DVB-S2 on CUBOX i4 doesn’t work
Home › Forums › GeeXboX on ARM SoCs › DVB-S2 on CUBOX i4 doesn’t work
This topic contains 3 replies, has 3 voices, and was last updated by
lpraderi 1 month, 3 weeks ago.
-
AuthorPosts
-
Dear Forum,
today i received my ordered DVB-S2-Card. It is a DVBSKy S960 DVB-S/S2 USB, HDTV, remote, USALS.
So i plugged it in and restarted my cubox, which stopps working, until i remove the DVB-S2 receiver.
Is it a defective Device? Am I doing something wrong? Which DVB-S2 device should I use? Any advices?
I also tested OpenELEC which had the same problem.
I am using the newest Snapshot (geexbox-devel-20140707-r9600c65.cuboxi.img)
-
This topic was modified 1 month, 3 weeks ago by
frankey82.
do you have some log files ?
which log files do you need and where are they located?
sry, noob here
DVBSky on Linux:
http://www.linuxtv.org/wiki/index.php/DVBSKY_S960“At least up to Kernel 3.7.10 the driver is not included and has to be installed manually:
See DVBSky wiki page (http://www.linuxtv.org/wiki/index.php/DVBSky) .
Firmware: dvb-fe-ds3103.fw (Download: http://www.dvbsky.net/Support.html)$ dmesg | grep -i dvb [ 13.063770] usb 1-4: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state [ 13.063808] usb 1-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 13.063818] DVB: registering new adapter (DVBSky S960/S860) [ 13.063847] usbcore: registered new interface driver dvb_usb_dvbsky [ 13.065088] dvbsky_usb MAC address=00:17:42:54:96:0c [ 13.065092] usb 1-4: dvb_usb_v2: MAC address: 00:17:42:54:96:0c [ 13.276822] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)... [ 14.375542] usb 1-4: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)... [ 14.405386] Registered IR keymap rc-dvbsky [ 14.405459] input: DVBSky S960/S860 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/rc/rc0/input15 [ 14.405515] rc0: DVBSky S960/S860 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/rc/rc0 [ 14.405518] usb 1-4: dvb_usb_v2: schedule remote query interval to 300 msecs [ 14.405520] usb 1-4: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected-
This reply was modified 1 month, 3 weeks ago by
lpraderi.
-
This topic was modified 1 month, 3 weeks ago by
-
AuthorPosts
You must be logged in to reply to this topic.