GeeXboXgoogle

MCE RC6 Remote on Cubox-i4-pro

May 4th, 2014

Home › Forums › GeeXboX on ARM SoCs › MCE RC6 Remote on Cubox-i4-pro

Tagged: , ,

This topic contains 2 replies, has 3 voices, and was last updated by Warped Rudi 3 months, 1 week ago.

Viewing 3 posts – 1 through 3 (of 3 total)
  • Author
    Posts
  • May 4, 2014 at 03:48 #8030

    tracker1
    Member

    I’m currently running the MCE remote via my cubox-i4-pro via the usb adapter. I’m curious if anyone has a configuration/instructions for using the built in IR scanner?

    May 4, 2014 at 08:07 #8037

    tomlohave
    Moderator

    Hello,
    look here :
    http://imx.solid-run.com/wiki/index.php?title=GeeXboX#Remote_control

    May 4, 2014 at 09:19 #8040

    Warped Rudi
    Moderator

    If it’s a regular MCE remote then – instead of doing all this complicated stuff mentioned on the wiki – just uncomment the line ‘#KEYMAPS=”rc6_mce rc6_mce2″‘ in “/usr/bin/change-rc”, re-run the script and you are set.

  • Author
    Posts
Viewing 3 posts – 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Comments are closed.