Latest GeeXbox for OLD computer: NO GUI

Home Forums GeeXboX for PC Latest GeeXbox for OLD computer: NO GUI

This topic contains 11 replies, has 4 voices, and was last updated by  rustynail73 5 years, 3 months ago.

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #7928

    zhhcui
    Member

    Computer: Pentium III 733MHz, SD RAM 256MB, HDD 20GB x2, VGA Geforce 2, NET 8139, Motherboard i815.
    Latest GeeXBox i386 version.

    Successfully boot to debug mode. Normal mode can get black screen and a mouse icon on middle position of screen.
    Can anyone give me suggestions?

    dmesg log:

    
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.10.9 (thomas@servA) (gcc version 4.7.3 (GCC) ) #1 SMP Thu Oct 31 12:21:56 CET 2013
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
    [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffeffff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000fff0000-0x000000000fff2fff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x000000000fff3000-0x000000000fffffff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
    [    0.000000] SMBIOS 2.2 present.
    [    0.000000] DMI:    /i815-ITE8712, BIOS 6.00 PG 05/31/2000
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] e820: last_pfn = 0xfff0 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-C7FFF write-protect
    [    0.000000]   C8000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-through
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FF0000000 write-back
    [    0.000000]   1 disabled
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] PAT not supported by CPU.
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
    [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x0f800000-0x0fbfffff]
    [    0.000000]  [mem 0x0f800000-0x0fbfffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x08000000-0x0f7fffff]
    [    0.000000]  [mem 0x08000000-0x0f7fffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff]
    [    0.000000]  [mem 0x00100000-0x003fffff] page 4k
    [    0.000000]  [mem 0x00400000-0x07ffffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x0fc00000-0x0ffeffff]
    [    0.000000]  [mem 0x0fc00000-0x0ffeffff] page 4k
    [    0.000000] BRK [0x01a8a000, 0x01a8afff] PGTABLE
    [    0.000000] RAMDISK: [mem 0x0fea4000-0x0ffeefff]
    [    0.000000] ACPI: RSDP 000f7350 00014 (v00 GBT   )
    [    0.000000] ACPI: RSDT 0fff3000 00028 (v01 GBT    AWRDACPI 42302E31 AWRD 00000000)
    [    0.000000] ACPI: FACP 0fff3040 00074 (v01 GBT    AWRDACPI 42302E31 AWRD 00000000)
    [    0.000000] ACPI: DSDT 0fff30c0 02B0D (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
    [    0.000000] ACPI: FACS 0fff0000 00040
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 255MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 0fff0000
    [    0.000000]   low ram: 0 - 0fff0000
    [    0.000000] BRK [0x01a8b000, 0x01a8bfff] PGTABLE
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
    [    0.000000]   Normal   [mem 0x01000000-0x0ffeffff]
    [    0.000000]   HighMem  empty
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
    [    0.000000]   node   0: [mem 0x00100000-0x0ffeffff]
    [    0.000000] On node 0 totalpages: 65423
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3999 pages, LIFO batch:0
    [    0.000000]   Normal zone: 480 pages used for memmap
    [    0.000000]   Normal zone: 61424 pages, LIFO batch:15
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x4008
    [    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
    [    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
    [    0.000000] APIC: disable apic facility
    [    0.000000] APIC: switched to apic NOOP
    [    0.000000] nr_irqs_gsi: 16
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [    0.000000] e820: [mem 0x10000000-0xffafffff] available for PCI devices
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 12 pages/cpu @cfc95000 s26560 r0 d22592 u49152
    [    0.000000] pcpu-alloc: s26560 r0 d22592 u49152 alloc=12*4096
    [    0.000000] pcpu-alloc: [0] 0 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64911
    [    0.000000] Kernel command line: initrd=/boot/initrd root=UUID=c99ee078-c157-4b60-aa63-93e1358b11c9 rootfs=flat vga=792 quiet loglevel=3 rw BOOT_IMAGE=/boot/vmlinuz 
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 247172k/262080k available (6786k kernel code, 14520k reserved, 3101k data, 440k init, 0k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xd07f0000 - 0xff7fe000   ( 752 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
    [    0.000000]       .init : 0xc19a8000 - 0xc1a16000   ( 440 kB)
    [    0.000000]       .data : 0xc16a095d - 0xc19a7fc0   (3101 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc16a095d   (6786 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
    [    0.000000] NR_IRQS:2304 nr_irqs:256 16
    [    0.000000] CPU 0 irqstacks, hard=cf806000 soft=cf808000
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 734.997 MHz processor
    [    0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 1469.99 BogoMIPS (lpj=2939988)
    [    0.008018] pid_max: default: 32768 minimum: 301
    [    0.008149] Mount-cache hash table entries: 512
    [    0.008858] Initializing cgroup subsys devices
    [    0.008871] Initializing cgroup subsys freezer
    [    0.008879] Initializing cgroup subsys blkio
    [    0.008963] CPU serial number disabled.
    [    0.009010] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
    [    0.009010] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
    [    0.009010] tlb_flushall_shift: 6
    [    0.020219] Freeing SMP alternatives: 28k freed
    [    0.020278] ACPI: Core revision 20130328
    [    0.020697] ACPI Warning: Unsupported module-level executable opcode 0x7B at table offset 0x00AB (20130328/psloop-226)
    [    0.020720] ACPI Warning: Unsupported module-level executable opcode 0x7B at table offset 0x00B0 (20130328/psloop-226)
    [    0.025751] ACPI: All ACPI Tables successfully acquired
    [    0.025769] ACPI: setting ELCR to 0200 (from 1a20)
    [    0.028353] smpboot: weird, boot CPU (#0) not listed by the BIOS
    [    0.028363] smpboot: SMP motherboard not detected
    [    0.028371] smpboot: Local APIC not detected. Using dummy APIC emulation.
    [    0.028376] smpboot: SMP disabled
    [    0.028419] Performance Events: 
    [    0.028430] no APIC, boot with the "lapic" boot parameter to force-enable it.
    [    0.028436] no hardware sampling interrupt available.
    [    0.028443] p6 PMU driver.
    [    0.028455] ... version:                0
    [    0.028461] ... bit width:              32
    [    0.028466] ... generic registers:      2
    [    0.028472] ... value mask:             00000000ffffffff
    [    0.032016] ... max period:             000000007fffffff
    [    0.032023] ... fixed-purpose events:   0
    [    0.032028] ... event mask:             0000000000000003
    [    0.032676] Brought up 1 CPUs
    [    0.032688] smpboot: Total of 1 processors activated (1469.99 BogoMIPS)
    [    0.033323] devtmpfs: initialized
    [    0.035115] PM: Registering ACPI NVS region [mem 0x0fff0000-0x0fff2fff] (12288 bytes)
    [    0.035526] regulator-dummy: no parameters
    [    0.035722] NET: Registered protocol family 16
    [    0.037123] ACPI: bus type PCI registered
    [    0.062535] PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=2
    [    0.062543] PCI: Using configuration type 1 for base access
    [    0.070480] bio: create slab <bio-0> at 0
    [    0.070856] ACPI: Added _OSI(Module Device)
    [    0.070868] ACPI: Added _OSI(Processor Device)
    [    0.070876] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.070884] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.072431] ACPI: EC: Look up EC in DSDT
    [    0.074102] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.078106] ACPI: Interpreter enabled
    [    0.078162] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [    0.078179] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568)
    [    0.078220] ACPI: (supports S0 S1 S4 S5)
    [    0.078229] ACPI: Using PIC for interrupt routing
    [    0.078320] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.078476] ACPI: No dock devices found.
    [    0.091393] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.091789] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
    [    0.091802] acpi PNP0A03:00: host bridge window [io  0x0d00-0x3fff] (ignored)
    [    0.091813] acpi PNP0A03:00: host bridge window [io  0x40f8-0x4fff] (ignored)
    [    0.091823] acpi PNP0A03:00: host bridge window [io  0x5010-0xffff] (ignored)
    [    0.091834] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.091844] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    [    0.091854] acpi PNP0A03:00: host bridge window [mem 0x10000000-0xffefffff] (ignored)
    [    0.091864] PCI: root bus 00: using default resources
    [    0.091877] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
    [    0.092151] PCI host bridge to bus 0000:00
    [    0.092169] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.092180] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
    [    0.092190] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [    0.092229] pci 0000:00:00.0: [8086:1130] type 00 class 0x060000
    [    0.092258] pci 0000:00:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref]
    [    0.092538] pci 0000:00:01.0: [8086:1131] type 01 class 0x060400
    [    0.092799] pci 0000:00:1e.0: [8086:2418] type 01 class 0x060400
    [    0.092896] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [    0.093028] pci 0000:00:1f.0: [8086:2410] type 00 class 0x060100
    [    0.093125] pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
    [    0.093140] pci 0000:00:1f.0: quirk: [io  0x4080-0x40bf] claimed by ICH4 GPIO
    [    0.093277] pci 0000:00:1f.1: [8086:2411] type 00 class 0x010180
    [    0.093341] pci 0000:00:1f.1: reg 20: [io  0xf000-0xf00f]
    [    0.093563] pci 0000:00:1f.2: [8086:2412] type 00 class 0x0c0300
    [    0.093628] pci 0000:00:1f.2: reg 20: [io  0xd000-0xd01f]
    [    0.093731] pci 0000:00:1f.2: System wakeup disabled by ACPI
    [    0.093854] pci 0000:00:1f.5: [8086:2415] type 00 class 0x040100
    [    0.093881] pci 0000:00:1f.5: reg 10: [io  0xd800-0xd8ff]
    [    0.093901] pci 0000:00:1f.5: reg 14: [io  0xdc00-0xdc3f]
    [    0.094240] pci 0000:01:00.0: [10de:0151] type 00 class 0x030000
    [    0.094271] pci 0000:01:00.0: reg 10: [mem 0xdc000000-0xdcffffff]
    [    0.094290] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref]
    [    0.094338] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [    0.094512] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.094528] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xddffffff]
    [    0.094540] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff pref]
    [    0.094651] pci 0000:02:05.0: [10ec:8139] type 00 class 0x020000
    [    0.094682] pci 0000:02:05.0: reg 10: [io  0xc000-0xc0ff]
    [    0.094702] pci 0000:02:05.0: reg 14: [mem 0xdf000000-0xdf0000ff]
    [    0.094758] pci 0000:02:05.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [    0.094800] pci 0000:02:05.0: supports D1 D2
    [    0.094810] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
    [    0.094996] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
    [    0.095010] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
    [    0.095024] pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdfffffff]
    [    0.095038] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
    [    0.095048] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [    0.095071] pci_bus 0000:00: on NUMA node 0
    [    0.095087] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [    0.095098] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [    0.095430] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
    [    0.095697] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [    0.095963] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [    0.096276] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
    [    0.098576] acpi root: \_SB_.PCI0 notify handler is installed
    [    0.098643] Found 1 acpi root devices
    [    0.099002] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.099011] vgaarb: loaded
    [    0.099017] vgaarb: bridge control possible 0000:01:00.0
    [    0.099607] SCSI subsystem initialized
    [    0.099620] ACPI: bus type ATA registered
    [    0.099774] libata version 3.00 loaded.
    [    0.099863] ACPI: bus type USB registered
    [    0.100037] usbcore: registered new interface driver usbfs
    [    0.100086] usbcore: registered new interface driver hub
    [    0.100184] usbcore: registered new device driver usb
    [    0.100265] pps_core: LinuxPPS API ver. 1 registered
    [    0.100272] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    0.100291] PTP clock support registered
    [    0.100488] wmi: Mapper loaded
    [    0.100495] PCI: Using ACPI for IRQ routing
    [    0.100508] PCI: pci_cache_line_size set to 32 bytes
    [    0.100574] e820: reserve RAM buffer [mem 0x0fff0000-0x0fffffff]
    [    0.101588] Switching to clocksource pit
    [    0.101878] FS-Cache: Loaded
    [    0.102015] CacheFiles: Loaded
    [    0.102073] pnp: PnP ACPI init
    [    0.102106] ACPI: bus type PNP registered
    [    0.102886] system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
    [    0.102900] system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
    [    0.102912] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
    [    0.102923] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
    [    0.102935] system 00:00: [mem 0x0fff0000-0x0fffffff] could not be reserved
    [    0.102946] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.102958] system 00:00: [mem 0x00100000-0x0ffeffff] could not be reserved
    [    0.102969] system 00:00: [mem 0xffb00000-0xffb7ffff] has been reserved
    [    0.102981] system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
    [    0.102992] system 00:00: [mem 0x000e0000-0x000effff] has been reserved
    [    0.103010] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.103143] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.103708] system 00:02: [io  0x03f0-0x03f1] has been reserved
    [    0.103721] system 00:02: [io  0x04d0-0x04d1] has been reserved
    [    0.103733] system 00:02: [io  0x0290-0x029f] has been reserved
    [    0.103744] system 00:02: [io  0x0800-0x0805] has been reserved
    [    0.103757] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.103811] pnp 00:03: [dma 4]
    [    0.103890] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.103890] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.103890] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.103890] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.103890] pnp 00:07: [dma 2]
    [    0.103890] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [    0.104053] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.105075] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
    [    0.105934] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
    [    0.106426] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.107185] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active)
    [    0.107819] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
    [    0.107857] pnp: PnP ACPI: found 14 devices
    [    0.107864] ACPI: bus type PNP unregistered
    [    0.148338] Switching to clocksource acpi_pm
    [    0.148612] pci 0000:00:1e.0: BAR 15: assigned [mem 0x10000000-0x100fffff pref]
    [    0.148631] pci 0000:01:00.0: BAR 6: assigned [mem 0xdd000000-0xdd00ffff pref]
    [    0.148646] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.148662] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xddffffff]
    [    0.148675] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff pref]
    [    0.148693] pci 0000:02:05.0: BAR 6: assigned [mem 0x10000000-0x1000ffff pref]
    [    0.148703] pci 0000:00:1e.0: PCI bridge to [bus 02]
    [    0.148715] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
    [    0.148730] pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdfffffff]
    [    0.148743] pci 0000:00:1e.0:   bridge window [mem 0x10000000-0x100fffff pref]
    [    0.148785] pci 0000:00:1e.0: setting latency timer to 64
    [    0.148799] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
    [    0.148809] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [    0.148821] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xddffffff]
    [    0.148831] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref]
    [    0.148842] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
    [    0.148852] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdfffffff]
    [    0.148863] pci_bus 0000:02: resource 2 [mem 0x10000000-0x100fffff pref]
    [    0.148873] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
    [    0.148883] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
    [    0.149073] NET: Registered protocol family 2
    [    0.149781] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.149858] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.149925] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.150047] TCP: reno registered
    [    0.150061] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.150100] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.150325] NET: Registered protocol family 1
    [    0.150833] RPC: Registered named UNIX socket transport module.
    [    0.150846] RPC: Registered udp transport module.
    [    0.150851] RPC: Registered tcp transport module.
    [    0.150858] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.151522] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    [    0.151533] PCI: setting IRQ 11 as level-triggered
    [    0.151724] pci 0000:01:00.0: Boot video device
    [    0.151740] PCI: CLS 0 bytes, default 32
    [    0.151947] Trying to unpack rootfs image as initramfs...
    [    0.904635] Freeing initrd memory: 1324k freed
    [    0.912953] Scanning for low memory corruption every 60 seconds
    [    0.913975] audit: initializing netlink socket (disabled)
    [    0.914029] type=2000 audit(946684887.908:1): initialized
    [    0.914934] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.920420] VFS: Disk quotas dquot_6.5.2
    [    0.920629] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.922133] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.923505] NFS: Registering the id_resolver key type
    [    0.923566] Key type id_resolver registered
    [    0.923573] Key type id_legacy registered
    [    0.924288] fuse init (API version 7.22)
    [    0.925074] aufs 3.10-20130826
    [    0.925098] msgmni has been set to 485
    [    0.927310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.927331] io scheduler noop registered
    [    0.927339] io scheduler deadline registered (default)
    [    0.927443] io scheduler cfq registered
    [    0.927798] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.927864] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.928132] vesafb: mode is 1024x768x32, linelength=4096, pages=1
    [    0.928142] vesafb: protected mode interface info at c000:bd00
    [    0.928151] vesafb: pmi: set display start = c00cbd45, set palette = c00cbdca
    [    0.928157] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
    [    0.928198] vesafb: scrolling: redraw
    [    0.928210] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [    0.929722] vesafb: framebuffer at 0xd0000000, mapped to 0xd0880000, using 6144k, total 65536k
    [    0.984383] Console: switching to colour frame buffer device 128x48
    [    1.038560] fb0: VESA VGA frame buffer device
    [    1.038792] intel_idle: does not run on family 6 model 8
    [    1.039090] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    1.039108] ACPI: Power Button [PWRB]
    [    1.039251] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
    [    1.039265] ACPI: Sleep Button [SLPB]
    [    1.039422] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [    1.039433] ACPI: Power Button [PWRF]
    [    1.039556] ACPI: Fan [FAN] (on)
    [    1.039695] tsc: Marking TSC unstable due to TSC halts in idle
    [    1.039715] ACPI: acpi_idle registered with cpuidle
    [    1.045507] thermal LNXTHERM:00: registered as thermal_zone0
    [    1.045521] ACPI: Thermal Zone [THRM] (27 C)
    [    1.050576] Linux agpgart interface v0.103
    [    1.055212] brd: module loaded
    [    1.057792] loop: module loaded
    [    1.058552] ata_piix 0000:00:1f.1: version 2.13
    [    1.058753] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    1.059766] scsi0 : ata_piix
    [    1.060148] scsi1 : ata_piix
    [    1.060280] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    1.060291] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    1.063615] libphy: Fixed MDIO Bus: probed
    [    1.064871] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
    [    1.064980] Atheros(R) L2 Ethernet Driver - version 2.2.3
    [    1.064987] Copyright (c) 2007 Atheros Corporation.
    [    1.065217] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
    [    1.065445] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
    [    1.065499] v1.01-e (2.4 port) Sep-11-2006  Donald Becker <becker@scyld.com>
    [    1.065499]   http://www.scyld.com/network/drivers.html
    [    1.065691] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
    [    1.065865] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [    1.065873] e100: Copyright(c) 1999-2006 Intel Corporation
    [    1.065931] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [    1.065937] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [    1.066000] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k
    [    1.066006] igb: Copyright (c) 2007-2013 Intel Corporation.
    [    1.066063] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
    [    1.066070] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
    [    1.066170] jme: JMicron JMC2XX ethernet driver version 1.0.8
    [    1.066272] sky2: driver version 1.30
    [    1.066442] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
    [    1.066528] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
    [    1.066689] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    [    1.066707] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
    [    1.066785] 8139too: 8139too Fast Ethernet driver 0.9.28
    [    1.067432] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    [    1.068408] 8139too 0000:02:05.0 eth0: RealTek RTL8139 at 0x0001c000, 00:e0:4c:63:0b:01, IRQ 11
    [    1.068853] tlan: ThunderLAN driver v1.17
    [    1.068904] tlan: 0 devices installed, PCI: 0  EISA: 0
    [    1.068940] via_rhine: Broken BIOS detected, avoid_D3 enabled
    [    1.069259] usbcore: registered new interface driver hwa-rc
    [    1.069504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.069512] ehci-pci: EHCI PCI platform driver
    [    1.069565] ehci-platform: EHCI generic platform driver
    [    1.069661] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.069726] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.070032] uhci_hcd 0000:00:1f.2: setting latency timer to 64
    [    1.070045] uhci_hcd 0000:00:1f.2: UHCI Host Controller
    [    1.070192] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
    [    1.070261] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
    [    1.070785] hub 1-0:1.0: USB hub found
    [    1.070808] hub 1-0:1.0: 2 ports detected
    [    1.071366] usbcore: registered new interface driver hwa-hc
    [    1.071619] usbcore: registered new interface driver wusb-cbaf
    [    1.071686] usbcore: registered new interface driver cdc_acm
    [    1.071693] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [    1.071787] usbcore: registered new interface driver usb-storage
    [    1.071822] usbcore: registered new interface driver ums-alauda
    [    1.071866] usbcore: registered new interface driver ums-cypress
    [    1.071903] usbcore: registered new interface driver ums-datafab
    [    1.071938] usbcore: registered new interface driver ums-freecom
    [    1.071981] usbcore: registered new interface driver ums-isd200
    [    1.072097] usbcore: registered new interface driver ums-jumpshot
    [    1.072135] usbcore: registered new interface driver ums-karma
    [    1.072171] usbcore: registered new interface driver ums-onetouch
    [    1.072207] usbcore: registered new interface driver ums-sddr09
    [    1.072244] usbcore: registered new interface driver ums-sddr55
    [    1.072280] usbcore: registered new interface driver ums-usbat
    [    1.072452] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    1.072460] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.073492] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.073889] mousedev: PS/2 mouse device common for all mice
    [    1.074578] rtc_cmos 00:04: RTC can wake from S4
    [    1.074886] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [    1.074930] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram
    [    1.075152] cpuidle: using governor ladder
    [    1.075228] cpuidle: using governor menu
    [    1.075257] sdhci: Secure Digital Host Controller Interface driver
    [    1.075263] sdhci: Copyright(c) Pierre Ossman
    [    1.075322] wbsd: Winbond W83L51xD SD/MMC card interface driver
    [    1.075328] wbsd: Copyright(c) Pierre Ossman
    [    1.075499] usbcore: registered new interface driver ushc
    [    1.075506] sdhci-pltfm: SDHCI platform and OF driver helper
    [    1.075894] hidraw: raw HID events driver (C) Jiri Kosina
    [    1.076429] usbcore: registered new interface driver usbhid
    [    1.076436] usbhid: USB HID core driver
    [    1.076695] TCP: cubic registered
    [    1.076706] NET: Registered protocol family 17
    [    1.076835] Key type dns_resolver registered
    [    1.077440] Using IPI No-Shortcut mode
    [    1.077900] registered taskstats version 1
    [    1.078509] rtc_cmos 00:04: setting system clock to 2000-01-01 00:01:28 UTC (946684888)
    [    1.078581] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.078588] EDD information not available.
    [    1.104147] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [    1.220760] ata2.00: ATAPI: E-IDE CD-ROM Max 50X, Ver6.40G, max UDMA/33
    [    1.228222] ata2.00: configured for UDMA/33
    [    1.236849] ata1.00: ATA-5: FUJITSU MPF3204AT, 0031, max UDMA/66
    [    1.236861] ata1.00: 40031712 sectors, multi 16: LBA 
    [    1.236881] ata1.01: ATA-4: ST320413A, 3.53, max UDMA/100
    [    1.236890] ata1.01: 39102336 sectors, multi 16: LBA 
    [    1.252528] ata1.00: configured for UDMA/66
    [    1.268204] ata1.01: configured for UDMA/66
    [    1.268650] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MPF3204A 0031 PQ: 0 ANSI: 5
    [    1.269411] sd 0:0:0:0: [sda] 40031712 512-byte logical blocks: (20.4 GB/19.0 GiB)
    [    1.269622] sd 0:0:0:0: [sda] Write Protect is off
    [    1.269635] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.269728] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.270429] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.790581]  sda: sda1
    [    1.790852] scsi 0:0:1:0: Direct-Access     ATA      ST320413A        3.53 PQ: 0 ANSI: 5
    [    1.791554] sd 0:0:1:0: [sdb] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
    [    1.792230] sd 0:0:1:0: [sdb] Write Protect is off
    [    1.792247] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    [    1.792340] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.792434] sd 0:0:1:0: Attached scsi generic sg1 type 0
    [    1.793471] scsi 1:0:0:0: CD-ROM            E-IDE    CD-ROM Max 50X   6.40 PQ: 0 ANSI: 5
    [    1.794482] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.795361] sr0: scsi3-mmc drive: 1x/50x cd/rw xa/form2 cdda tray
    [    1.795376] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.795759] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.796187] sr 1:0:0:0: Attached scsi generic sg2 type 5
    [    1.808125]  sdb: sdb1 sdb2
    [    1.809157] sd 0:0:1:0: [sdb] Attached SCSI disk
    [    1.809258] Freeing unused kernel memory: 440k freed
    [    1.811261] Write protecting the kernel text: 6788k
    [    1.811451] Write protecting the kernel read-only data: 2724k
    [    2.497706] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
    [    2.498649] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
    [    2.543250] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    3.721336] systemd[1]: Failed to insert module 'ipv6'
    [    5.297038] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [    5.355773] [drm] Initialized drm 1.1.0 20060810
    [    5.803446] systemd-udevd[132]: starting version 206
    [    6.529132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    6.537073] agpgart-intel 0000:00:00.0: Intel i815 Chipset
    [    6.549716] parport_pc 00:0a: reported by Plug and Play ACPI
    [    6.549780] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [    6.560252] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xd8000000
    [    7.153376] checking generic (d0000000 4000000) vs hw (d0000000 8000000)
    [    7.153396] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
    [    7.153503] Console: switching to colour dummy device 80x25
    [    7.154502] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
    [    7.154514] PCI: setting IRQ 12 as level-triggered
    [    7.160856] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x015100a4
    [    7.160876] nouveau  [  DEVICE][0000:01:00.0] Chipset: NV15 (NV15)
    [    7.160885] nouveau  [  DEVICE][0000:01:00.0] Family : NV10
    [    7.172496] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
    [    7.203941] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
    [    7.203954] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
    [    7.203966] nouveau  [   VBIOS][0000:01:00.0] BMP version 5.14
    [    7.204384] nouveau  [   VBIOS][0000:01:00.0] version 03.15.01.04.00
    [    7.212173] nouveau W[   VBIOS][0000:01:00.0] DCB contains no useful data
    [    7.212345] nouveau W[   VBIOS][0000:01:00.0] DCB contains no useful data
    [    7.212415] nouveau W[   VBIOS][0000:01:00.0] DCB contains no useful data
    [    7.212426] nouveau W[   VBIOS][0000:01:00.0] DCB contains no useful data
    [    7.212596] nouveau W[  PTIMER][0000:01:00.0] unknown input clock freq
    [    7.212615] nouveau  [     PFB][0000:01:00.0] RAM type: DDR1
    [    7.212624] nouveau  [     PFB][0000:01:00.0] RAM size: 64 MiB
    [    7.212633] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
    [    7.223307] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    [    7.223348] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
    [    7.223381] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
    [    7.223680] [TTM] Zone  kernel: Available graphics memory: 124482 kiB
    [    7.223689] [TTM] Initializing pool allocator
    [    7.224238] nouveau  [     DRM] VRAM: 63 MiB
    [    7.224255] nouveau  [     DRM] GART: 64 MiB
    [    7.224268] nouveau  [     DRM] BMP version 5.20
    [    7.224279] nouveau W[     DRM] No useful DCB data in VBIOS
    [    7.232259] nouveau W[     DRM] No useful DCB data in VBIOS
    [    7.232987] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [    7.232996] [drm] No driver support for vblank timestamp query.
    [    7.233294] nouveau  [     DRM] 0 available performance level(s)
    [    7.233309] nouveau  [     DRM] c: core 250MHz memory 400MHz
    [    7.242098] nouveau  [     DRM] MM: using M2MF for buffer copies
    [    7.297432] nouveau  [     DRM] allocated 1280x1024 fb: 0x4000, bo cb57ca00
    [    7.297689] fbcon: nouveaufb (fb0) is primary device
    [    7.430258] Console: switching to colour frame buffer device 160x64
    [    7.433976] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
    [    7.433986] nouveau 0000:01:00.0: registered panic notifier
    [    7.434019] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
    [    7.649036] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    [    7.649055] PCI: setting IRQ 5 as level-triggered
    [    7.649109] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
    [    7.972113] intel8x0_measure_ac97_clock: measured 54960 usecs (2642 samples)
    [    7.972132] intel8x0: clocking to 48000
    [    8.535005] ppdev: user-space parallel port driver
    [    9.413492] Adding 506012k swap on /dev/disk/by-uuid/d53635b5-ba1f-4efe-b1b0-8f8c280007be.  Priority:-1 extents:1 across:506012k 
    [   11.153793] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
    [   13.772152] 8139too 0000:02:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
    [   31.824043] ------------[ cut here ]------------
    [   31.824093] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x1cf/0x1e0()
    [   31.824102] NETDEV WATCHDOG: eth0 (8139too): transmit queue 0 timed out
    [   31.824109] Modules linked in: ppdev snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_page_alloc snd_timer snd soundcore nouveau video mxm_wmi drm_kms_helper ttm parport_pc intel_agp parport shpchp intel_gtt vboxvideo(O) drm
    [   31.824168] CPU: 0 PID: 659 Comm: xbmc.bin Tainted: G           O 3.10.9 #1
    [   31.824175] Hardware name:    /i815-ITE8712, BIOS 6.00 PG 05/31/2000
    [   31.824183]  cb839a84 cb839a84 cb839a4c c1699a93 cb839a74 c102c43f c190ad7c cb839aa0
    [   31.824200]  000000ff c1610d4f c1610d4f cf953000 00000000 fffefa1c cb839a8c c102c4de
    [   31.824216]  00000009 cb839a84 c190ad7c cb839aa0 cb839abc c1610d4f c1907f11 000000ff
    [   31.824234] Call Trace:
    [   31.824265]  [<c1699a93>] dump_stack+0x16/0x18
    [   31.824293]  [<c102c43f>] warn_slowpath_common+0x5f/0x80
    [   31.824305]  [<c1610d4f>] ? dev_watchdog+0x1cf/0x1e0
    [   31.824315]  [<c1610d4f>] ? dev_watchdog+0x1cf/0x1e0
    [   31.824328]  [<c102c4de>] warn_slowpath_fmt+0x2e/0x30
    [   31.824338]  [<c1610d4f>] dev_watchdog+0x1cf/0x1e0
    [   31.824351]  [<c1610b80>] ? dev_deactivate_queue.constprop.37+0x60/0x60
    [   31.824379]  [<c103888d>] call_timer_fn.isra.26+0x1d/0x80
    [   31.824391]  [<c1610b80>] ? dev_deactivate_queue.constprop.37+0x60/0x60
    [   31.824403]  [<c1038b16>] run_timer_softirq+0x136/0x1e0
    [   31.824416]  [<c1033500>] __do_softirq+0xa0/0x160
    [   31.824427]  [<c10336e5>] irq_exit+0x85/0x90
    [   31.824442]  [<c10030a6>] do_IRQ+0x46/0xb0
    [   31.824472]  [<d082e300>] ? ttm_round_pot+0x50/0x500 [ttm]
    [   31.824503]  [<c169fc33>] common_interrupt+0x33/0x38
    [   31.824522]  [<d08355cf>] ? ttm_pool_populate+0x1cf/0x560 [ttm]
    [   31.824539]  [<d082e028>] ttm_agp_tt_populate+0x18/0x150 [ttm]
    [   31.824642]  [<d105f445>] nouveau_sgdma_create_ttm+0x9d5/0x1080 [nouveau]
    [   31.824678]  [<d105ed1c>] ? nouveau_sgdma_create_ttm+0x2ac/0x1080 [nouveau]
    [   31.824694]  [<d082ec7d>] ttm_tt_bind+0x2d/0x60 [ttm]
    [   31.824710]  [<d0830c82>] ttm_bo_unmap_virtual_locked+0x4f2/0xa30 [ttm]
    [   31.824727]  [<d0831699>] ? ttm_bo_mem_space+0x159/0x320 [ttm]
    [   31.824744]  [<d083195c>] ttm_bo_move_buffer+0xfc/0x120 [ttm]
    [   31.824762]  [<d0831a18>] ttm_bo_validate+0x98/0x110 [ttm]
    [   31.824777]  [<d0831d09>] ttm_bo_init+0x279/0x360 [ttm]
    [   31.824814]  [<d105fdd6>] nouveau_bo_new+0x176/0x230 [nouveau]
    [   31.824851]  [<d105f230>] ? nouveau_sgdma_create_ttm+0x7c0/0x1080 [nouveau]
    [   31.824889]  [<d1061c6a>] nouveau_gem_new+0x5a/0x110 [nouveau]
    [   31.824926]  [<d1061db0>] nouveau_gem_ioctl_new+0x90/0x170 [nouveau]
    [   31.824963]  [<d1061d20>] ? nouveau_gem_new+0x110/0x110 [nouveau]
    [   31.825014]  [<d0842c0a>] drm_ioctl+0x49a/0x5d0 [drm]
    [   31.825055]  [<d1061d20>] ? nouveau_gem_new+0x110/0x110 [nouveau]
    [   31.825070]  [<c10c53e2>] ? handle_pte_fault+0x72/0x630
    [   31.825092]  [<c10b0a98>] ? free_pages+0x28/0x30
    [   31.825114]  [<d0842770>] ? drm_getsarea+0xc0/0xc0 [drm]
    [   31.825133]  [<c10ed462>] do_vfs_ioctl+0x72/0x590
    [   31.825163]  [<c1024540>] ? vmalloc_sync_all+0x130/0x130
    [   31.825175]  [<c10241b3>] ? __do_page_fault+0x1c3/0x420
    [   31.825205]  [<c12c4d95>] ? __percpu_counter_add+0x75/0xc0
    [   31.825222]  [<c10c97ae>] ? do_munmap+0x22e/0x2e0
    [   31.825234]  [<c10ed9c0>] SyS_ioctl+0x40/0x70
    [   31.825247]  [<c169f781>] sysenter_do_call+0x12/0x22
    [   31.825256] ---[ end trace c949682d5c51b78a ]---
    [   34.843527] 8139too 0000:02:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
    [   46.851535] 8139too 0000:02:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
    [   58.843546] 8139too 0000:02:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
    [   70.843618] 8139too 0000:02:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
    [   82.843589] 8139too 0000:02:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
    [   94.843503] 8139too 0000:02:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
    [  158.484079] usb 1-1: new full-speed USB device number 2 using uhci_hcd
    [  158.664296] usb-storage 1-1:1.0: USB Mass Storage device detected
    [  158.664974] scsi2 : usb-storage 1-1:1.0
    [  159.669027] scsi 2:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 4
    [  159.674349] sd 2:0:0:0: Attached scsi generic sg3 type 0
    [  160.766767] sd 2:0:0:0: [sdc] 1947648 512-byte logical blocks: (997 MB/951 MiB)
    [  160.778786] sd 2:0:0:0: [sdc] Write Protect is off
    [  160.778808] sd 2:0:0:0: [sdc] Mode Sense: 67 20 00 00
    [  160.790774] sd 2:0:0:0: [sdc] No Caching mode page present
    [  160.790793] sd 2:0:0:0: [sdc] Assuming drive cache: write through
    [  160.832774] sd 2:0:0:0: [sdc] No Caching mode page present
    [  160.832797] sd 2:0:0:0: [sdc] Assuming drive cache: write through
    [  160.838884]  sdc: sdc1
    [  160.884744] sd 2:0:0:0: [sdc] No Caching mode page present
    [  160.884769] sd 2:0:0:0: [sdc] Assuming drive cache: write through
    [  160.884786] sd 2:0:0:0: [sdc] Attached SCSI removable disk
    [  162.384634] EXT4-fs (sdc1): recovery complete
    [  162.390492] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    
    #7929

    tomlohave
    Keymaster

    at least, try to boot adding : “noapic”
    it should boot without the kernel problem we can see on dmesg, then copy/paste xbmc.log (located in /root/.xbmc/temp/xbmc.log )

    #7948

    zhhcui
    Member

    Thanks.

    This “noapic” dmesg log:

    
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.10.9 (thomas@servA) (gcc version 4.7.3 (GCC) ) #1 SMP Thu Oct 31 12:21:56 CET 2013
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
    [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffeffff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000fff0000-0x000000000fff2fff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x000000000fff3000-0x000000000fffffff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
    [    0.000000] SMBIOS 2.2 present.
    [    0.000000] DMI:    /i815-ITE8712, BIOS 6.00 PG 05/31/2000
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] e820: last_pfn = 0xfff0 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-C7FFF write-protect
    [    0.000000]   C8000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-through
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FF0000000 write-back
    [    0.000000]   1 disabled
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] PAT not supported by CPU.
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
    [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x0f800000-0x0fbfffff]
    [    0.000000]  [mem 0x0f800000-0x0fbfffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x08000000-0x0f7fffff]
    [    0.000000]  [mem 0x08000000-0x0f7fffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff]
    [    0.000000]  [mem 0x00100000-0x003fffff] page 4k
    [    0.000000]  [mem 0x00400000-0x07ffffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x0fc00000-0x0ffeffff]
    [    0.000000]  [mem 0x0fc00000-0x0ffeffff] page 4k
    [    0.000000] BRK [0x01a8a000, 0x01a8afff] PGTABLE
    [    0.000000] RAMDISK: [mem 0x0fea4000-0x0ffeefff]
    [    0.000000] ACPI: RSDP 000f7350 00014 (v00 GBT   )
    [    0.000000] ACPI: RSDT 0fff3000 00028 (v01 GBT    AWRDACPI 42302E31 AWRD 00000000)
    [    0.000000] ACPI: FACP 0fff3040 00074 (v01 GBT    AWRDACPI 42302E31 AWRD 00000000)
    [    0.000000] ACPI: DSDT 0fff30c0 02B0D (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
    [    0.000000] ACPI: FACS 0fff0000 00040
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 255MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 0fff0000
    [    0.000000]   low ram: 0 - 0fff0000
    [    0.000000] BRK [0x01a8b000, 0x01a8bfff] PGTABLE
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
    [    0.000000]   Normal   [mem 0x01000000-0x0ffeffff]
    [    0.000000]   HighMem  empty
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
    [    0.000000]   node   0: [mem 0x00100000-0x0ffeffff]
    [    0.000000] On node 0 totalpages: 65423
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3999 pages, LIFO batch:0
    [    0.000000]   Normal zone: 480 pages used for memmap
    [    0.000000]   Normal zone: 61424 pages, LIFO batch:15
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x4008
    [    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
    [    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
    [    0.000000] APIC: disable apic facility
    [    0.000000] APIC: switched to apic NOOP
    [    0.000000] nr_irqs_gsi: 16
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [    0.000000] e820: [mem 0x10000000-0xffafffff] available for PCI devices
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 12 pages/cpu @cfc95000 s26560 r0 d22592 u49152
    [    0.000000] pcpu-alloc: s26560 r0 d22592 u49152 alloc=12*4096
    [    0.000000] pcpu-alloc: [0] 0 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64911
    [    0.000000] Kernel command line: initrd=/boot/initrd root=UUID=c99ee078-c157-4b60-aa63-93e1358b11c9 rootfs=flat vga=792 quiet loglevel=3 rw noapic BOOT_IMAGE=/boot/vmlinuz 
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 247172k/262080k available (6786k kernel code, 14520k reserved, 3101k data, 440k init, 0k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xd07f0000 - 0xff7fe000   ( 752 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
    [    0.000000]       .init : 0xc19a8000 - 0xc1a16000   ( 440 kB)
    [    0.000000]       .data : 0xc16a095d - 0xc19a7fc0   (3101 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc16a095d   (6786 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
    [    0.000000] NR_IRQS:2304 nr_irqs:256 16
    [    0.000000] CPU 0 irqstacks, hard=cf806000 soft=cf808000
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 734.994 MHz processor
    [    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 1469.98 BogoMIPS (lpj=2939976)
    [    0.004017] pid_max: default: 32768 minimum: 301
    [    0.004144] Mount-cache hash table entries: 512
    [    0.004802] Initializing cgroup subsys devices
    [    0.004815] Initializing cgroup subsys freezer
    [    0.004822] Initializing cgroup subsys blkio
    [    0.004897] CPU serial number disabled.
    [    0.004937] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
    [    0.004937] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
    [    0.004937] tlb_flushall_shift: 6
    [    0.015856] Freeing SMP alternatives: 28k freed
    [    0.015906] ACPI: Core revision 20130328
    [    0.016299] ACPI Warning: Unsupported module-level executable opcode 0x7B at table offset 0x00AB (20130328/psloop-226)
    [    0.016321] ACPI Warning: Unsupported module-level executable opcode 0x7B at table offset 0x00B0 (20130328/psloop-226)
    [    0.021322] ACPI: All ACPI Tables successfully acquired
    [    0.021338] ACPI: setting ELCR to 0200 (from 1820)
    [    0.024280] smpboot: weird, boot CPU (#0) not listed by the BIOS
    [    0.024289] smpboot: SMP motherboard not detected
    [    0.024296] smpboot: Local APIC not detected. Using dummy APIC emulation.
    [    0.024301] smpboot: SMP disabled
    [    0.024335] Performance Events: 
    [    0.024345] no APIC, boot with the "lapic" boot parameter to force-enable it.
    [    0.024351] no hardware sampling interrupt available.
    [    0.024358] p6 PMU driver.
    [    0.024368] ... version:                0
    [    0.024374] ... bit width:              32
    [    0.024379] ... generic registers:      2
    [    0.024385] ... value mask:             00000000ffffffff
    [    0.024391] ... max period:             000000007fffffff
    [    0.024397] ... fixed-purpose events:   0
    [    0.024402] ... event mask:             0000000000000003
    [    0.024974] Brought up 1 CPUs
    [    0.024985] smpboot: Total of 1 processors activated (1469.98 BogoMIPS)
    [    0.028565] devtmpfs: initialized
    [    0.030401] PM: Registering ACPI NVS region [mem 0x0fff0000-0x0fff2fff] (12288 bytes)
    [    0.030774] regulator-dummy: no parameters
    [    0.030951] NET: Registered protocol family 16
    [    0.032476] ACPI: bus type PCI registered
    [    0.057816] PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=2
    [    0.057824] PCI: Using configuration type 1 for base access
    [    0.065663] bio: create slab <bio-0> at 0
    [    0.066005] ACPI: Added _OSI(Module Device)
    [    0.066016] ACPI: Added _OSI(Processor Device)
    [    0.066024] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.066032] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.067513] ACPI: EC: Look up EC in DSDT
    [    0.069212] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.073127] ACPI: Interpreter enabled
    [    0.073179] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [    0.073196] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568)
    [    0.073237] ACPI: (supports S0 S1 S4 S5)
    [    0.073245] ACPI: Using PIC for interrupt routing
    [    0.073324] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.073480] ACPI: No dock devices found.
    [    0.086263] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.086655] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
    [    0.086667] acpi PNP0A03:00: host bridge window [io  0x0d00-0x3fff] (ignored)
    [    0.086678] acpi PNP0A03:00: host bridge window [io  0x40f8-0x4fff] (ignored)
    [    0.086688] acpi PNP0A03:00: host bridge window [io  0x5010-0xffff] (ignored)
    [    0.086699] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.086709] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    [    0.086719] acpi PNP0A03:00: host bridge window [mem 0x10000000-0xffefffff] (ignored)
    [    0.086728] PCI: root bus 00: using default resources
    [    0.086741] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
    [    0.086975] PCI host bridge to bus 0000:00
    [    0.086991] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.087002] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
    [    0.087012] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [    0.087048] pci 0000:00:00.0: [8086:1130] type 00 class 0x060000
    [    0.087074] pci 0000:00:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref]
    [    0.087342] pci 0000:00:01.0: [8086:1131] type 01 class 0x060400
    [    0.087601] pci 0000:00:1e.0: [8086:2418] type 01 class 0x060400
    [    0.087697] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [    0.087825] pci 0000:00:1f.0: [8086:2410] type 00 class 0x060100
    [    0.087921] pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
    [    0.087935] pci 0000:00:1f.0: quirk: [io  0x4080-0x40bf] claimed by ICH4 GPIO
    [    0.088104] pci 0000:00:1f.1: [8086:2411] type 00 class 0x010180
    [    0.088168] pci 0000:00:1f.1: reg 20: [io  0xf000-0xf00f]
    [    0.088392] pci 0000:00:1f.2: [8086:2412] type 00 class 0x0c0300
    [    0.088457] pci 0000:00:1f.2: reg 20: [io  0xd000-0xd01f]
    [    0.088559] pci 0000:00:1f.2: System wakeup disabled by ACPI
    [    0.088681] pci 0000:00:1f.5: [8086:2415] type 00 class 0x040100
    [    0.088708] pci 0000:00:1f.5: reg 10: [io  0xd800-0xd8ff]
    [    0.088729] pci 0000:00:1f.5: reg 14: [io  0xdc00-0xdc3f]
    [    0.089062] pci 0000:01:00.0: [10de:0151] type 00 class 0x030000
    [    0.089092] pci 0000:01:00.0: reg 10: [mem 0xdc000000-0xdcffffff]
    [    0.089112] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref]
    [    0.089159] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [    0.089332] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.089348] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xddffffff]
    [    0.089361] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff pref]
    [    0.089488] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
    [    0.089509] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
    [    0.089520] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [    0.089543] pci_bus 0000:00: on NUMA node 0
    [    0.089578] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [    0.089590] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [    0.089910] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [    0.090176] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
    [    0.090438] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [    0.090704] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [    0.093023] acpi root: \_SB_.PCI0 notify handler is installed
    [    0.093090] Found 1 acpi root devices
    [    0.093390] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.093398] vgaarb: loaded
    [    0.093404] vgaarb: bridge control possible 0000:01:00.0
    [    0.093937] SCSI subsystem initialized
    [    0.093949] ACPI: bus type ATA registered
    [    0.094088] libata version 3.00 loaded.
    [    0.094170] ACPI: bus type USB registered
    [    0.094280] usbcore: registered new interface driver usbfs
    [    0.094325] usbcore: registered new interface driver hub
    [    0.094415] usbcore: registered new device driver usb
    [    0.094502] pps_core: LinuxPPS API ver. 1 registered
    [    0.094510] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    0.094528] PTP clock support registered
    [    0.094701] wmi: Mapper loaded
    [    0.094708] PCI: Using ACPI for IRQ routing
    [    0.094720] PCI: pci_cache_line_size set to 32 bytes
    [    0.094773] e820: reserve RAM buffer [mem 0x0fff0000-0x0fffffff]
    [    0.095785] Switching to clocksource pit
    [    0.095976] FS-Cache: Loaded
    [    0.095976] CacheFiles: Loaded
    [    0.095976] pnp: PnP ACPI init
    [    0.095976] ACPI: bus type PNP registered
    [    0.095976] system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
    [    0.095976] system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
    [    0.095976] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
    [    0.095976] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
    [    0.095976] system 00:00: [mem 0x0fff0000-0x0fffffff] could not be reserved
    [    0.095976] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.095976] system 00:00: [mem 0x00100000-0x0ffeffff] could not be reserved
    [    0.095976] system 00:00: [mem 0xffb00000-0xffb7ffff] has been reserved
    [    0.095976] system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
    [    0.095976] system 00:00: [mem 0x000e0000-0x000effff] has been reserved
    [    0.095976] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.095976] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.095976] system 00:02: [io  0x03f0-0x03f1] has been reserved
    [    0.095976] system 00:02: [io  0x04d0-0x04d1] has been reserved
    [    0.095976] system 00:02: [io  0x0290-0x029f] has been reserved
    [    0.095976] system 00:02: [io  0x0800-0x0805] has been reserved
    [    0.095976] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.095976] pnp 00:03: [dma 4]
    [    0.095976] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.095976] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.095976] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.095976] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.095976] pnp 00:07: [dma 2]
    [    0.095976] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [    0.095976] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.096938] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
    [    0.097806] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
    [    0.098215] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.098934] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active)
    [    0.099562] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
    [    0.099598] pnp: PnP ACPI: found 14 devices
    [    0.099605] ACPI: bus type PNP unregistered
    [    0.139981] Switching to clocksource acpi_pm
    [    0.140263] pci 0000:01:00.0: BAR 6: assigned [mem 0xdd000000-0xdd00ffff pref]
    [    0.140280] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.140296] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xddffffff]
    [    0.140308] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd7ffffff pref]
    [    0.140323] pci 0000:00:1e.0: PCI bridge to [bus 02]
    [    0.140368] pci 0000:00:1e.0: setting latency timer to 64
    [    0.140382] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
    [    0.140392] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [    0.140403] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xddffffff]
    [    0.140414] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref]
    [    0.140425] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
    [    0.140435] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
    [    0.140595] NET: Registered protocol family 2
    [    0.141217] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.141278] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.141332] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.141432] TCP: reno registered
    [    0.141445] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.141477] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.141675] NET: Registered protocol family 1
    [    0.142018] RPC: Registered named UNIX socket transport module.
    [    0.142028] RPC: Registered udp transport module.
    [    0.142034] RPC: Registered tcp transport module.
    [    0.142040] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.142640] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
    [    0.142650] PCI: setting IRQ 5 as level-triggered
    [    0.142836] pci 0000:01:00.0: Boot video device
    [    0.142846] PCI: CLS 0 bytes, default 32
    [    0.143022] Trying to unpack rootfs image as initramfs...
    [    0.880603] Freeing initrd memory: 1324k freed
    [    0.887201] Scanning for low memory corruption every 60 seconds
    [    0.888166] audit: initializing netlink socket (disabled)
    [    0.888213] type=2000 audit(1397769026.888:1): initialized
    [    0.888982] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.894236] VFS: Disk quotas dquot_6.5.2
    [    0.894418] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.895871] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.897261] NFS: Registering the id_resolver key type
    [    0.897312] Key type id_resolver registered
    [    0.897319] Key type id_legacy registered
    [    0.897890] fuse init (API version 7.22)
    [    0.898611] aufs 3.10-20130826
    [    0.898631] msgmni has been set to 485
    [    0.900756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.900774] io scheduler noop registered
    [    0.900781] io scheduler deadline registered (default)
    [    0.900900] io scheduler cfq registered
    [    0.901203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.901265] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.901428] vesafb: mode is 1024x768x32, linelength=4096, pages=1
    [    0.901436] vesafb: protected mode interface info at c000:bd00
    [    0.901445] vesafb: pmi: set display start = c00cbd45, set palette = c00cbdca
    [    0.901451] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
    [    0.901490] vesafb: scrolling: redraw
    [    0.901502] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [    0.902982] vesafb: framebuffer at 0xd0000000, mapped to 0xd0880000, using 6144k, total 65536k
    [    0.957581] Console: switching to colour frame buffer device 128x48
    [    1.011753] fb0: VESA VGA frame buffer device
    [    1.011958] intel_idle: does not run on family 6 model 8
    [    1.012246] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    1.012263] ACPI: Power Button [PWRB]
    [    1.012436] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
    [    1.012450] ACPI: Sleep Button [SLPB]
    [    1.012598] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [    1.012609] ACPI: Power Button [PWRF]
    [    1.012732] ACPI: Fan [FAN] (on)
    [    1.012836] tsc: Marking TSC unstable due to TSC halts in idle
    [    1.012853] ACPI: acpi_idle registered with cpuidle
    [    1.018496] thermal LNXTHERM:00: registered as thermal_zone0
    [    1.018508] ACPI: Thermal Zone [THRM] (27 C)
    [    1.023393] Linux agpgart interface v0.103
    [    1.027847] brd: module loaded
    [    1.030324] loop: module loaded
    [    1.030994] ata_piix 0000:00:1f.1: version 2.13
    [    1.031157] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    1.032163] scsi0 : ata_piix
    [    1.032427] scsi1 : ata_piix
    [    1.032560] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    1.032570] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    1.035775] libphy: Fixed MDIO Bus: probed
    [    1.036933] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
    [    1.037023] Atheros(R) L2 Ethernet Driver - version 2.2.3
    [    1.037030] Copyright (c) 2007 Atheros Corporation.
    [    1.037264] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
    [    1.037458] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
    [    1.037509] v1.01-e (2.4 port) Sep-11-2006  Donald Becker <becker@scyld.com>
    [    1.037509]   http://www.scyld.com/network/drivers.html
    [    1.037705] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
    [    1.037868] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [    1.037875] e100: Copyright(c) 1999-2006 Intel Corporation
    [    1.037930] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [    1.037936] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [    1.037996] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k
    [    1.038003] igb: Copyright (c) 2007-2013 Intel Corporation.
    [    1.038066] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
    [    1.038073] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
    [    1.038163] jme: JMicron JMC2XX ethernet driver version 1.0.8
    [    1.038261] sky2: driver version 1.30
    [    1.038436] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
    [    1.038521] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
    [    1.039061] tlan: ThunderLAN driver v1.17
    [    1.039110] tlan: 0 devices installed, PCI: 0  EISA: 0
    [    1.039145] via_rhine: Broken BIOS detected, avoid_D3 enabled
    [    1.039462] usbcore: registered new interface driver hwa-rc
    [    1.039726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.039734] ehci-pci: EHCI PCI platform driver
    [    1.039787] ehci-platform: EHCI generic platform driver
    [    1.039879] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.039942] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.040305] uhci_hcd 0000:00:1f.2: setting latency timer to 64
    [    1.040319] uhci_hcd 0000:00:1f.2: UHCI Host Controller
    [    1.040464] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
    [    1.040526] uhci_hcd 0000:00:1f.2: irq 5, io base 0x0000d000
    [    1.041012] hub 1-0:1.0: USB hub found
    [    1.041033] hub 1-0:1.0: 2 ports detected
    [    1.041555] usbcore: registered new interface driver hwa-hc
    [    1.041775] usbcore: registered new interface driver wusb-cbaf
    [    1.041838] usbcore: registered new interface driver cdc_acm
    [    1.041845] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [    1.041942] usbcore: registered new interface driver usb-storage
    [    1.041978] usbcore: registered new interface driver ums-alauda
    [    1.042013] usbcore: registered new interface driver ums-cypress
    [    1.042049] usbcore: registered new interface driver ums-datafab
    [    1.042084] usbcore: registered new interface driver ums-freecom
    [    1.042119] usbcore: registered new interface driver ums-isd200
    [    1.042154] usbcore: registered new interface driver ums-jumpshot
    [    1.042189] usbcore: registered new interface driver ums-karma
    [    1.042224] usbcore: registered new interface driver ums-onetouch
    [    1.042260] usbcore: registered new interface driver ums-sddr09
    [    1.042302] usbcore: registered new interface driver ums-sddr55
    [    1.042339] usbcore: registered new interface driver ums-usbat
    [    1.042505] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    1.042513] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.043516] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.043890] mousedev: PS/2 mouse device common for all mice
    [    1.044595] rtc_cmos 00:04: RTC can wake from S4
    [    1.044877] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [    1.044918] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram
    [    1.045112] cpuidle: using governor ladder
    [    1.045189] cpuidle: using governor menu
    [    1.045217] sdhci: Secure Digital Host Controller Interface driver
    [    1.045223] sdhci: Copyright(c) Pierre Ossman
    [    1.045279] wbsd: Winbond W83L51xD SD/MMC card interface driver
    [    1.045285] wbsd: Copyright(c) Pierre Ossman
    [    1.045441] usbcore: registered new interface driver ushc
    [    1.045447] sdhci-pltfm: SDHCI platform and OF driver helper
    [    1.045816] hidraw: raw HID events driver (C) Jiri Kosina
    [    1.046258] usbcore: registered new interface driver usbhid
    [    1.046265] usbhid: USB HID core driver
    [    1.046500] TCP: cubic registered
    [    1.046511] NET: Registered protocol family 17
    [    1.046618] Key type dns_resolver registered
    [    1.047259] Using IPI No-Shortcut mode
    [    1.047641] registered taskstats version 1
    [    1.048247] rtc_cmos 00:04: setting system clock to 2014-04-17 21:10:27 UTC (1397769027)
    [    1.048311] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.048318] EDD information not available.
    [    1.074073] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [    1.192735] ata2.00: ATAPI: E-IDE CD-ROM Max 50X, Ver6.40G, max UDMA/33
    [    1.200220] ata2.00: configured for UDMA/33
    [    1.208843] ata1.00: ATA-5: FUJITSU MPF3204AT, 0031, max UDMA/66
    [    1.208854] ata1.00: 40031712 sectors, multi 16: LBA 
    [    1.208874] ata1.01: ATA-4: ST320413A, 3.53, max UDMA/100
    [    1.208883] ata1.01: 39102336 sectors, multi 16: LBA 
    [    1.224539] ata1.00: configured for UDMA/66
    [    1.240203] ata1.01: configured for UDMA/66
    [    1.240602] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MPF3204A 0031 PQ: 0 ANSI: 5
    [    1.241287] sd 0:0:0:0: [sda] 40031712 512-byte logical blocks: (20.4 GB/19.0 GiB)
    [    1.241497] sd 0:0:0:0: [sda] Write Protect is off
    [    1.241510] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.241602] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.242217] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.776679]  sda: sda1
    [    1.776994] scsi 0:0:1:0: Direct-Access     ATA      ST320413A        3.53 PQ: 0 ANSI: 5
    [    1.777648] sd 0:0:1:0: [sdb] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
    [    1.778191] sd 0:0:1:0: [sdb] Write Protect is off
    [    1.778206] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    [    1.778298] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.778872] sd 0:0:1:0: Attached scsi generic sg1 type 0
    [    1.779736] scsi 1:0:0:0: CD-ROM            E-IDE    CD-ROM Max 50X   6.40 PQ: 0 ANSI: 5
    [    1.780325] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.781635] sr0: scsi3-mmc drive: 1x/50x cd/rw xa/form2 cdda tray
    [    1.781650] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.781990] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.782304] sr 1:0:0:0: Attached scsi generic sg2 type 5
    [    1.796701]  sdb: sdb1 sdb2
    [    1.797660] sd 0:0:1:0: [sdb] Attached SCSI disk
    [    1.797749] Freeing unused kernel memory: 440k freed
    [    1.799380] Write protecting the kernel text: 6788k
    [    1.799563] Write protecting the kernel read-only data: 2724k
    [    2.450566] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
    [    2.451401] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
    [    2.496090] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    3.685276] systemd[1]: Failed to insert module 'ipv6'
    [    5.374074] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [    5.462852] [drm] Initialized drm 1.1.0 20060810
    [    5.878007] systemd-udevd[133]: starting version 206
    [    6.570548] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    6.579321] agpgart-intel 0000:00:00.0: Intel i815 Chipset
    [    6.584272] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xd8000000
    [    6.591119] parport_pc 00:0a: reported by Plug and Play ACPI
    [    6.591177] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [    7.143093] checking generic (d0000000 4000000) vs hw (d0000000 8000000)
    [    7.143111] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
    [    7.143192] Console: switching to colour dummy device 80x25
    [    7.148218] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    [    7.148234] PCI: setting IRQ 11 as level-triggered
    [    7.149028] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x015100a4
    [    7.149040] nouveau  [  DEVICE][0000:01:00.0] Chipset: NV15 (NV15)
    [    7.149049] nouveau  [  DEVICE][0000:01:00.0] Family : NV10
    [    7.154219] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
    [    7.185380] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
    [    7.185392] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
    [    7.185403] nouveau  [   VBIOS][0000:01:00.0] BMP version 5.14
    [    7.185785] nouveau  [   VBIOS][0000:01:00.0] version 03.15.01.04.00
    [    7.192151] nouveau W[   VBIOS][0000:01:00.0] DCB contains no useful data
    [    7.192298] nouveau W[   VBIOS][0000:01:00.0] DCB contains no useful data
    [    7.192398] nouveau W[   VBIOS][0000:01:00.0] DCB contains no useful data
    [    7.192409] nouveau W[   VBIOS][0000:01:00.0] DCB contains no useful data
    [    7.192554] nouveau W[  PTIMER][0000:01:00.0] unknown input clock freq
    [    7.192571] nouveau  [     PFB][0000:01:00.0] RAM type: DDR1
    [    7.192580] nouveau  [     PFB][0000:01:00.0] RAM size: 64 MiB
    [    7.192589] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
    [    7.204157] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    [    7.204194] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
    [    7.204225] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
    [    7.204415] [TTM] Zone  kernel: Available graphics memory: 124482 kiB
    [    7.204423] [TTM] Initializing pool allocator
    [    7.204768] nouveau  [     DRM] VRAM: 63 MiB
    [    7.204782] nouveau  [     DRM] GART: 64 MiB
    [    7.204795] nouveau  [     DRM] BMP version 5.20
    [    7.204805] nouveau W[     DRM] No useful DCB data in VBIOS
    [    7.212260] nouveau W[     DRM] No useful DCB data in VBIOS
    [    7.212928] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [    7.212936] [drm] No driver support for vblank timestamp query.
    [    7.213194] nouveau  [     DRM] 0 available performance level(s)
    [    7.213209] nouveau  [     DRM] c: core 250MHz memory 400MHz
    [    7.226047] nouveau  [     DRM] MM: using M2MF for buffer copies
    [    7.277322] nouveau  [     DRM] allocated 1280x1024 fb: 0x4000, bo cb129600
    [    7.277541] fbcon: nouveaufb (fb0) is primary device
    [    7.410676] Console: switching to colour frame buffer device 160x64
    [    7.414334] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
    [    7.414344] nouveau 0000:01:00.0: registered panic notifier
    [    7.414376] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
    [    7.501761] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
    [    7.501777] PCI: setting IRQ 12 as level-triggered
    [    7.501824] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
    [    7.852241] intel8x0_measure_ac97_clock: measured 83442 usecs (4008 samples)
    [    7.852257] intel8x0: clocking to 48000
    [    8.400848] ppdev: user-space parallel port driver
    [    9.144353] Adding 506012k swap on /dev/disk/by-uuid/d53635b5-ba1f-4efe-b1b0-8f8c280007be.  Priority:-1 extents:1 across:506012k 
    [   10.953598] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
    [  111.268076] usb 1-1: new full-speed USB device number 2 using uhci_hcd
    [  111.449232] usb-storage 1-1:1.0: USB Mass Storage device detected
    [  111.449761] scsi2 : usb-storage 1-1:1.0
    [  112.453020] scsi 2:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 4
    [  112.457819] sd 2:0:0:0: Attached scsi generic sg3 type 0
    [  113.954699] sd 2:0:0:0: [sdc] 1947648 512-byte logical blocks: (997 MB/951 MiB)
    [  113.966701] sd 2:0:0:0: [sdc] Write Protect is off
    [  113.966722] sd 2:0:0:0: [sdc] Mode Sense: 67 20 00 00
    [  113.978695] sd 2:0:0:0: [sdc] No Caching mode page present
    [  113.978712] sd 2:0:0:0: [sdc] Assuming drive cache: write through
    [  114.020701] sd 2:0:0:0: [sdc] No Caching mode page present
    [  114.020722] sd 2:0:0:0: [sdc] Assuming drive cache: write through
    [  114.029205]  sdc: sdc1
    [  114.072679] sd 2:0:0:0: [sdc] No Caching mode page present
    [  114.072700] sd 2:0:0:0: [sdc] Assuming drive cache: write through
    [  114.072716] sd 2:0:0:0: [sdc] Attached SCSI removable disk
    [  115.586582] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    

    This is xbmc.log:

    
    21:12:02 T:3046356736  NOTICE: -----------------------------------------------------------------------
    21:12:02 T:3046356736  NOTICE: Starting XBMC (12.2 Git:Unknown), Platform: Linux (GeeXboX 3.1, 3.10.9 i686). Built on Oct 31 2013
    21:12:02 T:3046356736  NOTICE: special://xbmc/ is mapped to: /usr/share/xbmc
    21:12:02 T:3046356736  NOTICE: special://xbmcbin/ is mapped to: /usr/lib/xbmc
    21:12:02 T:3046356736  NOTICE: special://masterprofile/ is mapped to: /root/.xbmc/userdata
    21:12:02 T:3046356736  NOTICE: special://home/ is mapped to: /root/.xbmc
    21:12:02 T:3046356736  NOTICE: special://temp/ is mapped to: /root/.xbmc/temp
    21:12:02 T:3046356736  NOTICE: The executable running is: /usr/lib/xbmc/xbmc.bin
    21:12:02 T:3046356736  NOTICE: Local hostname: geexbox
    21:12:02 T:3046356736  NOTICE: Log File is located: /root/.xbmc/temp/xbmc.log
    21:12:02 T:3046356736  NOTICE: -----------------------------------------------------------------------
    21:12:02 T:3046356736   ERROR: CAESinkOSS::EnumerateDevicesEx - Failed to open mixer: /dev/mixer
    21:12:02 T:3046356736  NOTICE: Found 1 Lists of Devices
    21:12:02 T:3046356736  NOTICE: Enumerated ALSA devices:
    21:12:02 T:3046356736  NOTICE:     Device 1
    21:12:02 T:3046356736  NOTICE:         m_deviceName      : @
    21:12:02 T:3046356736  NOTICE:         m_displayName     : Default (Intel 82801AA-ICH Intel 82801AA-ICH)
    21:12:02 T:3046356736  NOTICE:         m_displayNameExtra:
    21:12:02 T:3046356736  NOTICE:         m_deviceType      : AE_DEVTYPE_PCM
    21:12:02 T:3046356736  NOTICE:         m_channels        : FL,FR
    21:12:02 T:3046356736  NOTICE:         m_sampleRates     : 48000
    21:12:02 T:3046356736  NOTICE:         m_dataFormats     : AE_FMT_S16NE,AE_FMT_S16LE
    21:12:02 T:3046356736  NOTICE:     Device 2
    21:12:02 T:3046356736  NOTICE:         m_deviceName      : @:CARD=I82801AAICH,DEV=0
    21:12:02 T:3046356736  NOTICE:         m_displayName     : Intel 82801AA-ICH
    21:12:02 T:3046356736  NOTICE:         m_displayNameExtra: Intel 82801AA-ICH
    21:12:02 T:3046356736  NOTICE:         m_deviceType      : AE_DEVTYPE_PCM
    21:12:02 T:3046356736  NOTICE:         m_channels        : FL,FR
    21:12:02 T:3046356736  NOTICE:         m_sampleRates     : 48000
    21:12:02 T:3046356736  NOTICE:         m_dataFormats     : AE_FMT_S16NE,AE_FMT_S16LE
    21:12:02 T:3046356736  NOTICE: load settings...
    21:12:02 T:3046356736  NOTICE: special://profile/ is mapped to: special://masterprofile/
    21:12:02 T:3046356736  NOTICE: loading special://masterprofile/guisettings.xml
    21:12:02 T:3046356736  NOTICE: Getting hardware information now...
    21:12:02 T:3046356736  NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml.
    21:12:02 T:3046356736  NOTICE: Loaded playercorefactory configuration
    21:12:02 T:3046356736  NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.
    21:12:02 T:3046356736  NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.
    21:12:02 T:3046356736  NOTICE: No settings file to load (special://xbmc/system/advancedsettings.xml)
    21:12:02 T:3046356736  NOTICE: Loaded settings file from special://profile/advancedsettings.xml
    21:12:02 T:3046356736  NOTICE: Contents of special://profile/advancedsettings.xml are...
                                                <advancedsettings>
                                                  <useddsfanart>true</useddsfanart>
                                                  <showexitbutton>false</showexitbutton>
                                                  <cputempcommand>sed -e &apos;s/\([0-9]*\)[0-9]\{3\}.*/\1 C/&apos; /sys/class/thermal/thermal_zone0/temp</cputempcommand>
                                                  <samba>
                                                    <clienttimeout>10</clienttimeout>
                                                  </samba>
                                                  <fullscreen>true</fullscreen>
                                                </advancedsettings>
    21:12:02 T:3046356736  NOTICE: Getting hardware information now...
    21:12:02 T:3046356736  NOTICE: Default DVD Player: dvdplayer
    21:12:02 T:3046356736  NOTICE: Default Video Player: dvdplayer
    21:12:02 T:3046356736  NOTICE: Default Audio Player: paplayer
    21:12:02 T:3046356736  NOTICE: Disabled debug logging due to GUI setting. Level 0.
    21:12:02 T:3046356736  NOTICE: Log level changed to 0
    21:12:02 T:3046356736  NOTICE: Loading media sources from special://masterprofile/sources.xml
    21:12:02 T:3044064064  NOTICE: Thread CSoftAE start, auto delete: false
    21:12:02 T:3046356736  NOTICE: Running database version Addons15
    21:12:03 T:3033815872  NOTICE: Thread XBMC Peripherals start, auto delete: false
    21:12:03 T:3046356736  NOTICE: Previous line repeats 1 times.
    21:12:03 T:3046356736  NOTICE: Setup SDL
    21:12:03 T:3046356736  NOTICE: Checking resolution 16
    21:12:03 T:3046356736  NOTICE: Using visual 0xf2
    21:12:04 T:3046356736  NOTICE: GL_VENDOR = Nouveau
    21:12:04 T:3046356736  NOTICE: GL_RENDERER = Mesa DRI nv15
    21:12:04 T:3046356736  NOTICE: GL_VERSION = 1.2 Mesa 9.2.2
    21:12:04 T:3046356736  NOTICE: GL_SHADING_LANGUAGE_VERSION = 1.20
    21:12:04 T:3046356736  NOTICE: GL_EXTENSIONS = GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_multitexture GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_env_combine4 GL_SUN_multi_draw_arrays GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_env_combine GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_NV_fog_distance GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_shader_objects GL_ATI_draw_buffers GL_EXT_stencil_wrap GL_ARB_shading_language_100 GL_ARB_vertex_buffer_object GL_OES_read_format GL_ARB_texture_rectangle GL_EXT_texture_rectangle GL_EXT_framebuffer_blit GL_EXT_packed_depth_stencil GL_ARB_vertex_array_object GL_ARB_copy_buffer GL_ARB_debug_output GL_ARB_sampler_objects GL_ARB_get_program_binary GL_ARB_robustness GL_ARB_texture_storage GL_ARB_invalidate_subdata
    21:12:04 T:3046356736   ERROR: GLX: Same window as before, refreshing context
    21:12:04 T:3046356736   ERROR: ResetRenderSystem() GL_MAX_TEXTURE_IMAGE_UNITS_ARB returned error 1280
    

    It seems that 1st error is about sound system, and 2nd error is about display system.

    #7949

    tomlohave
    Keymaster

    oh, you use the 3.1 version , right ?
    try a devel iso, just to see
    about sound & video errors, got the same, but it works here (using another video card)
    To be honest, a PIII is not enough for xbmc and 256 MB too. you need at least 512 MB
    How did you boot , from usb device ?

    #7952

    zhhcui
    Member

    oh, you use the 3.1 version , right ?

    Yes, 3.1 i386 version.

    To be honest, a PIII is not enough for xbmc and 256 MB too. you need at least 512 MB

    I made a 512 swap partition.

    How did you boot , from usb device ?

    The motherboard doesn’t support usb boot. So I burn a CD and install GeeXBox to hdd. This is the ONLY system the computer has. This computer has a Windows 2000 before.

    I google “ResetRenderSystem() GL_MAX_TEXTURE_IMAGE_UNITS_ARB returned error 1280” but found no answer.

    #7984

    zhhcui
    Member

    I found this thread . Edit /usr/share/applications/xbmc.desktop file. Exec line should be changed to:

    Exec=sh -c “MESA_GL_VERSION_OVERRIDE=3.0 xbmc”

    My question is, since XBMC in GeeXBox is started automatically, which file should I edit? How does XBMC start? Is there a script?

    Another question is, my USB storage is parted and made a RAID5. It seems that GeeXBox does NOT recognize it. Why?

    Output of “dmesg | tail -n20” and “fdisk -l /dev/sdc” command:

    [ 8.327406] ppdev: user-space parallel port driver
    [ 9.144393] Adding 506012k swap on /dev/disk/by-uuid/d53635b5-ba1f-4efe-b1b0-8f8c280007be. Priority:-1 extents:1 across:506012k
    [ 11.026034] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
    [ 356.428075] usb 1-1: new full-speed USB device number 2 using uhci_hcd
    [ 356.612249] usb-storage 1-1:1.0: USB Mass Storage device detected
    [ 356.612773] scsi2 : usb-storage 1-1:1.0
    [ 357.617004] scsi 2:0:0:0: Direct-Access ST380021 A PQ: 0 ANSI: 2 CCS
    [ 357.622126] sd 2:0:0:0: Attached scsi generic sg3 type 0
    [ 357.628986] sd 2:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 357.632011] sd 2:0:0:0: [sdc] Write Protect is off
    [ 357.632129] sd 2:0:0:0: [sdc] Mode Sense: 00 38 00 00
    [ 357.634995] sd 2:0:0:0: [sdc] Asking for cache data failed
    [ 357.635014] sd 2:0:0:0: [sdc] Assuming drive cache: write through
    [ 357.645953] sd 2:0:0:0: [sdc] Asking for cache data failed
    [ 357.645975] sd 2:0:0:0: [sdc] Assuming drive cache: write through
    [ 357.778922] sdc: sdc1 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 >
    [ 357.797933] sd 2:0:0:0: [sdc] Asking for cache data failed
    [ 357.797955] sd 2:0:0:0: [sdc] Assuming drive cache: write through
    [ 357.797971] sd 2:0:0:0: [sdc] Attached SCSI disk
    [ 359.726074] EXT4-fs (sdc1): unable to read superblock

    Disk /dev/sdc: 80.0 GB, 80026361856 bytes
    81 heads, 63 sectors/track, 30629 cylinders
    Units = cylinders of 5103 * 512 = 2612736 bytes

    Device Boot Start End Blocks Id System
    /dev/sdc1 1 30630 78149720 5 Extended
    /dev/sdc5 1 3446 8789062+ 83 Linux
    /dev/sdc6 3446 6891 8789062+ 83 Linux
    /dev/sdc7 6891 10336 8789062+ 83 Linux
    /dev/sdc8 16850 20294 8789062+ 83 Linux
    /dev/sdc9 20295 23739 8789062+ 83 Linux
    /dev/sdc10 23740 27184 8789062+ 83 Linux
    /dev/sdc11 27185 30629 8789062+ 83 Linux

    #7985

    zhhcui
    Member

    I found this thread

    I mean URL: http://forum.xbmc.org/showthread.php?tid=150605

    #7986

    tomlohave
    Keymaster

    for xbmc, the script that starts it is located in /usr/bin/, called runxbmc.
    About your sdc disk, not sure that we support raid5 (at least /me have never tested that)

    #7993

    zhhcui
    Member

    Problem solved.

    Edit /usr/bin/runxbmc file, change line 9:
    /usr/lib/xbmc/xbmc.bin $@
    to
    sh -c "MESA_GL_VERSION_OVERRIDE=3.0 /usr/lib/xbmc/xbmc.bin $@"
    Then reboot. Everything is OK.

    GUI is smooth when operating by keyboard. When using mouse, GUI isn’t smooth any more. Just as tomlohave says, Pentium III 733MHz is too old. In XBMC–>System Info, CPU usage is between 95%~100%.

    Playing music, picture and video works fine.

    RAID0, RAID1, and RAID5 doesn’t work.

    In XBMC–>System Info, total RAM is 256MB. I swap on a 512MB partition. It seems that XBMC doesn’t recognize it.

    #8240

    rustynail73
    Member

    Hi all,

    Problem solved.

    Edit /usr/bin/runxbmc file, change line 9:
    /usr/lib/xbmc/xbmc.bin $@
    to
    sh -c “MESA_GL_VERSION_OVERRIDE=3.0 /usr/lib/xbmc/xbmc.bin $@”
    Then reboot. Everything is OK.

    I had the same trouble and solved like above…
    … but started xbmc the frame rate is too low (about 3.0 fps)
    cpu and memory use is less than 30%
    cpu Transmeta Crusoe
    Ram 512 MB
    Grafic card embedded ATI RADEON 7000 VE
    Geexbox 3.1 HD install on 80Gb

    Can anyone give me suggestions?
    My logs..
    Tanks
    Xorg.0.log:

    [1719675.755] 
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [1719675.756] X Protocol Version 11, Revision 0
    [1719675.785] Build Operating System: Linux 3.11.0-12-generic x86_64 OpenBricks
    [1719675.846] Current Operating System: Linux geexbox 3.10.9 #1 SMP Thu Oct 31 12:21:56 CET 2013 i586
    [1719675.848] Kernel command line: initrd=/boot/initrd root=UUID=9e788201-4f74-498b-a382-2639c4395fe2 rootfs=flat vga=795 quiet loglevel=3 rw BOOT_IMAGE=/boot/vmlinuz 
    [1719675.888] Build Date: 31 October 2013  03:46:03PM
    [1719676.002]  
    [1719676.004] Current version of pixman: 0.28.0
    [1719676.005] 	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    [1719676.030] Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [1719676.101] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun  4 10:50:14 2014
    [1719676.531] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [1719676.532] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [1719676.941] (==) No Layout section.  Using the first Screen section.
    [1719676.998] (==) No screen section available. Using defaults.
    [1719676.999] (**) |-->Screen "Default Screen Section" (0)
    [1719676.999] (**) |   |-->Monitor "<default monitor>"
    [1719677.145] (==) No monitor specified for screen "Default Screen Section".
    	Using a default monitor configuration.
    [1719677.278] (==) Automatically adding devices
    [1719677.279] (==) Automatically enabling devices
    [1719677.279] (==) Automatically adding GPU devices
    [1719677.354] (==) FontPath set to:
    	/usr/share/X11/fonts/misc,
    	built-ins
    [1719677.355] (==) ModulePath set to "/usr/lib/xorg/modules"
    [1719677.355] (II) The server relies on udev to provide the list of input devices.
    	If no devices become available, reconfigure udev or disable AutoAddDevices.
    [1719677.426] (II) Loader magic: 0x827faa0
    [1719677.427] (II) Module ABI versions:
    [1719677.519] 	X.Org ANSI C Emulation: 0.4
    [1719677.519] 	X.Org Video Driver: 14.1
    [1719677.582] 	X.Org XInput driver : 19.1
    [1719677.582] 	X.Org Server Extension : 7.0
    [1719677.788] (II) config/udev: Adding drm device (/dev/dri/card0)
    [1719678.371] (--) PCI:*(0:0:13:0) 1002:5159:1002:5159 rev 0, Mem @ 0xe0000000/134217728, 0xe8120000/65536, I/O @ 0x0000e200/256, BIOS @ 0x????????/131072
    [1719678.372] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [1719678.388] Initializing built-in extension Generic Event Extension
    [1719678.389] Initializing built-in extension SHAPE
    [1719678.389] Initializing built-in extension MIT-SHM
    [1719678.400] Initializing built-in extension XInputExtension
    [1719678.401] Initializing built-in extension XTEST
    [1719678.417] Initializing built-in extension BIG-REQUESTS
    [1719678.443] Initializing built-in extension SYNC
    [1719678.444] Initializing built-in extension XKEYBOARD
    [1719678.444] Initializing built-in extension XC-MISC
    [1719678.444] Initializing built-in extension SECURITY
    [1719678.445] Initializing built-in extension XINERAMA
    [1719678.468] Initializing built-in extension XFIXES
    [1719678.481] Initializing built-in extension RENDER
    [1719678.518] Initializing built-in extension RANDR
    [1719678.519] Initializing built-in extension COMPOSITE
    [1719678.519] Initializing built-in extension DAMAGE
    [1719678.520] Initializing built-in extension MIT-SCREEN-SAVER
    [1719678.520] Initializing built-in extension DOUBLE-BUFFER
    [1719678.520] Initializing built-in extension RECORD
    [1719678.520] Initializing built-in extension DPMS
    [1719678.521] Initializing built-in extension X-Resource
    [1719678.521] Initializing built-in extension XVideo
    [1719678.521] Initializing built-in extension XVideo-MotionCompensation
    [1719678.521] Initializing built-in extension XFree86-VidModeExtension
    [1719678.521] Initializing built-in extension XFree86-DGA
    [1719678.521] Initializing built-in extension XFree86-DRI
    [1719678.546] Initializing built-in extension DRI2
    [1719678.546] (II) LoadModule: "glx"
    [1719678.826] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [1719678.890] (II) Module glx: vendor="X.Org Foundation"
    [1719678.890] 	compiled for 1.14.1, module version = 1.0.0
    [1719678.891] 	ABI class: X.Org Server Extension, version 7.0
    [1719678.891] (==) AIGLX enabled
    [1719678.910] Loading extension GLX
    [1719678.910] (==) Matched ati as autoconfigured driver 0
    [1719678.911] (==) Matched ati as autoconfigured driver 1
    [1719678.911] (==) Matched vesa as autoconfigured driver 2
    [1719678.911] (==) Matched modesetting as autoconfigured driver 3
    [1719678.911] (==) Matched fbdev as autoconfigured driver 4
    [1719678.911] (==) Assigned the driver to the xf86ConfigLayout
    [1719678.912] (II) LoadModule: "ati"
    [1719679.023] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [1719679.055] (II) Module ati: vendor="X.Org Foundation"
    [1719679.055] 	compiled for 1.14.1, module version = 7.2.0
    [1719679.056] 	Module class: X.Org Video Driver
    [1719679.056] 	ABI class: X.Org Video Driver, version 14.1
    [1719679.057] (II) LoadModule: "radeon"
    [1719679.156] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [1719679.259] (II) Module radeon: vendor="X.Org Foundation"
    [1719679.259] 	compiled for 1.14.1, module version = 7.2.0
    [1719679.259] 	Module class: X.Org Video Driver
    [1719679.260] 	ABI class: X.Org Video Driver, version 14.1
    [1719679.260] (II) LoadModule: "vesa"
    [1719679.289] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [1719679.327] (II) Module vesa: vendor="X.Org Foundation"
    [1719679.327] 	compiled for 1.14.1, module version = 2.3.2
    [1719679.327] 	Module class: X.Org Video Driver
    [1719679.327] 	ABI class: X.Org Video Driver, version 14.1
    [1719679.327] (II) LoadModule: "modesetting"
    [1719679.402] (WW) Warning, couldn't open module modesetting
    [1719679.403] (II) UnloadModule: "modesetting"
    [1719679.403] (II) Unloading modesetting
    [1719679.403] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [1719679.403] (II) LoadModule: "fbdev"
    [1719679.444] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [1719679.491] (II) Module fbdev: vendor="X.Org Foundation"
    [1719679.496] 	compiled for 1.14.1, module version = 0.4.3
    [1719679.496] 	Module class: X.Org Video Driver
    [1719679.496] 	ABI class: X.Org Video Driver, version 14.1
    [1719679.497] (II) RADEON: Driver for ATI Radeon chipsets:
    	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    	ATI Radeon X600 (RV380) 3E50 (PCIE),
    	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    	ATI Radeon IGP330M/340M/350M (U2) 4337,
    	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    	ATI Radeon X800PRO (R420) JI (AGP),
    	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    	ATI Radeon Mobility 9800 (M18) JN (AGP),
    	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    	ATI Radeon Mobility M7 LW (AGP),
    	ATI Mobility FireGL 7800 M7 LX (AGP),
    	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    	ATI FireGL Mobility 9000 (M9) Ld (AGP),
    	ATI Radeon Mobility 9000 (M9) Lf (AGP),
    	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    	ATI Radeon Mobility 9600 (M10) NQ (AGP),
    	ATI Radeon Mobility 9600 (M11) NR (AGP),
    	ATI Radeon Mobility 9600 (M10) NS (AGP),
    	ATI FireGL Mobility T2 (M10) NT (AGP),
    	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    	ATI Radeon X800PRO (R423) UI (PCIE),
    	ATI Radeon X800LE (R423) UJ (PCIE),
    	ATI Radeon X800SE (R423) UK (PCIE),
    	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    	ATI FireGL unknown (R423) UR (PCIE),
    	ATI FireGL unknown (R423) UT (PCIE),
    	ATI Mobility FireGL V5000 (M26) (PCIE),
    	ATI Mobility FireGL V5000 (M26) (PCIE),
    	ATI Mobility Radeon X700 XL (M26) (PCIE),
    	ATI Mobility Radeon X700 (M26) (PCIE),
    	ATI Mobility Radeon X700 (M26) (PCIE),
    	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    	ATI Radeon Mobility 9100 IGP (U3) 5835,
    	ATI Radeon XPRESS 200 5954 (PCIE),
    	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    	ATI Radeon XPRESS 200M 5975 (PCIE),
    	ATI Radeon XPRESS 200 5A41 (PCIE),
    	ATI Radeon XPRESS 200M 5A42 (PCIE),
    	ATI Radeon XPRESS 200 5A61 (PCIE),
    	ATI Radeon XPRESS 200M 5A62 (PCIE),
    	ATI Radeon X300 (RV370) 5B60 (PCIE),
    	ATI Radeon X600 (RV370) 5B62 (PCIE),
    	ATI Radeon X550 (RV370) 5B63 (PCIE),
    	ATI FireGL V3100 (RV370) 5B64 (PCIE),
    	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    	ATI Mobility Radeon X800 XT (M28) (PCIE),
    	ATI Mobility FireGL V5100 (M28) (PCIE),
    	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    	ATI Radeon X850 XT PE (R480) (PCIE),
    	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    	ATI Radeon X850 XT (R480) (PCIE),
    	ATI Radeon X800XT (R423) 5D57 (PCIE),
    	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    	ATI Radeon X700 PRO (RV410) (PCIE),
    	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    	ATI Mobility Radeon HD 3850 X2, ATI RV670,
    	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    	ATI FireGL V3600, ATI Radeon HD 2600 LE,
    	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    	SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    	AMD Radeon HD 6300 Series Graphics,
    	AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    	ATI FirePro (FireGL) Graphics Adapter,
    	ATI FirePro (FireGL) Graphics Adapter,
    	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    	AMD Firestream 9350, ATI Radeon HD 5800 Series,
    	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    	ATI Mobility Radeon HD 5800 Series,
    	ATI FirePro (FireGL) Graphics Adapter,
    	ATI FirePro (FireGL) Graphics Adapter,
    	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    	ATI Mobility Radeon HD 5000 Series,
    	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    	ATI FirePro (FireGL) Graphics Adapter,
    	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    	ATI Mobility Radeon HD 5000 Series,
    	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    	ATI Mobility Radeon Graphics, CEDAR,
    	ATI FirePro (FireGL) Graphics Adapter,
    	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    	BARTS, BARTS, Mobility Radeon HD 6000 Series,
    	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    	TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    	TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    	VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    	OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
    	HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    	BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
    	KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    	KABINI, KABINI, KABINI
    [1719679.796] (II) VESA: driver for VESA chipsets: vesa
    [1719679.796] (II) FBDEV: driver for framebuffer: fbdev
    [1719679.796] (++) using VT number 4
    
    [1719679.796] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
    [1719679.797] (WW) xf86OpenConsole: setsid failed: Operation not permitted
    [1719679.881] (II) [KMS] Kernel modesetting enabled.
    [1719679.883] (WW) Falling back to old probe method for vesa
    [1719679.884] (WW) Falling back to old probe method for fbdev
    [1719679.884] (II) Loading sub module "fbdevhw"
    [1719679.885] (II) LoadModule: "fbdevhw"
    [1719679.894] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [1719679.958] (II) Module fbdevhw: vendor="X.Org Foundation"
    [1719679.959] 	compiled for 1.14.1, module version = 0.0.2
    [1719679.959] 	ABI class: X.Org Video Driver, version 14.1
    [1719679.961] (II) RADEON(0): Creating default Display subsection in Screen section
    	"Default Screen Section" for depth/fbbpp 24/32
    [1719679.961] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [1719679.970] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [1719679.970] (==) RADEON(0): Default visual is TrueColor
    [1719679.971] (==) RADEON(0): RGB weight 888
    [1719679.971] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [1719679.971] (--) RADEON(0): Chipset: "ATI Radeon VE/7000 QY (AGP/PCI)" (ChipID = 0x5159)
    [1719680.022] (II) Loading sub module "dri2"
    [1719680.022] (II) LoadModule: "dri2"
    [1719680.023] (II) Module "dri2" already built-in
    [1719680.023] (II) Loading sub module "exa"
    [1719680.023] (II) LoadModule: "exa"
    [1719680.025] (II) Loading /usr/lib/xorg/modules/libexa.so
    [1719680.071] (II) Module exa: vendor="X.Org Foundation"
    [1719680.071] 	compiled for 1.14.1, module version = 2.6.0
    [1719680.071] 	ABI class: X.Org Video Driver, version 14.1
    [1719680.071] (II) RADEON(0): KMS Color Tiling: disabled
    [1719680.071] (II) RADEON(0): KMS Color Tiling 2D: disabled
    [1719680.072] (II) RADEON(0): KMS Pageflipping: enabled
    [1719680.072] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [1719680.212] (II) RADEON(0): Output VGA-0 has no monitor section
    [1719680.416] (II) RADEON(0): EDID for output VGA-0
    [1719680.434] (II) RADEON(0): Printing probed modes for output VGA-0
    [1719680.435] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
    [1719680.436] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
    [1719680.437] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
    [1719680.437] (II) RADEON(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
    [1719680.463] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
    [1719680.463] (II) RADEON(0): Output VGA-0 connected
    [1719680.464] (II) RADEON(0): Using exact sizes for initial modes
    [1719680.464] (II) RADEON(0): Output VGA-0 using initial mode 1024x768
    [1719680.465] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [1719680.498] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:1000000 visible:f00000
    [1719680.498] (II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
    [1719680.498] (==) RADEON(0): DPI set to (96, 96)
    [1719680.498] (II) Loading sub module "fb"
    [1719680.498] (II) LoadModule: "fb"
    [1719680.500] (II) Loading /usr/lib/xorg/modules/libfb.so
    [1719680.523] (II) Module fb: vendor="X.Org Foundation"
    [1719680.524] 	compiled for 1.14.1, module version = 1.0.0
    [1719680.524] 	ABI class: X.Org ANSI C Emulation, version 0.4
    [1719680.524] (II) Loading sub module "ramdac"
    [1719680.524] (II) LoadModule: "ramdac"
    [1719680.525] (II) Module "ramdac" already built-in
    [1719680.525] (II) UnloadModule: "vesa"
    [1719680.545] (II) Unloading vesa
    [1719680.586] (II) UnloadModule: "fbdev"
    [1719680.586] (II) Unloading fbdev
    [1719680.588] (II) UnloadSubModule: "fbdevhw"
    [1719680.588] (II) Unloading fbdevhw
    [1719680.610] (--) Depth 24 pixmap format is 32 bpp
    [1719680.640] (II) RADEON(0): [DRI2] Setup complete
    [1719680.641] (II) RADEON(0): [DRI2]   DRI driver: radeon
    [1719680.642] (II) RADEON(0): [DRI2]   VDPAU driver: radeon
    [1719680.645] (II) RADEON(0): Front buffer size: 3072K
    [1719680.645] (II) RADEON(0): VRAM usage limit set to 11030K
    [1719680.773] (==) RADEON(0): Backing store disabled
    [1719680.790] (II) RADEON(0): Direct rendering enabled
    [1719680.790] (II) RADEON(0): Render acceleration enabled for R100 type cards.
    [1719680.790] (II) EXA(0): Driver allocated offscreen pixmaps
    [1719680.791] (II) EXA(0): Driver registered support for the following operations:
    [1719680.791] (II)         Solid
    [1719680.791] (II)         Copy
    [1719680.791] (II)         Composite (RENDER acceleration)
    [1719680.791] (II)         UploadToScreen
    [1719680.791] (II)         DownloadFromScreen
    [1719680.791] (II) RADEON(0): Acceleration enabled
    [1719680.792] (==) RADEON(0): Silken mouse enabled
    [1719680.829] (II) RADEON(0): Set up textured video
    [1719680.853] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [1719680.866] (II) RADEON(0): [XvMC] Extension initialized.
    [1719680.866] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [1719680.936] (--) RandR disabled
    [1719682.254] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [1719682.255] (II) AIGLX: enabled GLX_INTEL_swap_event
    [1719682.255] (II) AIGLX: enabled GLX_ARB_create_context
    [1719682.256] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [1719682.256] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [1719682.256] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [1719682.256] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [1719682.339] (II) AIGLX: Loaded and initialized radeon
    [1719682.339] (II) GLX: Initialized DRI2 GL provider for screen 0
    [1719682.772] (II) RADEON(0): Setting screen physical size to 270 x 203
    [1719685.773] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [1719685.788] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [1719685.803] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [1719685.804] (II) LoadModule: "evdev"
    [1719685.805] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [1719685.832] (II) Module evdev: vendor="X.Org Foundation"
    [1719685.833] 	compiled for 1.14.1, module version = 2.7.3
    [1719685.833] 	Module class: X.Org XInput Driver
    [1719685.833] 	ABI class: X.Org XInput driver, version 19.1
    [1719685.833] (II) Using input driver 'evdev' for 'Power Button'
    [1719685.834] (**) Power Button: always reports core events
    [1719685.835] (**) evdev: Power Button: Device: "/dev/input/event1"
    [1719685.836] (--) evdev: Power Button: Vendor 0 Product 0x1
    [1719685.837] (--) evdev: Power Button: Found keys
    [1719685.837] (II) evdev: Power Button: Configuring as keyboard
    [1719685.847] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [1719685.847] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [1719685.848] (**) Option "xkb_rules" "evdev"
    [1719685.849] (**) Option "xkb_model" "pc105"
    [1719685.849] (**) Option "xkb_layout" "us"
    [1719685.949] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [1719685.963] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [1719685.965] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [1719685.965] (II) Using input driver 'evdev' for 'Sleep Button'
    [1719685.978] (**) Sleep Button: always reports core events
    [1719685.979] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [1719685.980] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [1719685.980] (--) evdev: Sleep Button: Found keys
    [1719685.981] (II) evdev: Sleep Button: Configuring as keyboard
    [1719685.981] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input2/event2"
    [1719685.981] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
    [1719685.981] (**) Option "xkb_rules" "evdev"
    [1719685.981] (**) Option "xkb_model" "pc105"
    [1719685.994] (**) Option "xkb_layout" "us"
    [1719686.084] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [1719686.085] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [1719686.102] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [1719686.102] (II) Using input driver 'evdev' for 'Power Button'
    [1719686.103] (**) Power Button: always reports core events
    [1719686.104] (**) evdev: Power Button: Device: "/dev/input/event0"
    [1719686.105] (--) evdev: Power Button: Vendor 0 Product 0x1
    [1719686.105] (--) evdev: Power Button: Found keys
    [1719686.105] (II) evdev: Power Button: Configuring as keyboard
    [1719686.105] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [1719686.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [1719686.118] (**) Option "xkb_rules" "evdev"
    [1719686.119] (**) Option "xkb_model" "pc105"
    [1719686.119] (**) Option "xkb_layout" "us"
    [1719686.162] (II) config/udev: Adding drm device (/dev/dri/card0)
    [1719686.209] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
    [1719686.230] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [1719686.231] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [1719686.231] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [1719686.231] (**) AT Translated Set 2 keyboard: always reports core events
    [1719686.232] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
    [1719686.242] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [1719686.243] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [1719686.243] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [1719686.243] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
    [1719686.244] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [1719686.244] (**) Option "xkb_rules" "evdev"
    [1719686.245] (**) Option "xkb_model" "pc105"
    [1719686.245] (**) Option "xkb_layout" "us"
    [1719687.068] removing GPU device /sys/devices/pci0000:00/0000:00:0d.0/drm/card0 /dev/dri/card0
    [1719687.068] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:0d.0/drm/card0
    [1719687.068] failed to find screen to remove
    [1719687.068] (II) config/udev: Adding drm device (/dev/dri/card0)
    [1719687.069] removing GPU device /sys/devices/pci0000:00/0000:00:0d.0/drm/card0/card0-VGA-1 (null)
    [1720407.127] (II) AIGLX: Suspending AIGLX clients for VT switch
    [1720829.419] (II) evdev: AT Translated Set 2 keyboard: Close
    [1720829.440] (II) UnloadModule: "evdev"
    [1720829.467] (II) evdev: Power Button: Close
    [1720829.493] (II) UnloadModule: "evdev"
    [1720829.511] (II) evdev: Sleep Button: Close
    [1720829.525] (II) UnloadModule: "evdev"
    [1720829.527] (II) evdev: Power Button: Close
    [1720829.528] (II) UnloadModule: "evdev"
    [1720829.621] Server terminated successfully (0). Closing log file.
    

    dmesg.log

    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.10.9 (thomas@servA) (gcc version 4.7.3 (GCC) ) #1 SMP Thu Oct 31 12:21:56 CET 2013
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001efeffff] usable
    [    0.000000] BIOS-e820: [mem 0x000000001eff0000-0x000000001eff2fff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x000000001eff3000-0x000000001effffff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
    [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
    [    0.000000] SMBIOS 2.3 present.
    [    0.000000] DMI: Hewlett-Packard hp t5000 series/998h, BIOS 786R1 v1.07   12/10/2004
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] e820: last_pfn = 0x1eff0 max_arch_pfn = 0x100000
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
    [    0.000000] Base memory trampoline at [c0097000] 97000 size 16384
    [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x1e800000-0x1ebfffff]
    [    0.000000]  [mem 0x1e800000-0x1ebfffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x18000000-0x1e7fffff]
    [    0.000000]  [mem 0x18000000-0x1e7fffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
    [    0.000000]  [mem 0x00100000-0x003fffff] page 4k
    [    0.000000]  [mem 0x00400000-0x17ffffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x1ec00000-0x1efeffff]
    [    0.000000]  [mem 0x1ec00000-0x1efeffff] page 4k
    [    0.000000] BRK [0x01a8a000, 0x01a8afff] PGTABLE
    [    0.000000] RAMDISK: [mem 0x1eea4000-0x1efeefff]
    [    0.000000] ACPI: RSDP 000f6620 00014 (v00 I-BASE)
    [    0.000000] ACPI: RSDT 1eff3000 00028 (v01 I-BASE AWRDACPI 42302E31 AWRD 00000000)
    [    0.000000] ACPI: FACP 1eff3040 00074 (v01 I-BASE AWRDACPI 42302E31 AWRD 00000000)
    [    0.000000] ACPI: DSDT 1eff30c0 01C16 (v01 I-BASE AWRDACPI 00001000 MSFT 0100000C)
    [    0.000000] ACPI: FACS 1eff0000 00040
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 495MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 1eff0000
    [    0.000000]   low ram: 0 - 1eff0000
    [    0.000000] BRK [0x01a8b000, 0x01a8bfff] PGTABLE
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
    [    0.000000]   Normal   [mem 0x01000000-0x1efeffff]
    [    0.000000]   HighMem  empty
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00001000-0x0009afff]
    [    0.000000]   node   0: [mem 0x00100000-0x1efeffff]
    [    0.000000] On node 0 totalpages: 126858
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3994 pages, LIFO batch:0
    [    0.000000]   Normal zone: 960 pages used for memmap
    [    0.000000]   Normal zone: 122864 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x4008
    [    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
    [    0.000000] No local APIC present or hardware disabled
    [    0.000000] APIC: disable apic facility
    [    0.000000] APIC: switched to apic NOOP
    [    0.000000] nr_irqs_gsi: 16
    [    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [    0.000000] e820: [mem 0x1f000000-0xfffeffff] available for PCI devices
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 12 pages/cpu @dea94000 s26560 r0 d22592 u49152
    [    0.000000] pcpu-alloc: s26560 r0 d22592 u49152 alloc=12*4096
    [    0.000000] pcpu-alloc: [0] 0 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125866
    [    0.000000] Kernel command line: initrd=/boot/initrd root=UUID=9e788201-4f74-498b-a382-2639c4395fe2 rootfs=flat vga=795 quiet loglevel=3 rw BOOT_IMAGE=/boot/vmlinuz 
    [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 490672k/507840k available (6786k kernel code, 16760k reserved, 3101k data, 440k init, 0k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xdf7f0000 - 0xff7fe000   ( 512 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xdeff0000   ( 495 MB)
    [    0.000000]       .init : 0xc19a8000 - 0xc1a16000   ( 440 kB)
    [    0.000000]       .data : 0xc16a095d - 0xc19a7fc0   (3101 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc16a095d   (6786 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
    [    0.000000] NR_IRQS:2304 nr_irqs:256 16
    [    0.000000] CPU 0 irqstacks, hard=de406000 soft=de408000
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 798.046 MHz processor
    [    0.008037] Calibrating delay loop (skipped), value calculated using timer frequency.. 1596.09 BogoMIPS (lpj=3192184)
    [    0.008095] pid_max: default: 32768 minimum: 301
    [    0.016588] Mount-cache hash table entries: 512
    [    0.042991] Initializing cgroup subsys devices
    [    0.043058] Initializing cgroup subsys freezer
    [    0.043086] Initializing cgroup subsys blkio
    [    0.045466] CPU: Processor revision 1.5.0.2, 800 MHz
    [    0.045488] CPU: Code Morphing Software revision 4.5.2-12-11
    [    0.045502] CPU: 20040614 15:00 official release 4.5.2#1
    [    0.045519] CPU serial number disabled.
    [    0.045816] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    [    0.045816] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
    [    0.045816] tlb_flushall_shift: -1
    [    0.111960] Freeing SMP alternatives: 28k freed
    [    0.113308] ACPI: Core revision 20130328
    [    0.177952] ACPI: All ACPI Tables successfully acquired
    [    0.178312] ACPI: setting ELCR to 0200 (from 8e20)
    [    0.183687] smpboot: weird, boot CPU (#0) not listed by the BIOS
    [    0.183718] smpboot: SMP motherboard not detected
    [    0.183737] smpboot: Local APIC not detected. Using dummy APIC emulation.
    [    0.183747] smpboot: SMP disabled
    [    0.183875] Performance Events: 
    [    0.227153] Brought up 1 CPUs
    [    0.227195] smpboot: Total of 1 processors activated (1596.09 BogoMIPS)
    [    0.246269] devtmpfs: initialized
    [    0.265471] PM: Registering ACPI NVS region [mem 0x1eff0000-0x1eff2fff] (12288 bytes)
    [    0.273458] regulator-dummy: no parameters
    [    0.278413] NET: Registered protocol family 16
    [    0.289938] ACPI: bus type PCI registered
    [    0.292709] PCI: PCI BIOS revision 2.10 entry at 0xfa290, last bus=0
    [    0.292730] PCI: Using configuration type 1 for base access
    [    0.330878] bio: create slab <bio-0> at 0
    [    0.351820] ACPI: Added _OSI(Module Device)
    [    0.352217] ACPI: Added _OSI(Processor Device)
    [    0.352243] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.352263] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.358068] ACPI: EC: Look up EC in DSDT
    [    0.437907] ACPI: Interpreter enabled
    [    0.437996] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
    [    0.438047] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [    0.438081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568)
    [    0.438121] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568)
    [    0.438200] ACPI: (supports S0 S5)
    [    0.438215] ACPI: Using PIC for interrupt routing
    [    0.438984] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.440399] ACPI: No dock devices found.
    [    0.540898] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.547283] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
    [    0.547362] acpi PNP0A03:00: host bridge window [io  0x0d00-0x3fff] (ignored)
    [    0.547431] acpi PNP0A03:00: host bridge window [io  0x4100-0x4fff] (ignored)
    [    0.547494] acpi PNP0A03:00: host bridge window [io  0x5010-0xffff] (ignored)
    [    0.547555] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.547840] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    [    0.548000] acpi PNP0A03:00: host bridge window [mem 0x1f000000-0xffefffff] (ignored)
    [    0.548065] PCI: root bus 00: using default resources
    [    0.548125] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
    [    0.549944] PCI host bridge to bus 0000:00
    [    0.550046] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.550101] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
    [    0.550150] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [    0.550276] pci 0000:00:00.0: [1279:0395] type 00 class 0x060000
    [    0.550641] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xe80fffff]
    [    0.555455] pci 0000:00:00.1: [1279:0396] type 00 class 0x050000
    [    0.558876] pci 0000:00:00.2: [1279:0397] type 00 class 0x050000
    [    0.561562] pci 0000:00:00.3: [1279:0399] type 00 class 0x050000
    [    0.564217] pci 0000:00:09.0: [1106:3038] type 00 class 0x0c0300
    [    0.565142] pci 0000:00:09.0: reg 20: [io  0xe000-0xe01f]
    [    0.565402] pci 0000:00:09.0: supports D1 D2
    [    0.565487] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.566498] pci 0000:00:09.1: [1106:3038] type 00 class 0x0c0300
    [    0.566851] pci 0000:00:09.1: reg 20: [io  0xe100-0xe11f]
    [    0.567586] pci 0000:00:09.1: supports D1 D2
    [    0.567610] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.568094] pci 0000:00:09.2: [1106:3104] type 00 class 0x0c0320
    [    0.569005] pci 0000:00:09.2: reg 10: [mem 0xe8131000-0xe81310ff]
    [    0.569167] pci 0000:00:09.2: supports D1 D2
    [    0.569184] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.570687] pci 0000:00:0d.0: [1002:5159] type 00 class 0x030000
    [    0.571089] pci 0000:00:0d.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
    [    0.571334] pci 0000:00:0d.0: reg 14: [io  0xe200-0xe2ff]
    [    0.571380] pci 0000:00:0d.0: reg 18: [mem 0xe8120000-0xe812ffff]
    [    0.571448] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [    0.571554] pci 0000:00:0d.0: supports D1 D2
    [    0.572940] pci 0000:00:11.0: [1106:8231] type 00 class 0x060100
    [    0.573986] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
    [    0.574091] pci 0000:00:11.1: reg 20: [io  0xe300-0xe30f]
    [    0.575451] pci 0000:00:11.4: [1106:8235] type 00 class 0x068000
    [    0.576511] pci 0000:00:11.5: [1106:3058] type 00 class 0x040100
    [    0.576584] pci 0000:00:11.5: reg 10: [io  0xe600-0xe6ff]
    [    0.577121] pci 0000:00:11.5: reg 14: [io  0xe700-0xe703]
    [    0.577165] pci 0000:00:11.5: reg 18: [io  0xe800-0xe803]
    [    0.577624] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
    [    0.577682] pci 0000:00:12.0: reg 10: [io  0xe900-0xe9ff]
    [    0.577718] pci 0000:00:12.0: reg 14: [mem 0xe8130000-0xe81300ff]
    [    0.577832] pci 0000:00:12.0: supports D1 D2
    [    0.577849] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.578498] pci 0000:00:12.0: System wakeup disabled by ACPI
    [    0.579275] pci_bus 0000:00: on NUMA node 0
    [    0.579319] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [    0.579335] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [    0.582211] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 *15)
    [    0.585225] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
    [    0.587246] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
    [    0.591439] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
    [    0.597188] ACPI: Enabled 1 GPEs in block 00 to 0F
    [    0.597411] acpi root: \_SB_.PCI0 notify handler is installed
    [    0.598690] Found 1 acpi root devices
    [    0.603214] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.603741] vgaarb: loaded
    [    0.603756] vgaarb: bridge control possible 0000:00:0d.0
    [    0.611538] SCSI subsystem initialized
    [    0.611753] ACPI: bus type ATA registered
    [    0.613062] libata version 3.00 loaded.
    [    0.613865] ACPI: bus type USB registered
    [    0.614404] usbcore: registered new interface driver usbfs
    [    0.614707] usbcore: registered new interface driver hub
    [    0.615416] usbcore: registered new device driver usb
    [    0.616064] pps_core: LinuxPPS API ver. 1 registered
    [    0.616078] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    0.616138] PTP clock support registered
    [    0.620248] wmi: Mapper loaded
    [    0.620268] PCI: Using ACPI for IRQ routing
    [    0.620466] PCI: pci_cache_line_size set to 32 bytes
    [    0.623252] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
    [    0.623296] e820: reserve RAM buffer [mem 0x1eff0000-0x1fffffff]
    [    0.629252] Switching to clocksource pit
    [    0.631956] FS-Cache: Loaded
    [    0.632775] CacheFiles: Loaded
    [    0.633212] pnp: PnP ACPI init
    [    0.633295] ACPI: bus type PNP registered
    [    0.639388] system 00:00: [mem 0x000d6000-0x000d7fff] has been reserved
    [    0.639441] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
    [    0.639475] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
    [    0.639509] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
    [    0.639587] system 00:00: [mem 0x1eff0000-0x1effffff] could not be reserved
    [    0.639624] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
    [    0.639664] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.639698] system 00:00: [mem 0x00100000-0x1efeffff] could not be reserved
    [    0.639937] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.640065] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.644747] system 00:01: [io  0x04d0-0x04d1] has been reserved
    [    0.644810] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.646864] pnp 00:02: [dma 4]
    [    0.647272] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.649249] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.650629] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.651120] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.656683] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.659504] pnp 00:07: [dma 3]
    [    0.662069] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
    [    0.664222] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.664403] pnp: PnP ACPI: found 9 devices
    [    0.664423] ACPI: bus type PNP unregistered
    [    0.750023] Switching to clocksource acpi_pm
    [    0.751797] pci 0000:00:0d.0: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
    [    0.751876] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
    [    0.751895] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [    0.753010] NET: Registered protocol family 2
    [    0.762731] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.763119] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.763354] TCP: Hash tables configured (established 4096 bind 4096)
    [    0.763902] TCP: reno registered
    [    0.763961] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.764713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.767515] NET: Registered protocol family 1
    [    0.770843] RPC: Registered named UNIX socket transport module.
    [    0.770871] RPC: Registered udp transport module.
    [    0.770882] RPC: Registered tcp transport module.
    [    0.770892] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.778505] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 15
    [    0.778542] PCI: setting IRQ 15 as level-triggered
    [    0.781640] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    [    0.781674] PCI: setting IRQ 5 as level-triggered
    [    0.784468] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    [    0.784497] PCI: setting IRQ 10 as level-triggered
    [    0.785138] pci 0000:00:0d.0: Boot video device
    [    0.785213] PCI: CLS 32 bytes, default 32
    [    0.793694] Trying to unpack rootfs image as initramfs...
    [    1.663066] Freeing initrd memory: 1324k freed
    [    1.668808] Scanning for low memory corruption every 60 seconds
    [    1.670739] audit: initializing netlink socket (disabled)
    [    1.671131] type=2000 audit(1401879002.666:1): initialized
    [    1.674203] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    1.685599] VFS: Disk quotas dquot_6.5.2
    [    1.686052] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    1.689981] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    1.694956] NFS: Registering the id_resolver key type
    [    1.695726] Key type id_resolver registered
    [    1.695744] Key type id_legacy registered
    [    1.697510] fuse init (API version 7.22)
    [    1.699570] aufs 3.10-20130826
    [    1.699829] msgmni has been set to 960
    [    1.761341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    1.761380] io scheduler noop registered
    [    1.761397] io scheduler deadline registered (default)
    [    1.761557] io scheduler cfq registered
    [    1.763476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    1.763852] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    1.765031] vesafb: mode is 1280x1024x24, linelength=3840, pages=3
    [    1.765052] vesafb: protected mode interface info at c000:4e36
    [    1.765077] vesafb: pmi: set display start = c00c4eca, set palette = c00c4f16
    [    1.765085] vesafb: pmi: ports = e210 e216 e254 e238 e23c e25c e200 e204 e2b0 e2b2 e2b4 
    [    1.765129] vesafb: scrolling: redraw
    [    1.765149] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [    1.767539] vesafb: framebuffer at 0xe0000000, mapped to 0xdf880000, using 7680k, total 16384k
    [    1.835462] Console: switching to colour frame buffer device 160x64
    [    1.889762] fb0: VESA VGA frame buffer device
    [    1.891770] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    1.893520] ACPI: Power Button [PWRB]
    [    1.894620] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    1.894692] ACPI: Power Button [PWRF]
    [    1.895409] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
    [    1.895475] ACPI: Sleep Button [SLPF]
    [    1.898524] tsc: Marking TSC unstable due to TSC halts in idle
    [    1.898630] ACPI: acpi_idle registered with cpuidle
    [    1.917978] Linux agpgart interface v0.103
    [    1.946925] brd: module loaded
    [    1.951708] loop: module loaded
    [    1.959352] pata_via 0000:00:11.1: version 0.3.4
    [    1.966992] scsi0 : pata_via
    [    1.967970] scsi1 : pata_via
    [    1.970034] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe300 irq 14
    [    1.970064] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe308 irq 15
    [    1.979079] libphy: Fixed MDIO Bus: probed
    [    1.979915] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
    [    1.980151] Atheros(R) L2 Ethernet Driver - version 2.2.3
    [    1.980162] Copyright (c) 2007 Atheros Corporation.
    [    1.980454] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
    [    1.981734] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
    [    1.981817] v1.01-e (2.4 port) Sep-11-2006  Donald Becker <becker@scyld.com>
    [    1.981817]   http://www.scyld.com/network/drivers.html
    [    1.982052] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
    [    1.982270] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [    1.982279] e100: Copyright(c) 1999-2006 Intel Corporation
    [    1.982353] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [    1.982361] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [    1.982438] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k
    [    1.982447] igb: Copyright (c) 2007-2013 Intel Corporation.
    [    1.982516] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
    [    1.982525] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
    [    1.982650] jme: JMicron JMC2XX ethernet driver version 1.0.8
    [    1.982785] sky2: driver version 1.30
    [    1.983001] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
    [    1.983120] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
    [    1.983772] tlan: ThunderLAN driver v1.17
    [    1.983835] tlan: 0 devices installed, PCI: 0  EISA: 0
    [    1.984398] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
    [    1.990891] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xe8130000, 00:13:21:ee:60:80, IRQ 15
    [    1.992767] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
    [    1.993639] usbcore: registered new interface driver hwa-rc
    [    1.994026] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.994042] ehci-pci: EHCI PCI platform driver
    [    1.995973] ehci-pci 0000:00:09.2: EHCI Host Controller
    [    1.996620] ehci-pci 0000:00:09.2: new USB bus registered, assigned bus number 1
    [    1.997369] ehci-pci 0000:00:09.2: irq 10, io mem 0xe8131000
    [    2.008338] ehci-pci 0000:00:09.2: USB 2.0 started, EHCI 1.00
    [    2.011284] hub 1-0:1.0: USB hub found
    [    2.011594] hub 1-0:1.0: 4 ports detected
    [    2.020964] ehci-platform: EHCI generic platform driver
    [    2.021153] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.021288] uhci_hcd: USB Universal Host Controller Interface driver
    [    2.022155] uhci_hcd 0000:00:09.0: UHCI Host Controller
    [    2.022586] uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
    [    2.022752] uhci_hcd 0000:00:09.0: irq 15, io base 0x0000e000
    [    2.025853] hub 2-0:1.0: USB hub found
    [    2.025934] hub 2-0:1.0: 2 ports detected
    [    2.030286] uhci_hcd 0000:00:09.1: UHCI Host Controller
    [    2.031485] uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3
    [    2.031966] uhci_hcd 0000:00:09.1: irq 5, io base 0x0000e100
    [    2.037755] hub 3-0:1.0: USB hub found
    [    2.037838] hub 3-0:1.0: 2 ports detected
    [    2.041729] usbcore: registered new interface driver hwa-hc
    [    2.042561] usbcore: registered new interface driver wusb-cbaf
    [    2.044254] usbcore: registered new interface driver cdc_acm
    [    2.044271] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [    2.044444] usbcore: registered new interface driver usb-storage
    [    2.045187] usbcore: registered new interface driver ums-alauda
    [    2.045354] usbcore: registered new interface driver ums-cypress
    [    2.045571] usbcore: registered new interface driver ums-datafab
    [    2.045701] usbcore: registered new interface driver ums-freecom
    [    2.045757] usbcore: registered new interface driver ums-isd200
    [    2.045804] usbcore: registered new interface driver ums-jumpshot
    [    2.045851] usbcore: registered new interface driver ums-karma
    [    2.045898] usbcore: registered new interface driver ums-onetouch
    [    2.046198] usbcore: registered new interface driver ums-sddr09
    [    2.046543] usbcore: registered new interface driver ums-sddr55
    [    2.046692] usbcore: registered new interface driver ums-usbat
    [    2.047489] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    2.047504] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    2.048559] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.050173] mousedev: PS/2 mouse device common for all mice
    [    2.053277] rtc_cmos 00:03: RTC can wake from S4
    [    2.055273] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    2.056145] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
    [    2.057164] cpuidle: using governor ladder
    [    2.057905] cpuidle: using governor menu
    [    2.057975] sdhci: Secure Digital Host Controller Interface driver
    [    2.057983] sdhci: Copyright(c) Pierre Ossman
    [    2.058086] wbsd: Winbond W83L51xD SD/MMC card interface driver
    [    2.058094] wbsd: Copyright(c) Pierre Ossman
    [    2.058319] usbcore: registered new interface driver ushc
    [    2.058331] sdhci-pltfm: SDHCI platform and OF driver helper
    [    2.059772] hidraw: raw HID events driver (C) Jiri Kosina
    [    2.060581] usbcore: registered new interface driver usbhid
    [    2.060595] usbhid: USB HID core driver
    [    2.061558] TCP: cubic registered
    [    2.061594] NET: Registered protocol family 17
    [    2.062168] Key type dns_resolver registered
    [    2.062811] Using IPI No-Shortcut mode
    [    2.064604] registered taskstats version 1
    [    2.078309] rtc_cmos 00:03: setting system clock to 2014-06-04 10:50:03 UTC (1401879003)
    [    2.078569] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    2.078580] EDD information not available.
    [    2.081434] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [    2.138952] ata1.00: ATA-6: IC25N080ATMR04-0, MO4OAD4A, max UDMA/100
    [    2.139005] ata1.00: 156301488 sectors, multi 0: LBA48 
    [    2.139072] ata1.00: limited to UDMA/33 due to 40-wire cable
    [    2.150598] ata1.00: configured for UDMA/33
    [    2.154301] scsi 0:0:0:0: Direct-Access     ATA      IC25N080ATMR04-0 MO4O PQ: 0 ANSI: 5
    [    2.157859] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [    2.165905] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    2.167827] ata2: port disabled--ignoring
    [    2.171213] sd 0:0:0:0: [sda] Write Protect is off
    [    2.171247] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.174939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.252307]  sda: sda1
    [    2.261450] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.261706] Freeing unused kernel memory: 440k freed
    [    2.264893] Write protecting the kernel text: 6788k
    [    2.265345] Write protecting the kernel read-only data: 2724k
    [    3.537493] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
    [    3.542814] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
    [    3.652836] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    5.056542] systemd[1]: Failed to insert module 'ipv6'
    [    6.875221] [drm] Initialized drm 1.1.0 20060810
    [    7.053322] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [    8.047422] systemd-udevd[132]: starting version 206
    [   11.655174] parport_pc: VIA 686A/8231 detected
    [   11.655213] parport_pc: probing current configuration
    [   11.655266] parport_pc: Current parallel port base: 0x378
    [   11.655421] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
    [   11.812915] parport_pc: VIA parallel port: io=0x378, irq=7
    [   12.265611] [drm] radeon kernel modesetting enabled.
    [   12.265881] checking generic (e0000000 1000000) vs hw (e0000000 8000000)
    [   12.265898] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
    [   12.266986] Console: switching to colour dummy device 80x25
    [   12.315985] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    [   12.316229] PCI: setting IRQ 11 as level-triggered
    [   12.448484] [drm] initializing kernel modesetting (RV100 0x1002:0x5159 0x1002:0x5159).
    [   12.448700] [drm] register mmio base: 0xE8120000
    [   12.448714] [drm] register mmio size: 65536
    [   12.450448] radeon 0000:00:0d.0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (16M used)
    [   12.450664] radeon 0000:00:0d.0: GTT: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF
    [   12.451523] [drm] Detected VRAM RAM=128M, BAR=128M
    [   12.451545] [drm] RAM width 32bits DDR
    [   12.520475] [TTM] Zone  kernel: Available graphics memory: 246232 kiB
    [   12.520515] [TTM] Initializing pool allocator
    [   12.521541] [drm] radeon: 16M of VRAM memory ready
    [   12.521579] [drm] radeon: 512M of GTT memory ready.
    [   12.521719] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [   12.579648] [drm] PCI GART of 512M enabled (table at 0x000000001A280000).
    [   12.641362] radeon 0000:00:0d.0: WB disabled
    [   12.641444] radeon 0000:00:0d.0: fence driver on ring 0 use gpu addr 0x00000000c0000000 and cpu addr 0xd9cb7000
    [   12.641479] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   12.641487] [drm] Driver supports precise vblank timestamp query.
    [   12.641645] [drm] radeon: irq initialized.
    [   12.642003] [drm] Loading R100 Microcode
    [   13.062172] [drm] radeon: ring at 0x00000000C0001000
    [   13.062973] [drm] ring test succeeded in 0 usecs
    [   13.063965] [drm] ib test succeeded in 0 usecs
    [   13.091259] [drm] Radeon Display Connectors
    [   13.091295] [drm] Connector 0:
    [   13.091306] [drm]   VGA-1
    [   13.091322] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
    [   13.091331] [drm]   Encoders:
    [   13.091340] [drm]     CRT1: INTERNAL_DAC1
    [   13.336249] [drm] fb mappable at 0xE0040000
    [   13.336282] [drm] vram apper at 0xE0000000
    [   13.336290] [drm] size 786432
    [   13.336299] [drm] fb depth is 8
    [   13.336306] [drm]    pitch is 1024
    [   13.336925] fbcon: radeondrmfb (fb0) is primary device
    [   13.776565] Console: switching to colour frame buffer device 128x48
    [   13.788721] radeon 0000:00:0d.0: fb0: radeondrmfb frame buffer device
    [   13.788737] radeon 0000:00:0d.0: registered panic notifier
    [   13.952195] [drm] Initialized radeon 2.33.0 20080528 for 0000:00:0d.0 on minor 0
    [   13.955410] snd_via82xx 0000:00:11.5: setting latency timer to 64
    [   16.466056] ppdev: user-space parallel port driver
    
    #8242

    Warped Rudi
    Keymaster

    Could you guys please stop posting these massive logs ? There are free services available, where you can upload this stuff and provide a link here.

    #8243

    rustynail73
    Member

    Ok I’m sorry
    Any suggestion about my trouble?

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.