GeeXboX

ok, thanks. great distro btw

howto to create dmesg log

press “ctrl alt f2″
“root”
“root”
(optional: use “mount” to see where usb (/dev/sda1, or /dev/sdb1) is mounted)
“cd /.root”
(optional: use “ls” to list files. you should see some files, like casper-rw, EFI…)
“dmesg > dmesg.log”
“ls” to see if dmesg.log is there. you can see its contents with “nano dmesg.log”. “ctr x” to exit

“reboot”

my dmesg contents:

—————————————————————-

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38.8 (thomas@thomas-dv7) (gcc version 4.6.1 (GCC) ) #1 SMP Thu Dec 8 19:45:46 CET 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 – 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 – 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 – 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 – 000000000bff0000 (usable)
[ 0.000000] BIOS-e820: 000000000bff0000 – 000000000bffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000000bffffc0 – 000000000c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 – 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: TOSHIBA Satellite A60/Portable PC, BIOS Version 1.90 03/04/2005
[ 0.000000] e820 update range: 0000000000000000 – 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 – 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbff0 max_arch_pfn = 0×100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF8000000 write-back
[ 0.000000] 1 base 008000000 mask FFC000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0×7040600070406, new 0×7010600070106
[ 0.000000] initial memory mapped : 0 – 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000bff0000
[ 0.000000] 0000000000 – 0000400000 page 4k
[ 0.000000] 0000400000 – 000bc00000 page 2M
[ 0.000000] 000bc00000 – 000bff0000 page 4k
[ 0.000000] kernel direct mapping tables up to bff0000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 0bea1000 – 0bfef000
[ 0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00)
[ 0.000000] ACPI: RSDT 0bffb60f 00038 (v01 INSYDE RSDT_000 00000001 _CSI 00010101)
[ 0.000000] ACPI: FACP 0bfffa90 00074 (v01 INSYDE FACP_000 00000100 _CSI 00010101)
[ 0.000000] ACPI: DSDT 0bffb9b0 040D1 (v01 TOSINV Avani2 00001004 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0bffffc0 00040
[ 0.000000] ACPI: APIC 0bfffb20 00068 (v01 INSYDE APIC_000 30303030 0000 30303030)
[ 0.000000] ACPI: BOOT 0bfffb90 00028 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010101)
[ 0.000000] ACPI: SSDT 0bffb822 0017E (v01 PmRef Cpu0Cst 00003001 INTL 20030522)
[ 0.000000] ACPI: SSDT 0bffb647 001DB (v01 PmRef CpuPm 00003000 INTL 20030522)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 191MB LOWMEM available.
[ 0.000000] mapped low ram: 0 – 0bff0000
[ 0.000000] low ram: 0 – 0bff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0×00000010 -> 0×00001000
[ 0.000000] Normal 0×00001000 -> 0x0000bff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0×00000010 -> 0x0000009f
[ 0.000000] 0: 0×00000100 -> 0x0000bff0
[ 0.000000] On node 0 totalpages: 49023
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 352 pages used for memmap
[ 0.000000] Normal zone: 44688 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0×4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at c000000 (gap: c000000:f3f80000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @cb800000 s25152 r0 d24000 u2097152
[ 0.000000] pcpu-alloc: s25152 r0 d24000 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48639
[ 0.000000] Kernel command line: initrd=/initrd vga=789 persistent quiet splash loglevel=3 persistent BOOT_IMAGE=/vmlinuz
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 183336k/196544k available (5935k kernel code, 12756k reserved, 2752k data, 400k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 – 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 – 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xcc7f0000 – 0xff7fe000 ( 816 MB)
[ 0.000000] lowmem : 0xc0000000 – 0xcbff0000 ( 191 MB)
[ 0.000000] .init : 0xc187d000 – 0xc18e1000 ( 400 kB)
[ 0.000000] .data : 0xc15cbda9 – 0xc187c040 (2752 kB)
[ 0.000000] .text : 0xc1000000 – 0xc15cbda9 (5935 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=cb408000 soft=cb40a000
[ 0.000000] Console: colour dummy device 80×25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 983040 bytes of page_cgroup
[ 0.000000] please try ‘cgroup_disable=memory’ option if you don’t want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2799.803 MHz processor.
[ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.60 BogoMIPS (lpj=11199212)
[ 0.008019] pid_max: default: 32768 minimum: 301
[ 0.008125] Mount-cache hash table entries: 512
[ 0.008447] Initializing cgroup subsys ns
[ 0.008459] ns_cgroup deprecated: consider using the ‘clone_children’ flag without the ns_cgroup.
[ 0.008463] Initializing cgroup subsys cpuacct
[ 0.008471] Initializing cgroup subsys memory
[ 0.008489] Initializing cgroup subsys devices
[ 0.008493] Initializing cgroup subsys freezer
[ 0.008496] Initializing cgroup subsys blkio
[ 0.008571] CPU0: Hyper-Threading is disabled
[ 0.013021] SMP alternatives: switching to UP code
[ 0.022149] ACPI: Core revision 20110112
[ 0.022161] TOSHIBA Satellite detected – force copy of DSDT to local memory
[ 0.022339] ACPI: Forced DSDT copy: length 0x040D1 copied locally, original unmapped
[ 0.032105] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032341] ..TIMER: vector=0×30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.036002] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.036002] …trying to set up timer (IRQ0) through the 8259A …
[ 0.036002] ….. (found apic 0 pin 2) …
[ 0.075721] ……. works.
[ 0.075727] CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
[ 0.076004] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.076004] … version: 0
[ 0.076004] … bit width: 40
[ 0.076004] … generic registers: 18
[ 0.076004] … value mask: 000000ffffffffff
[ 0.076004] … max period: 0000007fffffffff
[ 0.076004] … fixed-purpose events: 0
[ 0.076004] … event mask: 000000000003ffff
[ 0.076004] Brought up 1 CPUs
[ 0.076004] Total of 1 processors activated (5599.60 BogoMIPS).
[ 0.076004] devtmpfs: initialized
[ 0.076004] print_constraints: dummy:
[ 0.076004] NET: Registered protocol family 16
[ 0.076004] ACPI: bus type pci registered
[ 0.076004] PCI: PCI BIOS revision 2.10 entry at 0xe9964, last bus=2
[ 0.076004] PCI: Using configuration type 1 for base access
[ 0.079197] bio: create slab at 0
[ 0.080550] ACPI: EC: Look up EC in DSDT
[ 0.099897] ACPI: Interpreter enabled
[ 0.099907] ACPI: (supports S0 S5)
[ 0.099933] ACPI: Using IOAPIC for interrupt routing
[ 0.113129] ACPI: Power Resource [PUT2] (on)
[ 0.114429] ACPI: Power Resource [PFA1] (off)
[ 0.114923] ACPI: EC: GPE = 0×7, I/O: command/status = 0×66, data = 0×62
[ 0.115092] ACPI: No dock devices found.
[ 0.115104] PCI: Ignoring host bridge windows from ACPI; if necessary, use “pci=use_crs” and report a bug
[ 0.115580] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.115974] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.116029] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.116035] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.116039] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
[ 0.116042] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
[ 0.116046] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
[ 0.116049] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.116052] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.116056] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.116059] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.116063] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.116066] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.116070] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
[ 0.116073] pci_root PNP0A03:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
[ 0.116077] pci_root PNP0A03:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
[ 0.116080] pci_root PNP0A03:00: host bridge window [mem 0x0c000000-0xfebfffff] (ignored)
[ 0.116084] pci_root PNP0A03:00: host bridge window [mem 0xfff80000-0xffffffff] (ignored)
[ 0.116111] pci 0000:00:00.0: [1002:cab3] type 0 class 0×000600
[ 0.116127] pci 0000:00:00.0: reg 10: [mem 0xb0000000-0xb3ffffff pref]
[ 0.116133] pci 0000:00:00.0: reg 14: [mem 0xb4000000-0xb4000fff pref]
[ 0.116185] pci 0000:00:01.0: [1002:7010] type 1 class 0×000604
[ 0.116234] pci 0000:00:13.0: [1002:4347] type 0 class 0x000c03
[ 0.116246] pci 0000:00:13.0: reg 10: [mem 0xf0001000-0xf0001fff]
[ 0.116298] pci 0000:00:13.1: [1002:4348] type 0 class 0x000c03
[ 0.116310] pci 0000:00:13.1: reg 10: [mem 0xf0002000-0xf0002fff]
[ 0.116364] pci 0000:00:13.2: [1002:4345] type 0 class 0x000c03
[ 0.116378] pci 0000:00:13.2: reg 10: [mem 0x00000000-0x00000fff]
[ 0.116426] pci 0000:00:13.2: supports D1 D2
[ 0.116429] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.116435] pci 0000:00:13.2: PME# disabled
[ 0.116456] pci 0000:00:14.0: [1002:4353] type 0 class 0x000c05
[ 0.116466] pci 0000:00:14.0: reg 10: [io 0xe000-0xe00f]
[ 0.116475] pci 0000:00:14.0: reg 14: [mem 0xf0000000-0xf00003ff]
[ 0.116519] pci 0000:00:14.1: [1002:4349] type 0 class 0×000101
[ 0.116530] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.116539] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.116547] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.116555] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.116564] pci 0000:00:14.1: reg 20: [io 0x8070-0x807f]
[ 0.116595] pci 0000:00:14.3: [1002:434c] type 0 class 0×000601
[ 0.116654] pci 0000:00:14.4: [1002:4342] type 1 class 0×000604
[ 0.116691] pci 0000:00:14.5: [1002:4341] type 0 class 0×000401
[ 0.116706] pci 0000:00:14.5: reg 10: [mem 0xf0000400-0xf00004ff]
[ 0.116758] pci 0000:00:14.6: [1002:434d] type 0 class 0×000703
[ 0.116770] pci 0000:00:14.6: reg 10: [mem 0xf0000500-0xf00005ff]
[ 0.116859] pci 0000:01:05.0: [1002:4437] type 0 class 0×000300
[ 0.116877] pci 0000:01:05.0: reg 10: [mem 0xa0000000-0xa7ffffff pref]
[ 0.116887] pci 0000:01:05.0: reg 14: [io 0xc000-0xc0ff]
[ 0.116896] pci 0000:01:05.0: reg 18: [mem 0xe0000000-0xe000ffff]
[ 0.116921] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.116941] pci 0000:01:05.0: supports D1 D2
[ 0.116977] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.116984] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
[ 0.116989] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff]
[ 0.116994] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff pref]
[ 0.117043] pci 0000:02:06.0: [104c:ac50] type 2 class 0×000607
[ 0.117064] pci 0000:02:06.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.117085] pci 0000:02:06.0: supports D1 D2
[ 0.117088] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117094] pci 0000:02:06.0: PME# disabled
[ 0.117117] pci 0000:02:07.0: [10ec:8139] type 0 class 0×000200
[ 0.117137] pci 0000:02:07.0: reg 10: [io 0xa000-0xa0ff]
[ 0.117148] pci 0000:02:07.0: reg 14: [mem 0xd0008000-0xd00080ff]
[ 0.117209] pci 0000:02:07.0: supports D1 D2
[ 0.117211] pci 0000:02:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.117217] pci 0000:02:07.0: PME# disabled
[ 0.117249] pci 0000:02:0a.0: [104c:8026] type 0 class 0x000c00
[ 0.117270] pci 0000:02:0a.0: reg 10: [mem 0xd0000000-0xd00007ff]
[ 0.117281] pci 0000:02:0a.0: reg 14: [mem 0xd0004000-0xd0007fff]
[ 0.117346] pci 0000:02:0a.0: supports D1 D2
[ 0.117349] pci 0000:02:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.117355] pci 0000:02:0a.0: PME# disabled
[ 0.117392] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.117398] pci 0000:00:14.4: bridge window [io 0xa000-0xbfff]
[ 0.117403] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff]
[ 0.117408] pci 0000:00:14.4: bridge window [mem 0x90000000-0x9fffffff pref]
[ 0.117413] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.117417] pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.117461] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
[ 0.117475] pci_bus 0000:00: on NUMA node 0
[ 0.117490] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[ 0.117662] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGP_._PRT]
[ 0.117820] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P2P_._PRT]
[ 0.121303] ACPI: PCI Interrupt Link [LNK0] (IRQs 5 7 10 *11)
[ 0.121453] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11)
[ 0.121603] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11)
[ 0.121749] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 10 11)
[ 0.122036] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.122047] vgaarb: loaded
[ 0.122499] SCSI subsystem initialized
[ 0.122693] libata version 3.00 loaded.
[ 0.122824] usbcore: registered new interface driver usbfs
[ 0.122884] usbcore: registered new interface driver hub
[ 0.123042] usbcore: registered new device driver usb
[ 0.123244] wmi: Mapper loaded
[ 0.123252] PCI: Using ACPI for IRQ routing
[ 0.123264] PCI: pci_cache_line_size set to 64 bytes
[ 0.123354] reserve RAM buffer: 000000000009fc00 – 000000000009ffff
[ 0.123360] reserve RAM buffer: 000000000bff0000 – 000000000bffffff
[ 0.123795] FS-Cache: Loaded
[ 0.123911] CacheFiles: Loaded
[ 0.123969] pnp: PnP ACPI init
[ 0.124049] ACPI: bus type pnp registered
[ 0.128341] pnp 00:00: [bus 00-ff]
[ 0.128351] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.128354] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.128358] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.128362] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.128365] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.128368] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.128371] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.128374] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.128377] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.128380] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.128383] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.128386] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.128389] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.128392] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.128395] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.128398] pnp 00:00: [mem 0x0c000000-0xfebfffff window]
[ 0.128402] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.128405] pnp 00:00: [mem 0xfff80000-0xffffffff]
[ 0.128580] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.128861] pnp 00:01: [io 0x0000-0x001f]
[ 0.128866] pnp 00:01: [io 0x0081-0x008f]
[ 0.128869] pnp 00:01: [io 0x00c0-0x00df]
[ 0.128874] pnp 00:01: [dma 4]
[ 0.128978] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.129014] pnp 00:02: [io 0x00f0-0x00fe]
[ 0.129039] pnp 00:02: [irq 13]
[ 0.129131] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.129170] pnp 00:03: [io 0x0070-0x0071]
[ 0.129190] pnp 00:03: [irq 8]
[ 0.129293] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.129334] pnp 00:04: [io 0x0061]
[ 0.129425] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.129461] pnp 00:05: [io 0x0060]
[ 0.129464] pnp 00:05: [io 0x0064]
[ 0.129483] pnp 00:05: [irq 1]
[ 0.129580] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.129632] pnp 00:06: [irq 12]
[ 0.129736] pnp 00:06: Plug and Play ACPI device, IDs SYN1101 SYN1100 PNP0f13 (active)
[ 0.129779] pnp 00:07: [io 0x002e-0x002f]
[ 0.129782] pnp 00:07: [io 0x0072-0x0073]
[ 0.129785] pnp 00:07: [io 0x0080]
[ 0.129787] pnp 00:07: [io 0x00b0-0x00b1]
[ 0.129791] pnp 00:07: [io 0x0092]
[ 0.129793] pnp 00:07: [io 0x0200-0x020f]
[ 0.129796] pnp 00:07: [io 0x0280-0x029f]
[ 0.129799] pnp 00:07: [io 0x040b]
[ 0.129802] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.129805] pnp 00:07: [io 0x04d6]
[ 0.129819] pnp 00:07: [io 0x0c00-0x0c01]
[ 0.129822] pnp 00:07: [io 0x0c14]
[ 0.129824] pnp 00:07: [io 0x0c50-0x0c52]
[ 0.129827] pnp 00:07: [io 0x0c6c-0x0c6f]
[ 0.129830] pnp 00:07: [io 0x0cd6-0x0cd7]
[ 0.129832] pnp 00:07: [io 0x4000-0x40fe]
[ 0.129835] pnp 00:07: [io 0x0300-0x0301]
[ 0.129838] pnp 00:07: [io 0x0310-0x031f]
[ 0.129840] pnp 00:07: [io 0x0320-0x0321]
[ 0.130018] system 00:07: [io 0x0200-0x020f] has been reserved
[ 0.130026] system 00:07: [io 0x0280-0x029f] has been reserved
[ 0.130030] system 00:07: [io 0x040b] has been reserved
[ 0.130034] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.130037] system 00:07: [io 0x04d6] has been reserved
[ 0.130041] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.130045] system 00:07: [io 0x0c14] has been reserved
[ 0.130049] system 00:07: [io 0x0c50-0x0c52] has been reserved
[ 0.130052] system 00:07: [io 0x0c6c-0x0c6f] has been reserved
[ 0.130056] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.130060] system 00:07: [io 0x4000-0x40fe] has been reserved
[ 0.130063] system 00:07: [io 0x0300-0x0301] has been reserved
[ 0.130067] system 00:07: [io 0x0310-0x031f] has been reserved
[ 0.130071] system 00:07: [io 0x0320-0x0321] has been reserved
[ 0.130080] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130304] pnp 00:08: [mem 0x00000000-0x0009ffff]
[ 0.130310] pnp 00:08: [mem 0x000ec000-0x000fffff]
[ 0.130313] pnp 00:08: [mem 0x00100000-0x0bffffff]
[ 0.130316] pnp 00:08: [mem 0xb4000000-0xb4000fff]
[ 0.130501] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.130509] system 00:08: [mem 0x000ec000-0x000fffff] could not be reserved
[ 0.130512] system 00:08: [mem 0x00100000-0x0bffffff] could not be reserved
[ 0.130516] system 00:08: [mem 0xb4000000-0xb4000fff] has been reserved
[ 0.130525] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.131218] pnp 00:09: [io 0x0378-0x037f]
[ 0.131245] pnp 00:09: [irq 7]
[ 0.131249] pnp 00:09: [io 0x0778-0x077b]
[ 0.131252] pnp 00:09: [dma 3]
[ 0.131505] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.132213] pnp 00:0a: [io 0x03e8-0x03ef]
[ 0.132242] pnp 00:0a: [irq 3]
[ 0.132247] pnp 00:0a: [dma 1]
[ 0.132250] pnp 00:0a: [io 0x0220-0x0227]
[ 0.132544] pnp 00:0a: Plug and Play ACPI device, IDs SMCf010 (active)
[ 0.132600] pnp: PnP ACPI: found 11 devices
[ 0.132605] ACPI: ACPI bus type pnp unregistered
[ 0.173173] Switching to clocksource acpi_pm
[ 0.173401] pci 0000:00:13.2: BAR 0: assigned [mem 0x0c000000-0x0c000fff]
[ 0.173416] pci 0000:00:13.2: BAR 0: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff])
[ 0.173424] pci 0000:01:05.0: BAR 6: assigned [mem 0xa8000000-0xa801ffff pref]
[ 0.173429] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.173435] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
[ 0.173440] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff]
[ 0.173444] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff pref]
[ 0.173454] pci 0000:02:06.0: BAR 15: assigned [mem 0x90000000-0x93ffffff pref]
[ 0.173459] pci 0000:02:06.0: BAR 16: assigned [mem 0xd4000000-0xd7ffffff]
[ 0.173463] pci 0000:02:06.0: BAR 0: assigned [mem 0xd0001000-0xd0001fff]
[ 0.173469] pci 0000:02:06.0: BAR 0: set to [mem 0xd0001000-0xd0001fff] (PCI address [0xd0001000-0xd0001fff])
[ 0.173473] pci 0000:02:06.0: BAR 13: assigned [io 0xa400-0xa4ff]
[ 0.173477] pci 0000:02:06.0: BAR 14: assigned [io 0xa800-0xa8ff]
[ 0.173480] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[ 0.173483] pci 0000:02:06.0: bridge window [io 0xa400-0xa4ff]
[ 0.173489] pci 0000:02:06.0: bridge window [io 0xa800-0xa8ff]
[ 0.173494] pci 0000:02:06.0: bridge window [mem 0x90000000-0x93ffffff pref]
[ 0.173500] pci 0000:02:06.0: bridge window [mem 0xd4000000-0xd7ffffff]
[ 0.173505] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.173509] pci 0000:00:14.4: bridge window [io 0xa000-0xbfff]
[ 0.173514] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff]
[ 0.173518] pci 0000:00:14.4: bridge window [mem 0x90000000-0x9fffffff pref]
[ 0.173587] pci 0000:02:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.173600] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.173603] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.173607] pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
[ 0.173610] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xefffffff]
[ 0.173613] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff pref]
[ 0.173617] pci_bus 0000:02: resource 0 [io 0xa000-0xbfff]
[ 0.173620] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xdfffffff]
[ 0.173623] pci_bus 0000:02: resource 2 [mem 0x90000000-0x9fffffff pref]
[ 0.173626] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.173629] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.173633] pci_bus 0000:03: resource 0 [io 0xa400-0xa4ff]
[ 0.173636] pci_bus 0000:03: resource 1 [io 0xa800-0xa8ff]
[ 0.173639] pci_bus 0000:03: resource 2 [mem 0x90000000-0x93ffffff pref]
[ 0.173642] pci_bus 0000:03: resource 3 [mem 0xd4000000-0xd7ffffff]
[ 0.173737] NET: Registered protocol family 2
[ 0.173868] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.174246] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.174321] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.174401] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.174409] TCP reno registered
[ 0.174420] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.174443] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.174692] NET: Registered protocol family 1
[ 0.175075] RPC: Registered udp transport module.
[ 0.175083] RPC: Registered tcp transport module.
[ 0.175085] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.175199] pci 0000:01:05.0: Boot video device
[ 0.175220] PCI: CLS 32 bytes, default 64
[ 0.175338] Trying to unpack rootfs image as initramfs…
[ 0.175338] Switched to NOHz mode on CPU #0
[ 0.592853] Freeing initrd memory: 1336k freed
[ 0.596116] Simple Boot Flag at 0×37 set to 0×80
[ 0.596447] audit: initializing netlink socket (disabled)
[ 0.596483] type=2000 audit(994201913.596:1): initialized
[ 0.601185] VFS: Disk quotas dquot_6.5.2
[ 0.601414] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.603291] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.605206] fuse init (API version 7.16)
[ 0.606306] aufs 2.2-38
[ 0.606334] msgmni has been set to 360
[ 0.608687] io scheduler noop registered
[ 0.608696] io scheduler deadline registered (default)
[ 0.608881] io scheduler cfq registered
[ 0.609151] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.609228] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.609802] vesafb: framebuffer at 0xa0000000, mapped to 0xcc880000, using 2812k, total 65472k
[ 0.609809] vesafb: mode is 800x600x24, linelength=2400, pages=45
[ 0.609812] vesafb: protected mode interface info at c000:51d1
[ 0.609816] vesafb: pmi: set display start = c00c5265, set palette = c00c52b1
[ 0.609818] vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
[ 0.609828] vesafb: scrolling: redraw
[ 0.609832] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.639644] Console: switching to colour frame buffer device 100×37
[ 0.668831] fb0: VESA VGA frame buffer device
[ 0.672219] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.676264] ACPI: AC Adapter [AC] (on-line)
[ 0.676648] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.684258] ACPI: Lid Switch [LID]
[ 0.684415] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.684427] ACPI: Power Button [PWRB]
[ 0.684563] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.684572] ACPI: Power Button [PWRF]
[ 0.684789] ACPI: Fan [FAN1] (off)
[ 0.684943] ACPI: acpi_idle registered with cpuidle
[ 0.685190] Marking TSC unstable due to TSC halts in idle
[ 0.776202] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.776210] ACPI: Thermal Zone [THZN] (49 C)
[ 0.785644] Linux agpgart interface v0.103
[ 0.788532] brd: module loaded
[ 0.789969] loop: module loaded
[ 0.791091] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.791765] scsi0 : pata_atiixp
[ 0.792495] scsi1 : pata_atiixp
[ 0.793720] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0×8070 irq 14
[ 0.793728] ata2: PATA max UDMA/100 cmd 0×170 ctl 0×376 bmdma 0×8078 irq 15
[ 0.795884] Fixed MDIO Bus: probed
[ 0.795970] e1000e: Intel(R) PRO/1000 Network Driver – 1.2.20-k2
[ 0.795974] e1000e: Copyright(c) 1999 – 2011 Intel Corporation.
[ 0.796383] Intel(R) Gigabit Ethernet Network Driver – version 2.1.0-k2
[ 0.796390] Copyright (c) 2007-2009 Intel Corporation.
[ 0.796474] Intel(R) Virtual Function Network Driver – version 1.0.8-k0
[ 0.796480] Copyright (c) 2009 – 2010 Intel Corporation.
[ 0.796666] Atheros(R) L2 Ethernet Driver – version 2.2.3
[ 0.796673] Copyright (c) 2007 Atheros Corporation.
[ 0.796841] jme: JMicron JMC2XX ethernet driver version 1.0.7
[ 0.797118] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
[ 0.797200] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.797207] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.797286] ThunderLAN driver v1.15a
[ 0.797363] TLAN: 0 devices installed, PCI: 0 EISA: 0
[ 0.797805] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[ 0.798075] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.12 (Jan 03, 2011)
[ 0.798776] sky2: driver version 1.28
[ 0.798895] via-rhine: avoid_D3 set.
[ 0.799608] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.799622] 8139cp 0000:02:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 0.799728] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 0.799802] 8139too 0000:02:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.801277] 8139too 0000:02:07.0: eth0: RealTek RTL8139 at 0xa000, 00:a0:d1:da:01:61, IRQ 18
[ 0.801730] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
[ 0.801823] winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker
[ 0.801827] http://www.scyld.com/network/drivers.html
[ 0.802121] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 0.802533] usbcore: registered new interface driver hwa-rc
[ 0.802541] usbmon: debugfs is not available
[ 0.802572] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.802661] ehci_hcd 0000:00:13.2: enabling device (0000 -> 0002)
[ 0.802677] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.802725] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.802806] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.802934] ehci_hcd 0000:00:13.2: irq 19, io mem 0x0c000000
[ 0.812851] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.813282] hub 1-0:1.0: USB hub found
[ 0.813302] hub 1-0:1.0: 6 ports detected
[ 0.813524] 116x: driver isp116x-hcd, 03 Nov 2005
[ 0.813550] driver isp1362-hcd, 2005-04-04
[ 0.813572] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.813697] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.813747] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.813788] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.813845] ohci_hcd 0000:00:13.0: irq 19, io mem 0xf0001000
[ 0.832517] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.832537] ACPI: Battery Slot [BAT1] (battery present)
[ 0.872420] hub 2-0:1.0: USB hub found
[ 0.872441] hub 2-0:1.0: 3 ports detected
[ 0.872633] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.872681] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.872716] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.872763] ohci_hcd 0000:00:13.1: irq 19, io mem 0xf0002000
[ 0.932407] hub 3-0:1.0: USB hub found
[ 0.932428] hub 3-0:1.0: 3 ports detected
[ 0.932612] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.933020] sl811: driver sl811-hcd, 19 May 2005
[ 0.933055] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 0.933376] usbcore: registered new interface driver hwa-hc
[ 0.933624] usbcore: registered new interface driver wusb-cbaf
[ 0.933631] Initializing USB Mass Storage driver…
[ 0.933701] usbcore: registered new interface driver usb-storage
[ 0.933705] USB Mass Storage support registered.
[ 0.933744] usbcore: registered new interface driver ums-alauda
[ 0.933787] usbcore: registered new interface driver ums-cypress
[ 0.933830] usbcore: registered new interface driver ums-datafab
[ 0.933894] usbcore: registered new interface driver ums-freecom
[ 0.933938] usbcore: registered new interface driver ums-isd200
[ 0.933982] usbcore: registered new interface driver ums-jumpshot
[ 0.934025] usbcore: registered new interface driver ums-karma
[ 0.934069] usbcore: registered new interface driver ums-onetouch
[ 0.934115] usbcore: registered new interface driver ums-sddr09
[ 0.934161] usbcore: registered new interface driver ums-sddr55
[ 0.934209] usbcore: registered new interface driver ums-usbat
[ 0.934329] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0×60,0×64 irq 1,12
[ 0.938134] serio: i8042 KBD port at 0×60,0×64 irq 1
[ 0.938162] serio: i8042 AUX port at 0×60,0×64 irq 12
[ 0.938678] mousedev: PS/2 mouse device common for all mice
[ 0.939477] rtc_cmos 00:03: RTC can wake from S4
[ 0.939715] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.939760] rtc0: alarms up to one month, 114 bytes nvram
[ 0.939846] cpuidle: using governor ladder
[ 0.939994] cpuidle: using governor menu
[ 0.940095] sdhci: Secure Digital Host Controller Interface driver
[ 0.940099] sdhci: Copyright(c) Pierre Ossman
[ 0.940246] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 0.940252] wbsd: Copyright(c) Pierre Ossman
[ 0.940333] via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.
[ 0.940490] usbcore: registered new interface driver ushc
[ 0.941283] usbcore: registered new interface driver usbhid
[ 0.941291] usbhid: USB HID core driver
[ 0.941686] TCP cubic registered
[ 0.941697] NET: Registered protocol family 17
[ 0.941750] Registering the dns_resolver key type
[ 0.941836] Using IPI No-Shortcut mode
[ 0.942373] registered taskstats version 1
[ 0.942713] rtc_cmos 00:03: setting system clock to 2001-07-03 23:12:06 UTC (994201926)
[ 0.942721] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.942723] EDD information not available.
[ 0.946491] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.976441] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R2512, 1420, max UDMA/33
[ 0.992389] ata2.00: configured for UDMA/33
[ 0.998931] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R2512 1420 PQ: 0 ANSI: 5
[ 1.002141] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.002151] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.002458] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.002734] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.002845] Freeing unused kernel memory: 400k freed
[ 1.003792] Write protecting the kernel text: 5936k
[ 1.003837] Write protecting the kernel read-only data: 2452k
[ 1.180136] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 1.322993] scsi2 : usb-storage 1-3:1.0
[ 1.584074] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 1.671595] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0×804713/0×0/0×0
[ 1.671611] synaptics: Toshiba Satellite A60 detected, limiting rate to 40pps.
[ 1.722590] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 1.751553] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input5
[ 1.752958] generic-usb 0003:062A:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:13.0-1/input0
[ 2.329172] scsi 2:0:0:0: Direct-Access JetFlash TS1GJFV30 8.07 PQ: 0 ANSI: 2
[ 2.332507] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.333512] sd 2:0:0:0: [sda] 1996800 512-byte logical blocks: (1.02 GB/975 MiB)
[ 2.334131] sd 2:0:0:0: [sda] Write Protect is off
[ 2.334141] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 2.334145] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 2.337004] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 2.430459] sda: sda1
[ 2.432999] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 2.433011] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 3.634224] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3.720131] ISO 9660 Extensions: RRIP_1991A
[ 5.019646] UDF-fs: No partition found (1)
[ 5.207274] aufs test_add:262:mount[336]: uid/gid/perm /squashfs 1000/1000/0755, 0/0/0777
[ 6.123432] systemd[1]: systemd 29 running in system mode. (-PAM -LIBWRAP -AUDIT -SELINUX -SYSVINIT -LIBCRYPTSETUP; other)
[ 6.280433] systemd[1]: /sbin/modprobe failed with error code 1.
[ 6.280884] systemd[1]: Set hostname to .
[ 6.402125] systemd[1]: Failed to fully start up daemon: No such file or directory
>[ 6.609974] udevd[354]: starting version 173
[ 8.153653] IR NEC protocol handler initialized
[ 8.170125] IR RC5(x) protocol handler initialized
[ 8.186903] IR RC6 protocol handler initialized
[ 8.205723] IR JVC protocol handler initialized
[ 8.225734] IR Sony protocol handler initialized
[ 8.243904] lirc_dev: IR Remote Control driver registered, major 251
[ 8.251764] IR LIRC bridge handler initialized
[ 9.024895] crond[409]: crond: crond (busybox 1.19.2) started, log level 8
[ 12.904427] agpgart-ati 0000:00:00.0: Ati IGP7000/M chipset
[ 12.904629] reserve_ram_pages_type failed 0x6db8000-0x6db9000, track 0×10, req 0×10
[ 12.905350] reserve_ram_pages_type failed 0x770e000-0x770f000, track 0×10, req 0×10
[ 12.906492] reserve_ram_pages_type failed 0×7728000-0×7729000, track 0×10, req 0×10
[ 12.907206] reserve_ram_pages_type failed 0×7358000-0×7359000, track 0×10, req 0×10
[ 12.907798] reserve_ram_pages_type failed 0x6d1b000-0x6d1c000, track 0×10, req 0×10
[ 12.908470] reserve_ram_pages_type failed 0x6dab000-0x6dac000, track 0×10, req 0×10
[ 12.909161] reserve_ram_pages_type failed 0x6d5f000-0x6d60000, track 0×10, req 0×10
[ 12.910262] reserve_ram_pages_type failed 0x772c000-0x772d000, track 0×10, req 0×10
[ 12.910979] reserve_ram_pages_type failed 0x77d5000-0x77d6000, track 0×10, req 0×10
[ 12.911568] reserve_ram_pages_type failed 0×7683000-0×7684000, track 0×10, req 0×10
[ 12.912230] reserve_ram_pages_type failed 0x772a000-0x772b000, track 0×10, req 0×10
[ 12.912813] reserve_ram_pages_type failed 0x6e0f000-0x6e10000, track 0×10, req 0×10
[ 12.913400] reserve_ram_pages_type failed 0x6ea5000-0x6ea6000, track 0×10, req 0×10
[ 12.913987] reserve_ram_pages_type failed 0x6d18000-0x6d19000, track 0×10, req 0×10
[ 12.920409] reserve_ram_pages_type failed 0x730e000-0x730f000, track 0×10, req 0×10
[ 12.920998] reserve_ram_pages_type failed 0x6e9c000-0x6e9d000, track 0×10, req 0×10
[ 12.921585] reserve_ram_pages_type failed 0×7779000-0x777a000, track 0×10, req 0×10
[ 12.935680] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xb0000000
[ 13.115888] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.401951] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xe000, revision 0
[ 13.660510] [Firmware Bug]: ACPI(VGA0) defines _DOD but not _DOS
[ 13.661145] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6
[ 13.661634] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
[ 14.312466] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 14.341696] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 14.531890] firewire_ohci 0000:02:0a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 14.588377] firewire_ohci: Added fw-ohci device 0000:02:0a.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0×2
[ 14.857462] parport_pc 00:09: reported by Plug and Play ACPI
[ 14.857526] parport0: PC-style at 0×378 (0×778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 15.088680] firewire_core: created device fw0: GUID 00080da0d1da0161, S400
[ 15.387510] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.387526] serial 0000:00:14.6: PCI INT B disabled
[ 17.207813] ppdev: user-space parallel port driver
[ 17.304300] [drm] Initialized drm 1.1.0 20060810
[ 18.645841] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 18.646986] atiixp: codec reset timeout
[ 19.516725] [drm] radeon defaulting to kernel modesetting.
[ 19.516736] [drm] radeon kernel modesetting enabled.
[ 19.518486] checking generic (a0000000 3ff0000) vs hw (a0000000 8000000)
[ 19.518494] fb: conflicting fb hw usage radeondrmfb vs VESA VGA – removing generic driver
[ 19.518549] Console: switching to colour dummy device 80×25
[ 19.524748] radeon 0000:01:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.537383] [drm] initializing kernel modesetting (RS200 0×1002:0×4437).
[ 19.537490] [drm] register mmio base: 0xE0000000
[ 19.537493] [drm] register mmio size: 65536
[ 19.537768] agpgart-ati 0000:00:00.0: AGP 2.0 bridge
[ 19.537806] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x mode
[ 19.537835] radeon 0000:01:05.0: putting AGP V2 device into 4x mode
[ 19.537860] radeon 0000:01:05.0: GTT: 64M 0xB0000000 – 0xB3FFFFFF
[ 19.537872] radeon 0000:01:05.0: VRAM: 64M 0x000000000C000000 – 0x000000000FFFFFFF (64M used)
[ 19.537887] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 19.537890] [drm] Driver supports precise vblank timestamp query.
[ 19.537946] [drm] radeon: irq initialized.
[ 19.538082] [drm] Detected VRAM RAM=64M, BAR=128M
[ 19.538091] [drm] RAM width 64bits DDR
[ 19.544470] [TTM] Zone kernel: Available graphics memory: 92536 kiB.
[ 19.544478] [TTM] Initializing pool allocator.
[ 19.544538] [drm] radeon: 64M of VRAM memory ready
[ 19.544544] [drm] radeon: 64M of GTT memory ready.
[ 19.603159] radeon 0000:01:05.0: WB disabled
[ 19.605255] [drm] Loading R100 Microcode
[ 21.563154] [drm] radeon: ring at 0x00000000B0001000
[ 21.563182] [drm] ring test succeeded in 1 usecs
[ 21.563666] [drm] radeon: ib pool ready.
[ 21.563710] [drm] ib test succeeded in 0 usecs
[ 21.598908] [drm] Panel ID String: LGP
[ 21.598915] [drm] Panel Size 1024×768
[ 21.599143] [drm] Radeon Display Connectors
[ 21.599149] [drm] Connector 0:
[ 21.599152] [drm] VGA
[ 21.599159] [drm] DDC: 0×60 0×60 0×60 0×60 0×60 0×60 0×60 0×60
[ 21.599162] [drm] Encoders:
[ 21.599166] [drm] CRT1: INTERNAL_DAC1
[ 21.599170] [drm] Connector 1:
[ 21.599173] [drm] LVDS
[ 21.599175] [drm] DDC: 0×198 0×198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[ 21.599177] [drm] Encoders:
[ 21.599181] [drm] LCD1: INTERNAL_LVDS
[ 21.599185] [drm] Connector 2:
[ 21.599186] [drm] S-video
[ 21.599188] [drm] Encoders:
[ 21.599190] [drm] TV1: INTERNAL_DAC2
[ 21.756723] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 22.360144] [drm] fb mappable at 0xA0040000
[ 22.360154] [drm] vram apper at 0xA0000000
[ 22.360157] [drm] size 3145728
[ 22.360159] [drm] fb depth is 24
[ 22.360161] [drm] pitch is 4096
[ 22.360705] fbcon: radeondrmfb (fb0) is primary device
[ 22.492428] Console: switching to colour frame buffer device 128×48
[ 22.507066] fb0: radeondrmfb frame buffer device
[ 22.507072] drm: registered panic notifier
[ 22.520190] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[ 27.915065] CIFS VFS: Send error in SessSetup = -11
[ 27.915131] CIFS VFS: cifs_mount failed w/return code = -11
[ 27.919110] CIFS VFS: cifs_mount failed w/return code = -13
[ 27.932194] CIFS VFS: cifs_mount failed w/return code = -13

• This reply was modified 15 days ago by dbojan.