Newbie problem.

June 14th, 2012

Home Forums GeeXboX for PC Newbie problem.

This topic contains 5 replies, has 2 voices, and was last updated by  tomlohave 2 years, 2 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #4006

    cpeders
    Member

    Hey.

    Yesterday I set up a HP pavilion pv6 to boot from USB-stick.
    Geexbox then boots nice and quick. But the menu is really slow. When pressing a button, it takes more than a second until anything happends. Using the pointer is useless as well because of the delay.
    Any suggestions?

    #4009

    tomlohave
    Moderator

    problem with your video card ?
    model of your video card ?
    test devel iso : http://download.openbricks.org/

    #4055

    cpeders
    Member

    So, then I had time to sit down with the computers again….
    The videocard is a ATI mobility Radeon HD 4530

    #4056

    tomlohave
    Moderator

    you need fglrx drivers
    test a devel iso … or 2.0.1 , not sure fglrx drivers works with 2.0.1

    #4057

    cpeders
    Member

    There is a lot to choose from on openbricks… Should I just start from the top?

    #4058

    tomlohave
    Moderator

    have a try with r14477

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.

Comments are closed.