TV Output Standard (ntsc/pal/secam) ?

November 26th, 2011 Leave a comment Go to comments

This topic has 2 voices, contains 1 reply, and was last updated by tomlohave 177 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)

Author	Posts
Author	Posts
November 26, 2011 at 05:18 #1779
foxmclout	Geexbox 2.0 Default is ntsc how to switch the TV Output Standard (ntsc / pal / secam)? need a PAL
November 26, 2011 at 07:10 #1789
tomlohave	not tested (no such device) switch to vt2 (see documentation) and try xrandr –output TV1 –set mode PAL if it fails, report the output of “xrandr” Thanks

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

GeeXboX