Topspeed Cyberlink Remote Control

December 8th, 2012

Home Forums GeeXboX for PC Topspeed Cyberlink Remote Control

This topic contains 2 replies, has 2 voices, and was last updated by  mrwho 1 year, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #5504

    mrwho
    Member

    Hello there!

    A month ago I ordered <a href=”http://www.ebay.co.uk/itm/180760072207?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649″>this remote</a> from Ebay. It was very cheap (around 10€, including p&p). It arrived a few days ago, but I didn’t have any success putting it up to work with GB3.

    I tested it on my Win7 machine and it works fine. Tried with <a href=”http://wiki.xbmc.org/index.php?title=HOW-TO:Configure_your_Cyberlink_Media_Centre_Remote_on_Linux”>this</a> and <a href=”http://forum.xbmc.org/showthread.php?tid=130285″>this</a> tutorials, but neither of those tutorials applies to Geexbox – either the remote doesn’t show up on /proc/bus/input/devices or there isn’t a /dev/input/by-path device I can use.

    If I run lsusb, the device is recognized as:

    Bus 005 Device 002: ID 0766:0204 Jess-Link Products Co., Ltd TopSpeed Cyberlink Remote Control

    Any tips on what I can try next?

    Thanks!

    #5505

    tomlohave
    Moderator

    hello,

    can you add a file  in /etc/eventlircd.d/ called 03_0766_0204.evmap

    caontaining :

    KEY_1 = KEY_NUMERIC_1
     KEY_2 = KEY_NUMERIC_2
     KEY_3 = KEY_NUMERIC_3
     KEY_4 = KEY_NUMERIC_4
    KEY_5 = KEY_NUMERIC_5
     KEY_6 = KEY_NUMERIC_6
     KEY_7 = KEY_NUMERIC_7
     KEY_8 = KEY_NUMERIC_8
     KEY_9 = KEY_NUMERIC_9
     KEY_0 = KEY_NUMERIC_0
     shift+KEY_8 = KEY_NUMERIC_STAR
     shift+KEY_3 = KEY_NUMERIC_POUND
     KEY_UP = KEY_UP
     KEY_DOWN = KEY_DOWN
     KEY_LEFT = KEY_LEFT
     KEY_RIGHT = KEY_RIGHT
     KEY_ENTER = KEY_OK
     KEY_DELETE = KEY_DELETE
     KEY_BACK = KEY_EXIT
     KEY_ESC = KEY_DELETE
     KEY_HOME = KEY_HOME
     KEY_MEDIA = KEY_PROG1
     KEY_SLEEP = KEY_POWER
     KEY_VOLUMEDOWN = KEY_VOLUMEDOWN
     KEY_VOLUMEUP = KEY_VOLUMEUP
     KEY_MUTE = KEY_MUTE
     KEY_CHANNELUP = KEY_CHANNELUP
     KEY_CHANNELDOWN = KEY_CHANNELDOWN
     KEY_PLAY = KEY_PLAY
     KEY_RECORD = KEY_RECORD
     KEY_REWIND = KEY_REWIND
     KEY_PAUSE = KEY_PAUSE
     KEY_FASTFORWARD = KEY_FASTFORWARD
     KEY_PREVIOUSSONG = KEY_PREVIOUS
     KEY_STOPCD = KEY_STOP
     KEY_NEXTSONG = KEY_NEXT
     KEY_DVD = KEY_DVD
     KEY_MP3 = KEY_AUDIO
     KEY_CAMERA = KEY_CAMERA
     KEY_VIDEO = KEY_VIDEO
     KEY_RADIO = KEY_ZOOM
     KEY_AUDIO = KEY_AUDIO
     KEY_TV = KEY_TV
     KEY_TV2 = KEY_EPG
     KEY_TEXT = KEY_TEXT
     KEY_LAST = KEY_LAST
     KEY_SUBTITLE = KEY_SUBTITLE
     KEY_PROGRAM = KEY_SUBTITLE
     KEY_LANGUAGE = KEY_LANGUAGE
     KEY_ANGLE = KEY_ANGLE
     KEY_MODE = KEY_MODE
     KEY_PROPS = KEY_INFO
     KEY_MENU = KEY_MENU
     KEY_RED = KEY_RED
     KEY_GREEN = KEY_GREEN
     KEY_YELLOW = KEY_YELLOW
     KEY_BLUE = KEY_BLUE
    then edit /lib/udev/rules.d/98-eventlircd.rules  (l74)
    and add :
    ENV{ID_VENDOR_ID}=="0766", ENV{ID_MODEL_ID}=="0204", \
      ENV{eventlircd_enable}="true", \  
      ENV{eventlircd_evmap}="03_$env{ID_VENDOR_ID}_$env{ID_MODEL_ID}.evmap"
    

    reboot

    #5512

    mrwho
    Member

    Hello!

    The evmap file already exists, i’ve modified it acordingly.  The rules file already contains that string.

    Have a nice sunday!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Comments are closed.