Base support for SolidRun CuBox-i Home › Forums › GeeXboX on ARM SoCs › Base support for SolidRun CuBox-i Tagged: SolidRun CubBox-i This topic contains 1 reply, has 2 voices, and was last updated by Warped Rudi 3 years, 12 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts September 27, 2013 at 07:17 #7032 nickolaevKeymaster Hello, as of r16414 we have a base (console only) support for the new CuBox-i from SolidRun, based on Freescale iMX6. Now, we have only the developer boards, as described in CarrierOne. The procedure to get it working is as usual: make base-imx6-cuboxi_defconfig make cd binaries/binaries.cuboxi/ sudo ./make-sdcard /dev/sdg ./base-devel-20130927-r16414.cuboxi.tar.bz2 Currently this is only the basic framebuffer console, eth0 and dhcp working. Useful for further bringing up the XBMC. regards, Nikolay Nikolaev September 27, 2013 at 13:39 #7036 Warped RudiKeymaster Nice ! I hope my CarrierOne will arrive soon… Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.