAN device driver interface
libphy: fec_enet_mii_bus: probed
fec 2188000.ethernet eth0: registered PHC device 0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
imx_usb 2184000.usb: usbmisc init failed, ret=-517
platform 2184000.usb: Driver imx_usb requests probe deferral
imx_usb 2184200.usb: usbmisc init failed, ret=-517
platform 2184200.usb: Driver imx_usb requests probe deferral
mousedev: PS/2 mouse device common for all mice
i2c-core: driver [isl29023] using legacy suspend method
i2c-core: driver [isl29023] using legacy resume method
rtc-pcf8523 2-0068: rtc core: registered rtc-pcf8523 as rtc0
snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc1
i2c /dev entries driver
Registered IR keymap rc-empty
input: gpio_ir_recv as /devices/soc0/ir-receiver.22/rc/rc0/input0
rc0: gpio_ir_recv as /devices/soc0/ir-receiver.22/rc/rc0
mxc_v4l2_output v4l2_out.31: V4L2 device registered as video16
mxc_v4l2_output v4l2_out.31: V4L2 device registered as video17
imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
mmc0: no vqmmc regulator found
sdhci-esdhc-imx 2190000.usdhc: lookup for GPIO card-reset failed
mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
mmc1: no vqmmc regulator found
ata1: SATA link down (SStatus 0 SControl 300)
ahci ahci: no device found, disabling link.
ahci ahci: pass ahci_imx..hotplug=1 to enable hotplug
mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
mmc0: new high speed SDIO card at address 0001
mmc1: host does not support reading read-only switch. assuming write-enable.
mmc1: new high speed SDHC card at address aaaa
mmcblk0: mmc1:aaaa SU04G 3.69 GiB
mmcblk0: p1 p2
Galcore version 4.6.9.9754
mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
mxc_asrc 2034000.asrc: mxc_asrc registered
mxc_vpu 2040000.vpu: VPU initialized
mxc_hdmi_cec hdmi_cec.15: HDMI CEC initialized
caam 2100000.caam: device ID = 0x0a16010000000000 (Era -524)
caam 2100000.caam: job rings = 2, qi = 0
caam 2100000.caam: authenc-hmac-md5-cbc-aes-caam
caam 2100000.caam: authencesn-hmac-md5-cbc-aes-caam
caam 2100000.caam: authenc-hmac-sha1-cbc-aes-caam
caam 2100000.caam: authencesn-hmac-sha1-cbc-aes-caam
caam 2100000.caam: authenc-hmac-sha224-cbc-aes-caam
caam 2100000.caam: authencesn-hmac-sha224-cbc-aes-caam
caam 2100000.caam: authenc-hmac-sha256-cbc-aes-caam
caam 2100000.caam: authencesn-hmac-sha256-cbc-aes-caam
caam 2100000.caam: authenc-hmac-md5-cbc-des3_ede-caam
caam 2100000.caam: authencesn-hmac-md5-cbc-des3_ede-caam
caam 2100000.caam: authenc-hmac-sha1-cbc-des3_ede-caam
caam 2100000.caam: authencesn-hmac-sha1-cbc-des3_ede-caam
caam 2100000.caam: authenc-hmac-sha224-cbc-des3_ede-caam
caam 2100000.caam: authencesn-hmac-sha224-cbc-des3_ede-caam
caam 2100000.caam: authenc-hmac-sha256-cbc-des3_ede-caam
caam 2100000.caam: authencesn-hmac-sha256-cbc-des3_ede-caam
caam 2100000.caam: authenc-hmac-md5-cbc-des-caam
caam 2100000.caam: authencesn-hmac-md5-cbc-des-caam
caam 2100000.caam: authenc-hmac-sha1-cbc-des-caam
caam 2100000.caam: authencesn-hmac-sha1-cbc-des-caam
caam 2100000.caam: authenc-hmac-sha224-cbc-des-caam
caam 2100000.caam: authencesn-hmac-sha224-cbc-des-caam
caam 2100000.caam: authenc-hmac-sha256-cbc-des-caam
caam 2100000.caam: authencesn-hmac-sha256-cbc-des-caam
caam 2100000.caam: ecb-des-caam
caam 2100000.caam: ecb-arc4-caam
caam 2100000.caam: ecb-aes-caam
caam 2100000.caam: ctr-aes-caam
caam 2100000.caam: cbc-aes-caam
caam 2100000.caam: ecb-des3-caam
caam 2100000.caam: cbc-3des-caam
caam 2100000.caam: cbc-des-caam
caam 2100000.caam: fsl,sec-v4.0 algorithms registered in /proc/crypto
platform 2101000.jr0: registering rng-caam
platform caam_sm: caam_sm_test: 8-byte key test match OK
platform caam_sm: caam_sm_test: 16-byte key test match OK
platform caam_sm: caam_sm_test: 32-byte key test match OK
platform caam_secvio.32: security violation service handlers armed
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver r8712u
imx-spdif sound-spdif.26: dit-hifi <-> 2004000.spdif mapping ok
imx-audio-hdmi sound-hdmi.27: hdmi-hifi <-> hdmi_audio.14 mapping ok
TCP: cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
registered taskstats version 1
ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ci_hdrc ci_hdrc.1: doesn't support gadget
ci_hdrc ci_hdrc.1: EHCI Host Controller
ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
rtc-pcf8523 2-0068: setting system clock to 2006-02-04 01:20:21 UTC (1139016021)
ALSA device list:
#0: imx-spdif
#1: imx-hdmi-soc
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 248K (807f5000 - 80833000)
Welcome to [1m[33mGeeXboX devel-20140626-r894b43a[0m!
systemd[1]: Failed to insert module 'ipv6'
Expecting device dev-ttymxc0.device...
[[32m OK [39m] Reached target Remote File Systems.
[[32m OK [39m] Reached target Paths.
[[32m OK [39m] Reached target Swap.
[[32m OK [39m] Created slice Root Slice.
[[32m OK [39m] Listening on Delayed Shutdown Socket.
[[32m OK [39m] Listening on /dev/initctl Compatibility Named Pipe.
[[32m OK [39m] Listening on udev Kernel Socket.
[[32m OK [39m] Listening on udev Control Socket.
[[32m OK [39m] Listening on Journal Socket.
[[32m OK [39m] Created slice System Slice.
Mounting Debug File System...
Starting udev Coldplug all Devices...
Starting Create list of required static device nodes...rrent kernel...
Starting Load Kernel Modules...
[[32m OK [39m] Created slice system-getty.slice.
[[32m OK [39m] Created slice system-serialx2dgetty.slice.
Starting Journal Service...
IR RC5(x) protocol handler initialized
[[32m OK [39m] Started Journal Service.
IR RC6 protocol handler initialized
[[32m OK [39mIR JVC protocol handler initialized
] Reached target Slices.
IR NEC protocol handler initialized
IR Sony protocol handler initialized
input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input1
IR MCE Keyboard/mouse protocol handler initialized
IR SANYO protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 245
rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
IR LIRC bridge handler initialized
Mounting Temporary Directory...
Starting Remount Root and Kernel File Systems...
[[32m OK [39m] Mounted Debug File System.
[[32m OK [39m] Mounted Temporary Directory.
[[32m OK [39m] Started Create list of required static device nodes ...current kernel.
[[32m OK [39m] Started Load Kernel Modules.
[[32m OK [39m] Started Remount Root and Kernel File Systems.
[[32m OK [39m] Started udev Coldplug all Devices.
Starting Load/Save Random Seed...
Starting Create static device nodes in /dev...
Mounting FUSE Control File System...
[[32m OK [39m] Started Load/Save Random Seed.
[[32m OK [39m] Started Create static device nodes in /dev.
[[32m OK [39m] Mounted FUSE Control File System.
Starting udev Kernel Device Manager...
[[32m OK [39m] Reached target Local File Systems (Pre).
[[32m OK [39m] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
systemd-udevd[166]: starting version 210
Starting Trigger Flushing of Journal to Persistent Storage...
[[32m OK [39m] Started udev Kernel Device Manager.
[[32m OK [39m] Started Create Volatile Files and Directories.
[[32m OK [39m] Reached target System Initialization.
[[32m OK [39m] Listening on SSH socket.
[[32m OK [39m] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[[32m OK [39m] Listening on D-Bus System Message Bus Socket.
[[32m OK [39m] Reached target Timers.
[[32m OK [39m] Listening on telnetd.socket.
[[32m OK [39m] Found device /dev/ttymxc0.
systemd-journald[149]: Received request to flush runtime journal from PID 1
[[32m OK [39m] Started Trigger Flushing of Journal to Persistent Storage.
cfg80211: Calling CRDA to update world regulatory domain
[[32m OK [39m] Reached target Sound Card.
[[32m OK [39m] Reached target Sockets.
[[32m OK [39m] Reached target Basic System.
Starting Getty on tty1...
[[32m OK [39m] Started Getty on tty1.
Starting Getty on tty3...
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
[[32m OK [39m] Started Getty on tty3.
Starting Getty on tty2...
[[32m OK [39m] Started Getty on tty2.
Starting Serial Getty on ttymxc0...
[[32m OK [39m] Started Serial Getty on ttymxc0.
[[32m OK [39m] Reached target Login Prompts.
Starting Resize and enlarge sdcard...
Starting Cubox led...
Starting Wi-Fi Security Service...
brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 25 2011 19:34:12 version 5.90.125.104
Starting Synchronize System Clock With RTC...
brcmfmac: brcmf_fil_cmd_data: Failed err=-23
Starting Eventlircd daemon...
brcmfmac: brcmf_fil_cmd_data: Failed err=-23
brcmfmac: brcmf_fil_cmd_data: Failed err=-23
Starting rtorrent daemon...
brcmfmac: brcmf_fil_cmd_data: Failed err=-23
[[32m OK [39m] Started rtorrent daemon.
Starting Network backend...
Starting Cache PCI devices...
Starting Avahi mDNS/DNS-SD Stack...
Starting irqbalance...
[[32m OK [39m] Started irqbalance.
Starting Command Scheduler...
[[32m OK [39m] Started Command Scheduler.
Starting D-Bus System Message Bus...
[[32m OK [39m] Started D-Bus System Message Bus.
[[32m OK [39m] Started Avahi mDNS/DNS-SD Stack.
[[32m OK [39m] Started Wi-Fi Security Service.
Starting Network Service...
Starting pvr backend...
Starting ALSA mixer configuration...
Starting FTP Server...
[[32m OK [39m] Started FTP Server.
Starting nmbd Server...
[[32m OK [39m] Started nmbd Server.
Starting Samba Server...
[[32m OK [39m] Started Samba Server.
Starting Load Broadcom bluetooth firmware...
Starting Bluetooth service...
[[32m OK [39m] Started Network Service.
[[32m OK [39m] Started Resize and enlarge sdcard.
[[32m OK [39m] Started Cubox led.
[[32m OK [39m] Started Synchronize System Clock With RTC.
[[32m OK [39m] Started Cache PCI devices.
[[32m OK [39m] Started ALSA mixer configuration.
[[32m OK [39m] Started Eventlircd daemon.
[[32m OK [39m] Started Network backend.
[[32m OK [39m] Started pvr backend.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[[32m OK [39m] Started Bluetooth service.
[[32m OK [39m] Created slice system-systemdx2drfkill.slice.
Starting Load/Save RF Kill SwitcBluetooth: BNEP (Ethernet Emulation) ver 1.3
h Status of rfkill0...
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Starting Connection service...
[[32m OK [39m] Started Load/Save RF Kill Switch Status of rfkill0.
[[32m OK [39m] Started Connection service.
[[32m OK [39m] Reached target Network.
Starting Lighttpd Daemon...
fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: HCIATH3K protocol initialized
Bluetooth: HCI Three-wire UART (H5) protocol initialized
Starting Load/Save RF Kill Switch Status of rfkill1...
[[32m OK [39m] Reached target Bluetooth.
[[32m OK [39m] Started Lighttpd Daemon.
[[32m OK [39m] Started Load/Save RF Kill Switch Status of rfkill1.
[[32m OK [39m] Reached target Multi-User System.
[[32m OK [39m] Reached target Graphical Interface.
Starting XBMC Early Setup...
[[32m OK [39m] Started XBMC Early Setup.
Starting XBMC Media Center...
[[32m OK [39m] Started XBMC Media Center.
Starting wiiremote for xbmc...
Starting Silent messages...
[[32m OK [39m] Reached target XBMC Media Center.
libphy: 2188000.ethernet:00 - Link is Up - 100/Full
Welcome to GeeXboX arm devel-20140626-r894b43a (C) 2002-2014
geexbox login: Bluetooth: hci0 command 0x0401 tx timeout
U-Boot SPL 2013.10-rc4 (Jun 26 2014 - 22:48:17)
[47C
Boot Device: SD1
[16C
U-Boot 2013.10-rc4 (Jun 26 2014 - 22:48:17)
[43C
CPU: Freescale i.MX6Q rev1.5 at 792 MHz
[41C
Reset cause: POR
[16C
Board: MX6-CuBox-i
[18C
DRAM: 2 GiB
[12C
MMC: FSL_SDHC: 0
[18C
*** Warning - bad CRC, using default environment
[48C
In: serial
[13C
Out: vga
[10C
Err: vga
[10C
Net: FEC [PRIME]
[18C
(Re)start USB...
[16C
USB0: USB EHCI 1.00
[21C
scanning bus 0 for devices... 1 USB Device(s) found
[51C
scanning usb for storage devices... 0 Storage Device(s) found
[68C
scanning usb for ethernet devices... 0 Ethernet Device(s) found
[70C
Hit any key to stop autoboot: 3 0
From what i can see the cause of the reset is ‘POR’. I was unable to find anything useful about this on google any help on how to solve this would be greatly appreciated.
OMGDirkOMG 4 days, 15 hours ago.
