Reboot problem Pandaboard

January 2nd, 2013

Home Forums GeeXboX on ARM SoCs Reboot problem Pandaboard

This topic contains 4 replies, has 4 voices, and was last updated by  ivanmayes 1 year, 8 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #5616

    a649m
    Member

    Hi,

    I use GeeXboX on my pandaboard but if I try to change to VT-2 (via Crtl + Alt + F2) almost instantly after the login, my panda reboots.

    This happens everytime and I haven’t found a way to access VT-2 somehow by now.

    I don’t have another USB Keyboard (mine is a Microsoft Wireless Keyboard) so I wasn’t able to test if it relies on the keyboard or something.

    Is there something I could do about it?

    Kind regards

     

    #5644

    tomlohave
    Moderator

    hum,

    I have never noticed that cause I use telnet or ssh to access panda.

    #6080

    uffe
    Member

    I have exactly the same problem. I need to add the password of the wireless network to the /etc/network file,  so I can’t use ssh… Any solution in sight?

    #6088

    tomlohave
    Moderator

    you can use the addon under program to add  /edit /etc/network, but I’m pretty sure it won’t work without udhcpcd

    #6093

    ivanmayes
    Member

    Having the same issue, after hitting ctrl + alt + F2, it flashes to the terminal then immediately reloads xbmc no matter what I press.  Can’t get to the terminal to get wifi working to connect via telnet or ssh.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Comments are closed.