GeeXboXgoogle00

Cubieboard – Geexbox – NAND

April 28th, 2014

Home › Forums › GeeXboX on ARM SoCs › Cubieboard – Geexbox – NAND

Tagged: ,

This topic contains 2 replies, has 2 voices, and was last updated by kudzu 4 months, 1 week ago.

Viewing 3 posts – 1 through 3 (of 3 total)
  • Author
    Posts
  • April 28, 2014 at 22:03 #8013

    kudzu
    Member

    Cubieboard has got 4 GB of NAND so it is sin to use SD card for system. But I’m not be able to copy geexbox to NAND. I’ve tried to use “make-sdcard…” with “/dev/nand” (booting cubieboard with Debian) but there were some errors (i.e. in /dev/ where nanda and nandb while fdisk made nand1 and nand2).
    Could someone can prepare script for NAND?

    April 29, 2014 at 11:37 #8014

    Warped Rudi
    Moderator

    I have not tried to put Geexbox on the Cubieboard NAND. I prefer to keep the Android there untouched as I may need it eventually. So I guess nobody has ever done this.

    April 29, 2014 at 13:26 #8015

    kudzu
    Member

    I removed Android without sorrow;) It is unusable for me. You can put it back simple way by official tools.
    Ok, so I will try with
    that.

  • Author
    Posts
Viewing 3 posts – 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Comments are closed.