[Cubox-i] Problem with smbd after update

[grisu68Member]

Hi,

after updating to the latest snapshot of 11 Apr the Samba-Server is not working anymore.

root@geexbox:~# systemctl start smbd
root@geexbox:~# systemctl status smbd
smbd.service – Samba File Sharing Service
Loaded: loaded (/usr/lib/systemd/system/smbd.service; disabled)
Active: inactive (dead)
start condition failed at Sat 2015-04-11 23:13:07 BST; 10s ago
ConditionPathExists=/run/geexbox/network/smbd was not met

root@geexbox:~# uname -a
Linux geexbox 3.14.14 #1 SMP Sat Apr 11 08:20:47 IDT 2015 armv7l GNU/Linux
root@geexbox:~# which smb
root@geexbox:~# which smbd
/sbin/smbd
root@geexbox:~# ldd /sbin/smbd
libcrypt.so.1 => /lib/libcrypt.so.1 (0x76872000)
libresolv.so.2 => /lib/libresolv.so.2 (0x76856000)
libdl.so.2 => /lib/libdl.so.2 (0x7684b000)
libwbclient.so.0 => /lib/libwbclient.so.0 (0x76824000)
libz.so.1 => /lib/libz.so.1 (0x76809000)
libc.so.6 => /lib/libc.so.6 (0x766db000)
/lib/ld-linux-armhf.so.3 (0x768a9000)

root@geexbox:~# systemctl status smbd
smbd.service – Samba File Sharing Service
Loaded: loaded (/usr/lib/systemd/system/smbd.service; disabled)
Active: inactive (dead)
start condition failed at Sat 2015-04-11 23:24:20 BST; 7s ago
ConditionPathExists=/run/geexbox/network/smbd was not met

The file /run/geexbox/network/smbd is indeed missing.

root@geexbox:~# ls -l /run/geexbox/network
total 0
-rw-r-r- 1 root root 0 Apr 11 22:57 connman
-rw-r-r- 1 root root 0 Apr 11 22:57 httpd
-rw-r-r- 1 root root 0 Apr 11 22:57 ntpd
-rw-r-r- 1 root root 0 Apr 11 22:57 sshd
-rw-r-r- 1 root root 0 Apr 11 22:57 telnetd
root@geexbox:~#

I have also installed the geexbox-devel-20150411-r78ac847.cuboxi.tar.xz with the same result.

Any advice for me?

best regards, grisu

[Warped RudiModerator]

You need to enable Samba. Either via our XBMC network addon found in the programs menu or by manually setting SAMBA_SERVER=”true” in /etc/network. See also this thread.

[grisu68Member]

Thanks for your help. It is now working

[Author]

Posts