GeeXboX

How to setup CEC the right way?

April 23rd, 2014

Home › Forums › GeeXboX on ARM SoCs › How to setup CEC the right way?

Tagged:

This topic contains 2 replies, has 2 voices, and was last updated by duri 14 hours, 32 minutes ago.

Viewing 3 posts – 1 through 3 (of 3 total)
  • Author
    Posts
  • April 23, 2014 at 23:29 #7996

    duri
    Member

    I have geexbox nightly running on my Utilite.
    If I connect it to my TVs HDMI1 Port i am able to control XBMC over CEC.
    But if I connect it to the HDMI in port of my Teufel Cinebar 11 im not able to control XBMC over CEC anymore.
    I have tried to change the HDMI port in the XBMC settings or also change the connected device from tv to AV Receiver. But i am not able to make it work.
    I also own a Rasperry Pi with Raspbmc and this is working fine. Don’t need to change any settings there. There is also no option to change the HDMI port.
    Is libcec not working well on the Utilite yet? Anybody knows how to make it work?

    April 24, 2014 at 19:22 #7999

    Warped Rudi
    Moderator

    CEC support on iMX hardware is not ready for prime time yet.

    April 24, 2014 at 19:51 #8002

    duri
    Member

    Ok good to know. Hope it will work fine when the stable Gotham will be released

  • Author
    Posts
Viewing 3 posts – 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Comments are closed.