HARDWARE

Home Forums GeeXboX for PC HARDWARE

This topic contains 8 replies, has 2 voices, and was last updated by  tomlohave 6 months ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #11540

    eca
    Participant

    Just because you have a 64bit CPU dont mean your HARDWARE IS 64bit..
    Esp. in Laptops..

    HOW to get to the Linux config system..the Audio dont work, or is there a module to get?

    Getting the info on laptop isnt easy either, as the Cmos dont tell me, and your program dont either..
    I will look up the hardware online, Someplace..

    #11541

    eca
    Participant

    You need to update the Download files, Not current.
    Not allot of chat here, is there?

    #11544

    tomlohave
    Keymaster

    Hello,
    Well, if you have a 64 bits cpu (x86-64), our build should work.
    Speaking about audio, if you can provide us some hardware infos, it could help …

    Speaking about our presence, we are doing this distro in our spare time, but we have a work too, a family …

    #11550

    eca
    Participant

    HP 2000-2b09WM Notebook PC

    http://support.hp.com/us-en/drivers/selfservice/HP-2000-2b00-Notebook-PC-series/5296210/model/5309523

    Realtek High-Definition (HD) Audio Driver

    i have the 32bit installation, as the 64 bit seemed not working well..

    I didnt think realtek drivers would be a problem..
    ================================================================
    So this is in spare time, Ok..nice to know..
    Its a good program so far,
    Im setting this up for a customer..

    #11551

    eca
    Participant
    #11552

    eca
    Participant

    I have VGA and HDMI output..
    The audio on the laptop seems not working..and was hoping to get the HDMI audio..its not working either..

    #11553

    tomlohave
    Keymaster

    Well that’s maybe because audio is muted.
    try to install an addon like audiomixer, and verify that nothing is muted

    #11554

    eca
    Participant

    the settings for Video and Audio

    Audio option…HD-audio generic, HDMI(not working)
    …………..Hd-Audio Generic, ALC269VC analog(not working)

    Video out = 1378×768 Three options all the same..Switching did nothing to send Data to external monitor..

    Output selection is DEFAULT and default…first latter changed..
    Previous version3.1(??) I had the RGB working..

    • This reply was modified 6 months ago by  eca.
    #11559

    tomlohave
    Keymaster

    hum,
    xorg problem ?
    without output , it’s not easy, but maybe you can access it via telnet, or attaching a keyboard, and switching to vt1, can you post the results of :
    cat /var/log/Xorg.0.log

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.